Instrukcja obsługi Coral Box QPS-16

Coral Box Pompa wodna QPS-16

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Coral Box QPS-16 (7 stron) w kategorii Pompa wodna. Ta instrukcja była pomocna dla 11 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/7
Wireless Controller for Quiet Pump Plus
User’s Manual
CoralBox wave makers are specifically engineered as the perfect equipment to simulate the natural sea
environments.
Quiet pump is a very compact propeller pump using innovation and high technology solutions to provide
natural environments for different sea inhabitants in aquariums,fish tanks or in ponds. The excellent
design,including the compact housing and the magnet holder,permits 3D flow directions and simple mounting
at every point of aquarium walls.
Before assembling and operating correctly, please read the user manual carefully.
Models: QP-5 plus/QP-9 plus/QP-16 plus
Ⅰ. Function Overview
1. Unique control system allows to operate with different types of wave and multiple functions,which can
generate different wave patterns according to different needs.
2. Wireless controllers allow to synchronize operation among wave makers.One main controller can
remotely control several sub-controllers.
3. Low voltage DC electronic pump with variable frequency provides a safe environment for users.
4. Easy operation to achieve the multiple sea moving patterns.
5. Flow direction can be adjusted by different operative modes,as needed.
6. Input voltage of 100~240v allows for seamless operation in many regions of the world.
Ⅱ.Assembly and installation Notes
Suitable for most sizes of aquarium and ponds,up to 15mm glass wall thickness.
Caution!Danger of injury!Pay attention to your fingers when locating the magnet due to the strong attractive
power.
1. Separate the external magnet from the pump package. Locate the pump in the selected position inside
the tank on the internal side of the glass wall. Locate the external magnet on the external side of the same
glass wall and slide it up to the pump position. Ensure that the aquarium glass is free form algae inside and is
dry and clean outside.
2. If the controller has to be stuck on the tank, peel-off the protection paper from one side of the double
sided tape and past it on the back side of the controller. Peel-off the second protection paper and locate the
controller in the selected position.
3. Connect the pump to the controller by means of the 3-pins connector. Insert the adapter plug to the
controller and connect the power unit to the power supply source.
4. Start controller programming.
Ⅲ.Operation and Function
3.1 Buttons and Functions of LED Display Controller
Mode/Night :Press the button to select different
modes:F1,F2,F3,F4,F5,F6 F7and enter to the Night mode
by long hold-down the button.
Freq/reverse :Press the button to change the
Frequency and long hold the button to change to Reverse
mode.
WI-LE/Reset : Press the button to select Master
control”M”,"S" for Slave,”N” for Standalone.unit Hold down
the Reset key for 3 sec. to reset the controller unit.
Arrow keys :10Mins Feed / 20Mins Feed
or move position.
*Attention:If the pump operates in Night Mode,any other mode/feeding is disabled until exit from the Night
Mode
Be careful: Make sure switch off main switch of controller before plug controller with DC power supply or plug
controller with powerhead block.
3.2Technical data
3.3 Introduction of each mode
F1:Stream Mode
One or more pumps can
operate at the same time,
in constant flow.
Press to change
frequency
Press to change
flow
F2:Pulse Mode
One or more pumps can
operate at the same
time,in pulse flow.
Pulse the wave by time /
flow frequency.
Nature Mode(LPS)
Reef Mode(SPS)
Press to change
frequency
Press to change
flow
F3:Asynchronous
Wave Mode
Shift flow in cycles,
Pump A run, Pump B
stop;Pump B run, Pump
A stop
Need have 2 Pump with
WIFI master and slave to
run
Press to change
frequency
Press to change
flow
F4:Nature Mode
The power level
changes between
30%~100% making a
more natural flow
pattern.
Press to change
frequency
Press to
change flow
QP-5 plus
QP-16 plus
Flow
5000L
(1300gal/h)
16000L
(4160gal/h)
Watts
10W
40W
Size
85*60*65mm
(3.3*2.7*2.6inch)
125*90*85mm
(4.9*3.5*3.3inch)
F5:Reef Mode
Power of flow is changing
in a random mode in
volume and time. This is
the best mode for corals.
Press to change
frequency
Press to change
flow
F6:Timer Mode
Six different operative
modes can be set in this
mode. For example, the
first set of 9 a.m to 10
a.m stream mode, the
second set of 10 a.m to 1
p.m pulse mode.
F0: Stop Mode
Only work with timer
mode. This mode Stops
the Pump running in the
programmed time slot.
F7: Reverse Mode
Clockwise pump.The
pump uses the opposite
direction of the water
flow to improve cleaning
of your tank.
Press to change
frequency
Press to
change flow
*How to Set the Timer?
First you need to change Function to the F6: Timer mode
Press to switch timer program and input, press to move position.Press to adjusted the Real
Time/Schedule/Timer/Mode.
Example for our timer:
Schedule
Timer ( Start ~ End )
Mode
T1
09:00 Start ~ 11:00 End
F1
T2
11:00 Start ~ 13:00 End
F2
T3
13:00 Start ~ 15:00 End
F3
T4
15:00 Start ~ 17:00 End
F4
T5
17:00 Start ~ 22:00 End
F5
T6
22:00 Start ~ 09:00 End
F1
Ⅳ.Warnings
●Do not allow the pump to run dry.
●Select a dry location for the controller where it will not be splashed with water.
