Instrukcja obsługi Cisco WAP371

Cisco router WAP371

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cisco WAP371 (14 stron) w kategorii router. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/14
Quick Start Guide
390634
Cisco WAP371 Wireless Access Point
1 Cisco WAP371 Wireless Access Point
Welcome
Thank you for choosing the Cisco WAP371 Wireless Access Point. The
Cisco WAP371 is an indoor dual radio 802.11ac + 802.11n access point.
This guide is designed to familiarize you with the general layout of the
access point, describe how to deploy the device in your network, and
describe how to configure the device. Your access point has more features
and functionality than what is described in this guide. For additional
information, see the Administration Guide. A link to the Administration
Guide is found in Where to Go From Here, page 11.
Package Contents
Wireless Access Point
Mounting kit
This Quick Start Guide
Ethernet cable
Pointer Card with China RoHS
Technical Support Contacts
EU Directives 1999/5/EC Compliance Information (for EU SKU only)
Before You Begin
Before you begin the installation, make sure that you have the following
equipment and services:
A computer with browser support for:
Internet Explorer v7.0 or later
Chrome v5.0 or later
Firefox v3.0 or later
Safari v3.0 or later
Tools for installing the hardware
One or more Ethernet network switches with PoE
1
Cisco WAP371 Wireless Access Point 2
Cisco WAP371 Wireless-AC/N Dual Radio
Access Point with Single Point Setup
Features
Front Panel
The front panel of the device consists of three lights: Power, WLAN, and
LAN. For full descriptions of the colors of the lights and their indications,
see Verifying the Hardware Installation, page 6.
A Kensington lock slot is found under the lights.
Back Panel
The back panel of the device has an RJ-45 Ethernet port. Use the Ethernet
port to power your device using PoE. It is an auto-sensing, Gigabit
Ethernet (802.3) port used to connect your WAP devices to network
devices, such as computers, routers, or switches. We strongly
recommend that you use a Category 5e or better cable for gigabit
connectivity.
The 12V DC jack is used to connect the supplied power adapter to the
Cisco WAP371 if you are not using PoE.
The back panel of the device has a Reset button. See Rebooting the
Devices or Returning them to their Factory Default Settings, page 10
for information on the Reset button.
Default SettingHAF1H39Cs
If you are using a Cisco RV Series router, the default range for the DHCP
assigned address is from 192.168.1.100 to 192.168.1.254. Any device
connecting to the same LAN will be assigned an IP address in this range.
Parameter Default Value
Username cisco
Password cisco
LAN IP Address DHCP address assigned
by server
Fallback LAN IP 192.168.1.245
Subnetwork Mask 255.255.255.0
2

Specyfikacje produktu

Marka: Cisco
Kategoria: router
Model: WAP371

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cisco WAP371, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Cisco

Cisco

Cisco WES610N Instrukcja

5 Września 2024
Cisco

Cisco 7204VXR Instrukcja

5 Września 2024
Cisco

Cisco WRVS4400n Instrukcja

21 Sierpnia 2024
Cisco

Cisco E900 Instrukcja

18 Sierpnia 2024
Cisco

Cisco UC540 Instrukcja

15 Sierpnia 2024
Cisco

Cisco C841M-4X Instrukcja

15 Sierpnia 2024
Cisco

Cisco 2801 Instrukcja

13 Sierpnia 2024
Cisco

Cisco C926-4P Instrukcja

9 Sierpnia 2024
Cisco

Cisco WAP371 Instrukcja

8 Sierpnia 2024

Instrukcje router

Najnowsze instrukcje dla router