Instrukcja obsługi Cotech PS002-S


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cotech PS002-S (44 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/44
ENGLISHSVENSK ANORSKSUOMIDEUTSCH
Important!
Read the entire instruction manual carefully
and make sure that you fully understand
it before you use the equipment. Keep the
manual for future reference.
Viktig information:
Läs hela bruksanvisningen noggrant och
försäkra dig om att du har förstått den innan
du använder utrustningen. Spara manualen
för framtida bruk.
Viktig informasjon:
Les disse anvisningene nøye og forsikre deg
om at du forstår dem før du tar produktet i bruk.
Ta vare på anvisningene for seinere bruk.
Tärkeää tietoa:
Lue nämä ohjeet huolellisesti ja varmista
että olet ymmärtänyt ne, ennen kuin alat
käyttää laitetta. Säilytä ohjeet myöhempää
tarvetta varten.
Wichtiger Hinweis:
Vor Inbetriebnahme die komplette
Bedienungsanleitung durchlesen und
aufbewahren.
Art.no Model
18-4377 PS002-S-UK
31-4879 PS002-S
Telescopic Pole Saw
Teleskopisk grensåg
Teleskopisk greinsag
Oksasaha, jossa teleskooppivarsi
Teleskop-Astsäge
Ver. 20130918
Original instructions
Bruksanvisning i original
Original bruksanvisning
Alkuperäinen käyttöohje
Original Bedienungsanleitung
3
ENGLISH
Telescopic Pole Saw
Art.no 18-4377 Model PS002-S-UK
31-4879 PS002-S
Please read theentire instruction manual before using theproduct and save it for future reference.
We reserve theright for any errors in text or images and any necessary changes made to technical data.
If you have any questions regarding technical problems please contact our customer services.
Safety
General safety
1) Work area
a) Keep thework area clean and well illuminated. Cluttered and poorly lit areas invite accidents.
b) Do not use power tools in explosive environments, e.g. near flammable liquids, gases or dust.
Powertoolsgenerate sparks that can easily ignite dust orfumes.
c) Keep children and other bystanders away from thearea where you are using thepower tool.
Distractionscan cause you to lose your concentration and control.
2) Electrical safety
a) The power tool’s plug must fit correctly into thewall socket. Nevermodify theplug in any way. Neveruse
anadaptor together with earthed power tools. Unmodified plugs and suitable wall sockets decrease therisk
of electric shock.
b) Avoid physical contact with earthed objects, such as pipes, radiators, ovens or refrigerators. Thereis
anincreased risk of receiving anelectrical shock if your body is earthed.
c) Do not expose thepower tool to rain or other wet conditions. Ifwater gets inside apower tool it increases
therisk of electric shock.
d) Do not abuse themains lead. Neveruse thelead to carry thetool or pull theplug from thewall socket.
Keepthelead away from heat, oil, sharp edges and moving parts. Damaged or tangled leads increase
therisk of electric shock.
e) When using power tools outdoors, use anextension lead that is suitable for this purpose. Theuse of
anextension lead designed for outdoor use decreases therisk of electric shocks.
f) If for some reason you must use apower tool in awet environment, always connect it to themains via
anearth-fault circuit breaker such as anRCD (residual current device). UsinganRCD significantly reduces
thechances of you receiving anelectric shock.
3) Personal safety
a) This product must not be used by anyone (including children) suffering from physical or mental impairment.
Thisproduct should not be used by anyone that has not read theinstruction manual unless they have been
instructed in its use by someone who will take responsibility for their safety.
b) Pay attention to your actions and use common sense when using power tools. Neveruse power tools if
you are tired or under theinfluence of drugs, alcohol or medication. Onemoment of inattention while using
apower tool may result in serious injury.
c) Use protective equipment. Alwayswear safety glasses. Usingprotective clothing such as dust masks,
non-slip safety shoes, helmets and ear defenders decreases therisk of injury.
d) Avoid accidental starts. Makesure that thepower switch is set to OFF before plugging thetool into awall
socket. Nevercarry apower tool with your finger on thetrigger and never connect thepower tool to awall
socket when theswitch is set to ON, since it may result in injury.
e) Remove all service tools/keys before switching on thepower tool. Aservice tool left on amoving part of
thepower tool may result in injury.
f) Do not overreach. Makesure you stand steady and well balanced at all times. Thisenables you to have
more control in case of unexpected events.
g) Wear suitable attire. Donot wear loose-fitting clothing or jewellery. Keephair, clothes and gloves away from
moving parts. Loose-fitting clothes, jewellery or long hair could become caught in moving parts.
h) If equipment for dust extraction or collection is available, make sure that it is connected and used properly.
Usingtechnical aids may decrease dust related hazards.


Specyfikacje produktu

Marka: Cotech
Kategoria: Maszyna do piłowania
Model: PS002-S

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cotech PS002-S, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Maszyna do piłowania Cotech

Cotech

Cotech PS002-S Instrukcja

29 Sierpnia 2024
Cotech

Cotech LS400 Instrukcja

27 Sierpnia 2024
Cotech

Cotech 92502 Instrukcja

26 Sierpnia 2024
Cotech

Cotech JFB10 Instrukcja

26 Sierpnia 2024
Cotech

Cotech YT4646 Instrukcja

24 Sierpnia 2024
Cotech

Cotech MJ10250IV Instrukcja

22 Sierpnia 2024
Cotech

Cotech M1Q-65D Instrukcja

17 Sierpnia 2024
Cotech

Cotech JS 18 Instrukcja

14 Sierpnia 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Güde

Güde GSS 400 Instrukcja

12 Stycznia 2025
Makita

Makita DUC306PG2 Instrukcja

12 Stycznia 2025
HiKOKI

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025
DEDRA

DEDRA DED7060 Instrukcja

11 Stycznia 2025
Einhell

Einhell KGS 190 Instrukcja

11 Stycznia 2025
Sun Joe

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025
Maruyama

Maruyama MCV51 Instrukcja

11 Stycznia 2025
Vonroc

Vonroc JS505DC Instrukcja

9 Stycznia 2025