●Pay attention during magnets assembly. It is recommended to locate the magnetic pad close to the
outside wall of fish tank to prevent breaking the fish tank and then shift it in correspondence of the pump
location.
●Never disassemble the controller and the adaptor without professional guidance.
●Never repair a damaged cable without professional guidance. In case of main cable damage, change
the entire pump or power supply unit.
Ⅴ. Maintenance & FAQ
1.Why can't I change the mode?
Check if night mode is on, if it is set it to off. If Wireless is "S", the pump is controlled by the master pump,
change the wireless mode to N (Standalone)to allow for local settings.
Check the Timer if you change back to F6 Mode,after set the timer,you need to switch F6 to running.Make
sure all the timer program T1-T6 is set, remember check it not overlap corrupt on the same time.Otherwise it
will not function.
2.How Can I reset the controller?
Hold the Reset button 3 seconds, it will reset the controller programs to the factory status.
3.How many time periods can I program on each day?
Up to 6 time periods per days.
4.Why can’t i use F0 mode?
F0 Mode(Stop the pump),The function only works in Timer mode.
5.Why won’t my program run?
Check the timer, if you change back to F6 mode after you set the timer,you need to switch F6 to running.
6.My pump produces some noise.What can I do?
New pumps could have temporary sound issue. Normally the noise will be naturally reduced after one week of
operation. You can also try to take-out the impeller and reinstall the rubber bush.
7.How I can set for the Master and Slave Pump?
Set WIFI Button to “M” for A Pump,and set B Pump controller WIFI to “S”.
8.Which parts are consumables?
THE IMPELLER / THE RUBBER BUSH AND THE COVER ARE CONSUMABLE ITEM, WE RECOMMEND
TO CHECK REGULARLY THEIR STATUS AND TO CHANGE THEM AFTER TO PROVIDES BEST1 YEAR
PERFORMANCES.
ITEM
CODE
Impeller
81001
Rubber Bush
81002
Cover
81003
Package Content
Coral Box wave maker pump
Wireless controller with connection cable
Power unit with power cable
Bi-adhesive
User manual
●This product is for indoor use only. Never submerge the controller, the power supply unit or the connect
or inside the water to avoid unnecessary loss.
●Regularly clean the controller to ensure good performance.
●Rub the controller surface with a dry cloth if it has been accidentally wetted to prevent water from
dripping into controller.
●Sweep the waste in the pump housing and on the propeller by opening the pump housing. Rotate the
basket in anti-clockwise direction to open the housing and lock it by rotating in clockwise direction.
●Use soft cloth to rub the blade and clean the dirt in the pump
Ⅶ.WEEE
EU Waste Electrical and Electronic Equipment (WEEE) Directive In August of 2005, the European Union(EU)
implemented the EU WEEE Directive 2002/96/EC and later the WEEE Recast Directive 2012/191EU requiring
Producers of electronic and electrical equipment(EEE) to manage and finance the collection,reuse,recycling
and to appropriately treat WEEE that the Producer places on the EU market after August 13,2005.
The goal of this directive is to minimize the volume of electrical and electronic waste disposal and to
encourage re-use and recycling at the end of life. Coral Box has met its national obligations to the EU WEEE
Directive by registering in those countries to which Coral Box is an importer.
Coral Box has also elected to join WEEE Compliance Schemes in some countries to help manage customer
returns at end-of-life.If you have purchased Coral Box-branded electrical or electronic products in the EU and
are intending to discard these products at the end of their useful life,please do no dispose of them with your
other household or municipal waste. Coral Box has labeled its branded electronic products with the WEEE
Symbol.(figure 1)to alert our customers that products bearing this label should not be disposed of in a landfill
or with municipal or household waste in the EU.
Instead,please be aware that Coral Box is making a return and collection system available to you,free of
transportation and recycling costs,for discarding these products.Can only be used by the Company if this
document is publicly available.For a copy of Coral Box’s Selective Treatment of Waste Electrical and
Equipment outlined under Articles 14 and 15 and Annex VII of the EU WEEE Directive 2012/19/EU,please
click here WEEE Selective Treatment List and the list of hazardous materials used in our product.

Specyfikacje produktu

Marka: Coral Box
Kategoria: Pompa wodna
Model: QPS-16

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Coral Box QPS-16, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Pompa wodna Coral Box

Coral Box

Coral Box QPS-16 Instrukcja

5 Lipca 2024

Instrukcje Pompa wodna

Najnowsze instrukcje dla Pompa wodna

Dimplex

Dimplex WI 22 TE Instrukcja

11 Października 2024
DAB

DAB FEKA Instrukcja

9 Października 2024
Einhell

Einhell BG-DP 3730 Instrukcja

9 Października 2024
Einhell

Einhell Royal RHW 1000 Niro Instrukcja

9 Października 2024
Einhell

Einhell Royal HW 811 Instrukcja

9 Października 2024
Einhell

Einhell Royal GP-F 1300 Niro Instrukcja

9 Października 2024
Hayward

Hayward S240SLETL Instrukcja

9 Października 2024
Anova

Anova BE1450ASC Instrukcja

8 Października 2024
Anova

Anova BA2C10 Instrukcja

8 Października 2024
Einhell

Einhell RG-GP 1139 Instrukcja

8 Października 2024