Instrukcja obsługi Citronic U-Pad 170.876UK

Citronic Konsola miksująca U-Pad 170.876UK

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Citronic U-Pad 170.876UK (9 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/9
CSD-series
Compact Mixers with and DSP B/T
Item ref: 170.875 UK
170.876 UK
170.877 UK
User Manual
Version 1.1
Caution: Please read this manual carefully before operating
Damage caused by misuse is not covered by the warranty
CSD-series Mixers User Manual
Introduction
Thank you for choosing a Citronic CSD-series mixer as part of your professional sound system. This
product has been developed to provide a wide range of facilities for professional and reliable sound
reinforcement. Please read and keep this manual to achieve the best results from your purchase and avoid
damage through misuse.
SAFETY SYMBOL AND MESSAGE CONVENTIONS
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
AVIS
RISQUE DE CHOC
ELECTRIQUE NE PAS
OUVRIR
This symbol indicates that dangerous voltage constituting a risk of
electric shock is present within this unit
This symbol indicates that there are important operating and
maintenance instructions in the literature accompanying this unit.
Warning
To prevent the risk of fire or electric shock, do not expose any components to rain or moisture. If liquids
enter the housing, stop using immediately, allow the unit to dry out and have checked by qualified it
personnel before further use. Avoid impact, extreme pressure or heavy vibration to the case.
No user serviceable parts inside Do not open the case refer all servicing to qualified service personnel. – –
Safety
• Use the 5Vdc power adaptor supplied or equivalent.
• Avoid ingress of water or particles into any part of the housing. If liquids are spilled on
the console, stop using immediately, allow the unit to dry out and have checked by
qualified personnel before further use
Placement
• Keep the console out of direct sunlight and away from heat sources.
• Do not place heavy objects on top of the control surface
• Allow adequate space for airflow and keep the console away from damp or dust .
Cleaning
• Use a soft cloth with a neutral detergent to clean the housing as required.
• A soft brush can be used to clear debris from between controls without damaging them
• Do not use solvents for cleaning the unit.
CSD-series Mixers User Manual
Console layout
Each CSD compact mixing console has a bank of mono input channels which can accept a balanced
microphone input or switchable line/instrument input. There is also a stereo input for playback devices or
line level instruments.
All preamps have studio grade, low noise architecture for the cleanest possible path throughout the signal
chain. Console layout is set out in distinct sections to simplify opera tion.
The following pages of this manual are divided up into these stages to explain the details and function of
each control.
Channel inputs
Channel inputs are provided as XLR or 6.3mm jack on combo sockets.
If an XLR is plugged in, this will be con cted as low impedance (microphone) level. If a 6.3mm plug is ne
used, this will be connected as either line or instrument level (switchable)
The connections for these inputs are assigned as follows.
Mic / Line / Instrument input
1. Combo input Connect a balanced microphone via XLR connection or a line level or
instrument input via 6.3mm plug. An unbalanced XLR can be connected provided that
+48V phantom power is not used. Wired as follows.
Balanced
Pin 1 = Ground
Pin 2 = Signal +
Pin 3 = Signal –
Unbalanced
Pin 1 = Ground
Pin 2 = Signal +
Pin 3 = Ground
2. IMPED switch Press this button in to set the input impedance to instrument level or leave the button in
the up position for a line level input. (instrument level is usually for pickups, such
as those on a guitar. Electronic keyboards usually produce a line level output)
3. +48V phantom Press this button in to enable +48V phantom power to the XLR and the LED indicator
will light. This provides power to some condenser microphones and DI boxes.
Do not use with unbalanced XLR connectors. This does not affect any jack inputs.

Specyfikacje produktu

Marka: Citronic
Kategoria: Konsola miksująca
Model: U-Pad 170.876UK

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Citronic U-Pad 170.876UK, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Konsola miksująca Citronic

Citronic

Citronic U-Pad 170.876UK Instrukcja

22 Września 2024
Citronic

Citronic PRO-2 MKII Instrukcja

21 Września 2024
Citronic

Citronic CDM8:4 mkV Instrukcja

21 Września 2024
Citronic

Citronic CDM10:4 mk5 Instrukcja

21 Września 2024
Citronic

Citronic CM4-STUDIO Instrukcja

21 Września 2024
Citronic

Citronic CSM-6 Instrukcja

20 Września 2024
Citronic

Citronic CM10-LIVE Instrukcja

20 Września 2024
Citronic

Citronic Z5M Instrukcja

20 Września 2024
Citronic

Citronic CSM-8 Instrukcja

20 Września 2024
Citronic

Citronic CSM-4 Instrukcja

18 Września 2024

Instrukcje Konsola miksująca

Najnowsze instrukcje dla Konsola miksująca

Behringer

Behringer XENYX QX2442USB Instrukcja

14 Października 2024
Koenic

Koenic KHB 800 Instrukcja

14 Października 2024
Ibiza Sound

Ibiza Sound MX801 Instrukcja

14 Października 2024
Pyle Pro

Pyle Pro PMXU83BT Instrukcja

12 Października 2024
Vonyx

Vonyx VMA106 Instrukcja

9 Października 2024
Røde

Røde RØDECaster Duo Instrukcja

8 Października 2024
Valcom

Valcom V-9985 Instrukcja

8 Października 2024
Valcom

Valcom V-9983 Instrukcja

8 Października 2024
Valcom

Valcom V-9984 Instrukcja

8 Października 2024
Glemm

Glemm MX 4816 Instrukcja

8 Października 2024