Instrukcja obsługi DeWalt DW7187

DeWalt Maszyna do piłowania DW7187

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla DeWalt DW7187 (28 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/28
DW7187 Miter Saw Laser System
Système laser pour scie à onglets DW7187
Sistema láser para sierra ingletadora DW7187
INSTRUCTION MANUAL
GUIDE D'UTILISATION
MANUAL DE INSTRUCCIONES
INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA
DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO
ANTES DE USAR EL PRODUCTO.
If you have questions or comments, contact us.
Pour toute question ou tout commentaire, nous contacter.
Si tiene dudas o comentarios, contáctenos.
1-800-4-DEWALT • www.dewalt.com
English
1
IF YOU HAVE ANY QUESTIONS OR COMMENTS ABOUT
THIS OR ANY DEWALT TOOL, CALL US TOLL FREE AT: 1-800-
4-DEWALT (1-800-433-9258)
Safety Instructions for Lasers
WARNING! Read and understand all instructions.
Failure to follow all instructions listed below may result
in electric shock, fire and/or serious personal injury.
WARNING: For your own safety, read the tool
instruction manual before using any accessory. Failure
to heed these warnings may result in personal injury and
serious damage to the tool and the accessory. When
servicing this tool, use only identical replacement parts.
SAVE THESE INSTRUCTIONS
WARNING! Laser Radiation Exposure. Do not disassem-
ble or modify the laser. There are no user serviceable parts
inside. Serious eye injury could result.
WARNING: Hazardous Radiation. Use of controls or adjust-
ments or performance of procedures other than those specified
herein may result in hazardous radiation exposure.
• Do not operate the laser in explosive atmospheres, such
as in the presence of flammable liquids, gases, or dust.
Power tools create sparks which may ignite the dust or fumes.
• Store idle laser out of reach of children and other
untrained persons. Lasers are dangerous in the hands of
untrained users.
• Tool service must be performed only by qualified repair
personnel. Service or maintenance performed by unqual-
ified personnel may result in injury. To locate your nearest
DEWALT service center call 1-800-4-DEWALT (1-800-433-
9258) or go to http://www.dewalt.com on the Internet.
• Do not use optical tools such as a telescope or transit to
view the laser beam. Serious eye injury could result.
• Do not place the laser in a position which may cause any-
one to intentionally or unintentionally stare into the laser
beam. Serious eye injury could result.
• Turn the laser off when it is not in use. Leaving the laser
on increases the risk of staring into the laser beam.
• Do not disassemble the laser or laser power supply.
There are no user serviceable parts inside.
• Do not modify the laser in any way. Modifying the tool may
result in Hazardous Laser Radiation Exposure.
• Do not operate the laser around children or allow
children to operate the laser. Serious eye injury may result.
• Do not remove or deface warning labels. Removing labels
increases the risk of exposure to radiation.
•Use Miter Saw Laser System only with specifically
designated DEWALT Miter Saws. Use of Miter Saw Laser
System on non-designated tools may create a risk of injury.
•Use Laser part # 623020-00 only with Laser Power Supply
part # 618212-00. Use of Laser with another laser power
supply may create injury.
•Use Laser Power Supply part # 618212-00 only with Laser
part # 623020-00. Use of Laser with another laser power
supply may create injury.
CAUTION: Use of controls or adjustments or perform-
ance of procedures other than those specified herein may
result in Hazardous Radiation Exposure.
• The label on your tool may include the following symbols.
V ..................volts mW ........milliwatts
......Laser warning nm ..........wavelength in
.................... ..............symbol nanometers
II ..................Class II Laser IIIa ..........Class IIIa Laser
................alternating current ........direct current
W..................watts Hz ..........hertz
English
2
WARNING LABELS
For your convenience and safety, the following label is on your
laser (Fig. 1).
CAUTION: LASER
RADIATION – DO
NOT STARE INTO
BEAM. CLASS 2
LASER PRODUCT.
CAUTION: CLASS 2
LASER RADIATION
WHEN OPEN DO
NOT STARE INTO
THE BEAM.
Laser
Information
The DW7187 Miter Saw
Laser System is a Class 2
laser product and complies
with 21CFR 1040.10 and
1040.11 except for devia-
tions pursuant to laser notice No. 50, dated July 26, 2001.
Installation of Miter Saw Laser
System
WARNING: Read all instructions for the Installation of Laser
Power Supply and the Installation of Laser before proceeding
with the Installation of the Miter Saw Laser System.
INSTALLATION OF LASER POWER SUPPLY (LPS)
WARNING: Disconnect the saw from the power source.
1. Remove the two screws from the miter saw handle with sup-
plied T20 Torx wrench. Save the screws for the assembly of
the Laser Power Supply (LPS) in Step 4. Retain the handle
cover for future use if LPS is removed.
FIG. 1
2. Attach the connections to the LPS.
3. Arrange the wire connection
such that the wide portion of the
connector is placed against the
bottom of the miter saw handle
and fit the LPS to the handle.

Specyfikacje produktu

Marka: DeWalt
Kategoria: Maszyna do piłowania
Model: DW7187

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z DeWalt DW7187, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do piłowania DeWalt

DeWalt

DeWalt DCCS621 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DCPS671 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DCS590 Instrukcja

3 Stycznia 2025
DeWalt

DeWalt DW861 Instrukcja

9 Października 2024
DeWalt

DeWalt DCS397 Instrukcja

7 Października 2024
DeWalt

DeWalt DWE249 Instrukcja

7 Października 2024
DeWalt

DeWalt DWM120 Instrukcja

2 Października 2024
DeWalt

DeWalt DW309K Instrukcja

30 Września 2024
DeWalt

DeWalt DW317 Instrukcja

30 Września 2024
DeWalt

DeWalt DW100 Instrukcja

23 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025
Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Einhell

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025