Instrukcja obsługi COLBOR CL100-M

COLBOR Ulga CL100-M

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla COLBOR CL100-M (2 stron) w kategorii Ulga. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/2
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
SET RATE EFF CCT
POWER
CL100-M Video Light User Manual
Thank you for choosing COLBOR product. Please read this manual
carefully before use and follow all instructions mentioned herein.
Caring For Your COLBOR Product
Keep corrosive chemicals, liquids and heat source away from the product to
prevent mechanics damage.
The product is not waterproof.
Do not leave the product unattended while in use. Keep out of reach of
children.
Must remove the COB protective cover before use.
Do not handle with wet hands. Do not touch hot COB surface.
Please do not block the ventilation and do not look at the light directly when
it is on.
Do not attempt to disassemble or modify the product. Doing so voids
warranty.
Please have the product checked or repaired by authorized technicians if any
malfunctions happened.
Disconnect from the power supply when it is not in use.
Malfunction may be caused by dropping, impact of external force.
Failure to follow all the instructions may result in mechanics damage.
Warranty does not apply to human errors.
Product Instructions
① Bowens Mount Release Latch
② LED Display Screen
③ Settings Button
④ EFF Rate Option Button
⑤ Adjustment Dial
⑥ EFF Mode Button
⑦ CCT Mode / Power Button
⑧ Power Input
⑨ Umbrella Lock
⑩ Umbrella Input
⑪ Light Base Lock
⑫ Light Base
⑬ Direction Adjusting Handle
Operation Instructions
After selecting wireless connection in Settings menu, the
icon will be displayed dynamically.
The icon is always on to indicate successful pairing with
mobile APP.
The icon disappears to indicate mobile APP pairing
failure, or the product is unpaired.
Smart Mode. The product will adjust the fan speed
according to the internal detected temperature to ensure
that it is in optimal working condition.
Status Icon Description
1. Connect the power cord with the power adapter, plug the connector of
adapter into the xture’s Power Input
2. Plug it into an electricity supply
3. Long press the Power Button to turn on the light. Default Mode: CCT
4. Long press the Power Button to turn o the light.
① APP Connection Status Icon
② Fan Status Icon
Quiet Mode. The fan keeps running at low speed for
minimum noise, and overheating protection will be
activated if the product temperature is higher than the
alarm value.
None grouping status. The product defaults to the factory
status, and will not be aected by other groups.
If the icon is always on, it means that Repeater function
is turned on, and if the icon disappears, it means the
function is turned o.
If the icon ashes, it means that the internal temperature
of the product is too high, and cooling measures need
to be taken. If the icon disappears, it means that the
operation is normal.
③ Group Status Icon
④ Repeater Status Icon
⑤ Product Overheated Alarm Icon
A stands for Group A. There are six groups (A~F). T
stands for Tx.
A stands for Group A. There are six groups (A~F). R
stands for Rx.
A stands for Group A. There are six groups (A~F). TR
stands for TxRx.
Brightness (0%-100%)
CCT Mode (Short press CCT Mode Button to enter)
Brightness Control:
Interface Introduction
Roll the Dial clockwise to increase value, and anticlockwise to decrease value.
Rolling the Dial will enlarge the current setting parameter value, and it will
automatically return to the main screen after 1.5 seconds of no operation
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
Pulsing
Explosion
Strobe
Lightning
EFF
Rate
BrightnessSpecial Eect
Color Temperature
EFF Mode (Short press EFF Mode Button to enter)
Special Eect Switch: Short press EFF Mode Button
Interface Introduction
1. Roll the Dial clockwise to increase value, and anticlockwise to decrease
value.
2. Short press EFF Rate Option Button to choose eect rate.
Brightness / Rate Control:
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: Lv.1 - Lv.5
DIM: 0%-100%
CCT: 5600K
RATE: LOCK
DIM: 0%-100%
CCT: 5600K
Faulty Bulb
Welding
SOS
EFF
CURVE
RESP.
LANG.
LINEAR
SHARP
EN
COMM.
RP
CURVE
RX
ON
LINEAR
BT
FAN
GROUP
RESET
SMART
A
WARRANTY
Warranty Period
Thank you for purchasing COLBOR products.
1. Customers are entitled to free replacement or repair service in case of
quality defect(s) found in the product under normal use within 30 days upon
receipt of the product.
2. Original COLBOR products are entitled to 12-month limited warranty service.
The warranty period begins on the date of purchase of brand new, unused
products by the rst end-user.
Within the warranty period, if product defect or failure is attributable to material
defection or technological problem, the defective product or defective part will
be repaired or replaced without charge (service and materials fee).
Warranty Exclusions and Limitations
1. Faults resulted from inappropriate use of a product without following its
operation specication
2. Articial damage, e.g. crash, squeeze, scratch, soaking, exposing to rain or
damp
3. Modications to a product by its user or a third party without prior written
consent of COLBOR, e.g. replacement of element or circuit, label alteration
4. The code on product is inconsistent with that of warranty certicate, or the
WARRANTY CERTIFICATE
USER
INFORMATION
SALES
INFORMATION
REPAIR RECORD
RESULT
Please register your warranty. Meanwhile, you are welcomed to contact us via Email.
Customer Name:
Phone Number:
Email:
Address:
Service Date:
Technician:
Issue:
Sales Date:
Model:
Product Code:
Dealer:
Solved Unsolved Returned(Replaced)
Block 15th, No.200 Fangcun Avenue East, Liwan District, Guangzhou, China, 510000
support@colborlight.com
www.colborlight.com
Guangzhou Zhiying Technology Co., Ltd
code on the product or warranty certicate is altered or torn o
5. All consumable accessory attached to a product, like cable, cover
6. Faults as a result of force majeure, such as re, ood, lightning, etc.
Warranty Claim Procedure
1. If failure or any problem occurs to your product after purchase, please
contact a local agent for assistance, or you can always contact COLBOR’s
customer service through email.
2. Please retain your sales receipt and warranty certicate as proof of
purchase. If any of these documents is missing, only sales return or chargeable
service will be provided.
3. If the COLBOR product is out of the warranty coverage, the service and the
parts cost will be charged.
Settings
1. Short press Settings Button to control the following settings
2. Scroll down the list by rolling Adjustment Dial clockwise, or rolling
anticlockwise to scroll up.
3. Short press the Dial to enter corresponding setting.
Fan Mode
Wireless Connection
Communication
Settings Options
SMART/ QUIET
(SMART—The product will detect
the current internal temperature to
adjust the fan speed by itself.
QUIET—The fan will run at low
speed. If the product temperature
reaches the alarm value, it will
start the power-o protection
mechanism. )
RESET
TX/ RX/ TXRX (TX by default)
Group NULL/ A/ B/ C/ D/ E/ F (NULL
by default)
Repeater
Response
Language
ON/ OFF (OFF by default)
SHARP / SMOOTH (SMOOTH by
default)
EN/ CN (EN by default)
Curve
LINEAR (L.CURVE, E.CURVE,
S.CURVE will be available soon
through upgrade.)
When Group function is on, if the product is operated after a period
of time, it takes time to connect between products, so there will be
millisecond delay.
The eective distance of transmitter (TX), receiver (RX), transmitter &
receiver (TXRX) is 10 meters. If the product is used at a distance greater
Specications
Color Rendering Index
Color Temperature Range
Beam Angle
Illumination
Power
Light Working Voltage
Cooling Mode
Connector
Body Material
Light Dimension (mm)
Light Weight
Operating Temperature
≥ 97
5600K
≈∠ 120° (With Standard Reector 55° )
4130Lux (at 3.28ft / 1m 5600K, None Reector);
14546Lux (at 3.28ft / 1m 5600K, With Standard Reector)
100W (Constant Power)
DC 15-24V 6.32A
Active
GX16 3-Pin Connector
ABS
202x116x117 (Light Base Not Included)
1.1kg/39oz
-10-50℃
than 10 meters, it is recommended to use the Repeater (RP) function.
Repeater (RP) function can eectively increase the control distance, but it
will aect the product response time.
It is recommended to set only one product within 10 meters diameter to
turn on the Repeater (RP) function, the more you turn on, the slower the
response during group control.
Package List
CL100-M Video
Light x1
Standard Reector (With
Bowens Mount) x1
COB Protective
Cover x1
Power Adapter x1 Power Cord x1
Packing Bag
x1
User Manual
x1

