Instrukcja obsługi Craftsman CMXGJAMD25PS

Craftsman Maszyna do piłowania CMXGJAMD25PS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Craftsman CMXGJAMD25PS (56 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/56

769-22950 / 00 08/19

ELECTRIC START CAPABLE 2-CYCLE POLE SAW

MOTOSIERRA DE PÉRTIGA DE 2 TIEMPOS CON CAPACIDAD PARA ARRANQUE ELÉCTRICO

OPERATOR’S MANUAL | MANUAL DEL OPERADOR

P210

CMXGJAMD25PS

1-888-331-4569 WWW.CRAFTSMAN.COM

IF YOU HAVE QUESTIONS OR COMMENTS, CONTACT US.

SI TIENE DUDAS O COMENTARIOS, CONTÁCTENOS.

SAFETY

SPARK ARRESTOR NOTE

NOTE: For users on U.S. Forest Land and in the states of

California, Maine, Oregon and Washington. All U.S. Forest Land

and the state of California (Public Resources Codes 4442 and

4443), Oregon and Washington require, by law that certain internal

combustion engines operated on forest brush and/or grass-covered

areas be equipped with a spark arrestor, maintained in effective

working order, or the engine be constructed, equipped and

maintained for the prevention of fire. Check with your state or local

authorities for regulations pertaining to these requirements. Failure

to follow these requirements could subject you to liability or a fine.

This unit is factory equipped with a spark arrestor. If it requires

replacement, contact your local service dealer to install the

appropriate muffler assembly.

Read the operator’s manual and follow all warnings and safety

instructions. Failure to do so can result in serious injury to the

operator and/or bystanders.

SYMBOL MEANING

WARNING: Signals a SERIOUS hazard.

Failure to obey a safety WARNING CAN symbol result in

serious injury to yourself or to others.

CAUTION: Signals a MODERATE hazard.

Failure to obey a safety symbol result in CAUTION MAY

property damage or injury to yourself or to others.

The purpose of safety symbols is to attract your attention to

possible dangers. The safety symbols, and their explanations,

deserve your careful attention and understanding. The safety

warnings do not by themselves eliminate any danger. The

instructions or warnings they give are not substitutes for proper

accident prevention measures.

NOTE: Advises you of information or instructions vital to the

operation or maintenance of the equipment.

DANGER: Signals an EXTREME hazard.

Failure to obey a safety symbol result in DANGER WILL

serious injury or death to yourself or to others.

WARNING: This product can expose you to

chemicals including engine exhaust, which is known to the

State of California to cause cancer, and carbon monoxide,

which is known to the State of California to cause birth

defects or other reproductive harm. For more information

go to www.P65Warnings.ca.gov.

All information, illustrations, and specifications in this manual are based

on the latest product information available at the time of printing. We

reserve the right to make changes at any time without notice.

The product may vary slightly from the illustrations contained in this

manual.

TABLE OF CONTENTS

Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2

Know Your Unit . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9

Essential Terms and Definitions . . . . . . . . . . . . . . . . . . . . . . . . . .10

Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11

Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12

Oil and Fuel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14

Starting and Stopping . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15

Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .17

Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .19

Cleaning and Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .25

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .26

Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27

Service Numbers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Back Cover

• IMPORTANT SAFETY INSTRUCTIONS •

READ ALL INSTRUCTIONS BEFORE OPERATING

• Read the instructions carefully. Be familiar with the controls and

proper use of the unit. Know how to stop the unit and disengage

the controls quickly.

• Stay alert. Do not operate this unit when tired, ill or under the

influence of alcohol, drugs or medication.

• Never allow children to operate the unit. Teens must be trained,

accompanied and supervised by an adult. Never allow adults to

operate the unit without proper instruction.

• All guards and safety attachments must be installed properly

before operating the unit.

• Inspect the unit before use. Check for damaged parts. Check for

fuel leaks. Make sure all parts operate properly. Make sure all

fasteners are in place and secure. Make sure all moving parts are

properly aligned and are not bound. Replace parts that are cracked,

chipped, or damaged in any way. Have all damaged or improperly

working parts repaired or replaced by an authorized service center.

Do not operate the unit with loose or damaged parts.

• Be aware of risk of injury to the head, hands and feet.

• Carefully inspect the area before starting the unit. Remove

rocks, broken glass, nails, wire, string and other objects that

may be thrown or become entangled with the unit.

• Clear the area of children, bystanders and pets; keep them

outside a 50-foot (15 m) radius, at a minimum (Fig. A). Even

then, they are still at risk from thrown objects. Encourage

bystanders to wear eye protection. If you are approached, stop

the unit immediately.

