Instrukcja obsługi CRUX CGM-02S


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla CRUX CGM-02S (2 stron) w kategorii kamera cofania. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
CGM-02S
Tailgate Handle Camera for
CHEVROLET SILVERADO and GMC SIERRA 2007 - 2014
- Replaces the factory tailgate handle and adds a backup camera.
- 170 degree wide view angle for excellent visibility.
- Super CMOS technology provides a sharper picture day and night.
- Maintains the OEM look.
PRODUCT FEATURES:
PARTS INCLUDED:
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
1. Tailgate handle camera
2. 26’ extension cable
3. Plasc hole cover
INSTALLATION INSTRUCTIONS:
1. Start by lowering the tailgate of the truck. Remove the screws that secure the tailgate cover.
2. Aer removing the tailgate cover you will have access to the backside of the factory tailgate handle. Using a
10mm socket, remove the (2) nuts holding the tailgate handle in place. Undo the tailgate latch rods. Li up on
the latch to release the (2) tailgate handle studs and remove the tailgate handle.
3. On the lock cylinder, remove the metal clip that holds the locking mechanism in place. Re-Install the lock cylinder
onto the new tailgate handle.
4. Re-assemble the new tailgate handle into the tailgate in reverse order. Do not put back the tailgate cover unl
aer tesng the camera.
5. Route the Video and Power cables from the tailgate to the boom of the truck. Route the the camera power
wires to the tail light assembly. Tap the RED wire to the +12V reverse light wire and the BLACK wire to ground.
Connue to route the video cable towards the radio and plug in the video RCA to the back of the aermarket
radio of back up camera interface reverse camera input.
6. Test the camera for funconality then put back the tailgate cover.
Tip: There should be an opening (covered by a rubber boot) between the cabin and the bed of the truck where you
can insert the cables into the cabin area. You can run the video cable under the door sill cover.
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.020719
1
CGM-01S
R
INTERFACING SOLUTIONS
Sightline
CAMERAS
Crux Interfacing Solutions • 6860 Canby Ave., Suite 104, Reseda, CA 91335
phone: (818) 609-9299 • fax: (818) 996-8188 • www.cruxinterfacing.com
rev.020719
VEHICLE APPLICATIONS:
2007 - 2014 Silverado
CHEVROLET
2 of 2
WIRING DIAGRAM:
2007 - 2014 Sierra
GMC
Tailgate Handle Camera for
CHEVROLET SILVERADO and GMC SIERRA 2007 - 2014
26 Ft. Coax Cable
To Aftermarket Radio
Backup Camera Input
OR
Reverse Camera Interface
Backup Camera Input +12V (Red)
Ground (Black)
To Reverse Light Wiring


Specyfikacje produktu

Marka: CRUX
Kategoria: kamera cofania
Model: CGM-02S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z CRUX CGM-02S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje kamera cofania CRUX

CRUX

CRUX CMB-17C Instrukcja

29 Grudnia 2024
CRUX

CRUX CMB-16K Instrukcja

29 Grudnia 2024
CRUX

CRUX CMB-16G Instrukcja

29 Grudnia 2024
CRUX

CRUX CMB-15S Instrukcja

29 Grudnia 2024
CRUX

CRUX RVCCH-75WTC Instrukcja

16 Września 2024
CRUX

CRUX CNS-03V Instrukcja

16 Września 2024
CRUX

CRUX CVW-07G Instrukcja

15 Września 2024
CRUX

CRUX RVCCH-75EC Instrukcja

15 Września 2024
CRUX

CRUX CNS-01N Instrukcja

14 Września 2024
CRUX

CRUX CLR-10 Instrukcja

13 Września 2024

Instrukcje kamera cofania

Najnowsze instrukcje dla kamera cofania