Specyfikacje produktu

Marka: COLBOR
Kategoria: Ulga
Model: CL100-M

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z COLBOR CL100-M, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Ulga COLBOR

COLBOR

COLBOR BP45 Instrukcja

16 Grudnia 2024
COLBOR

COLBOR W100R Instrukcja

16 Grudnia 2024
COLBOR

COLBOR BP65 Instrukcja

16 Grudnia 2024
COLBOR

COLBOR AT670 Instrukcja

16 Grudnia 2024
COLBOR

COLBOR CL100 Instrukcja

16 Grudnia 2024
COLBOR

COLBOR CL600 Instrukcja

16 Grudnia 2024
COLBOR

COLBOR ModuFrame SE Instrukcja

16 Grudnia 2024
COLBOR

COLBOR BP90 Instrukcja

16 Grudnia 2024
COLBOR

COLBOR CL100-M Instrukcja

16 Grudnia 2024
COLBOR

COLBOR CL120R Instrukcja

16 Grudnia 2024

Instrukcje Ulga

Najnowsze instrukcje dla Ulga

Sharper Image

Sharper Image Solar Powered Address Sign Instrukcja

18 Grudnia 2024
Wiesenfield

Wiesenfield UNI-LP-100 Instrukcja

18 Grudnia 2024
American DJ

American DJ ENCORE LP12IP Instrukcja

18 Grudnia 2024
American DJ

American DJ ENCORE LB15IP Instrukcja

18 Grudnia 2024
Nedis

Nedis WIFILC10WTGU10 Instrukcja

17 Grudnia 2024
Sea&Sea

Sea&Sea YS-D3 Instrukcja

17 Grudnia 2024
Cateye

Cateye Loop SL-LD110 Instrukcja

17 Grudnia 2024
Cateye

Cateye Loop 2 SL-LD140RC-R Instrukcja

17 Grudnia 2024
Cateye

Cateye Blitz Auto TL-AU330G Instrukcja

17 Grudnia 2024
Ledlenser

Ledlenser iF4R Instrukcja

17 Grudnia 2024