• Squeeze the throttle control and check that it returns

automatically to the idle position. Make all adjustments or

repairs before using the unit.

• Do not change the engine governor settings or overspeed the

engine.

• This unit is intended for occasional, household use only.

WARNING: When using the unit, all safety

instructions must be followed. Please read these

instructions before operating the unit in order to ensure the

safety of the operator and any bystanders. Please keep

these instructions for later use.

SAFETY WARNINGS FOR GAS UNITS

• Store fuel only in containers specifically designed and approved

for the storage of such materials.

• Always stop the engine and allow it to cool before filling the

tank. Never remove the fuel tank cap or add fuel when the

engine is hot. Always loosen the fuel tank cap slowly to relieve

any pressure in the tank before fueling.

• Always mix and add fuel in a clean, well-ventilated outdoor area

where there are no sparks or flames. DO NOT smoke.

• Never operate the unit without the fuel cap securely in place.

• Avoid creating a source of ignition for spilled fuel. Wipe up any

spilled fuel from the unit immediately, before starting the unit.

Move the unit at least 30 ft. (9.1 m) from the fueling source and

site before starting the engine. DO NOT smoke.

• Never start or run the unit inside a closed room or building.

Breathing exhaust fumes can kill. Operate this unit only in a well-

ventilated outdoor area.

WARNING: Gasoline is highly flammable and

its vapors can explode if ignited. Take the following

precautions:

WHILE OPERATING

• Wear safety glasses or goggles that meet current ANSI / ISEA

Z87.1 standards and are marked as such. Wear ear/hearing

protection when operating this unit. Wear a face mask or dust

mask if the operation is dusty. Use a hard hat or other type of

safety helmet. Falling debris can result in serious personal injury.

• Wear safety boots and protective gloves. Wear heavy, snug-

fitting clothes, including long pants and a long-sleeve shirt. Do

not wear loose clothing, jewelry, short pants, sandals or go

barefoot. Secure hair above shoulder level.

• The attachment should remain stationary when the engine is

idling. If it does not, refer to . Adjusting the Idle Speed

• Adjust the handle to provide the best grip, if applicable.

• Use the unit only in daylight or good artificial light.

• Avoid starting the unit unintentionally. Be in the starting position

whenever pulling the starter rope. The operator and unit must be

in a stable position while starting. Refer to Starting and Stopping.

• Use the right tool. Only use this tool for its intended purpose: to

cut wood. Do not use the unit for cutting plastic, masonry or

other non-wood building materials. Only use the unit as

described in this manual.

• Keep hair, face, hands, feet and all other body parts away from

the saw chain when the unit is running. Do not touch or try to

stop moving parts.

• Do not touch the engine or muffler. These parts get extremely

hot from operation, even after the unit is turned off.

• Do not operate the unit faster than the speed needed to do the

job. Do not run the unit at high speed when not in use.

• Do not force the unit, especially near the end of a cut. It will do a

better, safer job when used at the intended rate.

• Always turn the unit off when operation is delayed or when

carrying the unit from one location to another.

• Before setting the unit down, always turn the unit off and wait for

all moving parts to come to a complete stop.

Fig. A

Specyfikacje produktu

Marka:	Craftsman
Kategoria:	Maszyna do piłowania
Model:	CMXGJAMD25PS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Craftsman CMXGJAMD25PS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Craftsman

Craftsman CMCPS630 Instrukcja

9 Stycznia 2025

Craftsman 320.30261 Instrukcja

7 Października 2024

Craftsman CMCCS630 Instrukcja

30 Września 2024

Craftsman CMCCSL621 Instrukcja

5 Września 2024

Craftsman CMCS4000M1 Instrukcja

5 Września 2024

Craftsman CMCS340 Instrukcja

4 Września 2024

Craftsman CMXEMAX69434501 Instrukcja

30 Sierpnia 2024

Craftsman CMCCS320 Instrukcja

29 Sierpnia 2024

Craftsman CMCS350 Instrukcja

26 Sierpnia 2024

Craftsman CMCS351 Instrukcja

26 Sierpnia 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Alpina APR 26 Instrukcja

22 Marca 2025

Gamma HCZ2-85 Instrukcja

11 Marca 2025

Baumr-AG SW1 Instrukcja

10 Marca 2025

Stiga PR 100e Instrukcja

9 Marca 2025

Bosch EasyChain 18V-15-7 Instrukcja

27 Lutego 2025

Worx Nitro WX501 Instrukcja

26 Lutego 2025

DeWalt DCS383 Instrukcja

12 Lutego 2025

EGO PSX2510 Instrukcja

6 Lutego 2025

Hilti WSR 1400-PE Instrukcja

4 Lutego 2025

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025