Instrukcja obsługi Cisco UC540

Cisco router UC540

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cisco UC540 (86 stron) w kategorii router. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/86
Americas Headquarters:
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Regulatory Compliance and Safety Information
for the Cisco Unified Communications 500 Series
Model UC 540 for Small Business
This document provides domestic and international regulatory compliance and safety information for the
Cisco Unified Communications 500 Series Model UC 540 for Small Business. Read this document
before installing or servicing your product.
Warning
IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar
with standard practices for preventing accidents. Use the statement number provided at the end of
each warning to locate its translation in the translated safety warnings that accompanied this device.
Statement 1071
SAVE THESE INSTRUCTIONS
This document contains the following sections:
Safety
Electromagnetic Compatibility
Telecom Approvals Listing
Declaration of Conformity Statements
California Perchlorate Contamination Prevention ActTitle 22, California Code of Regulations,
Chapter 33
Translated Safety Warnings
2
Regulatory Compliance and Safety Information for the Cisco Unified Communications 500 Series Model UC 540 for Small Business
OL-20658-01
Safety
Note Package names, bundles, and ordering numbers for different configurations of the UC 540, with selected
interface cards or services, are indicated by changing the last digit of the marketing designation within
the range of 0 to 9. These changed numbers do not affect the model name, and they do not appear on the
bottom homologation label with the approvals. The basic approved chassis of the UC 540 is not changed
or modified in any way.
Safety
This section describes safety conditions and operating conditions for the UC 540. It contains the
following:
Agency Approvals and Standards
Restricted Area
Operating Conditions for Canada
Operating Conditions for Australia and the European Community
Operating Conditions for the United Kingdom
Warning
This equipment will be inoperable when mains power fails.
Statement 198
Warning
High leakage currentpermanent earth connection essential before making Telecommunication
Network Connection.
Statement 343
Warning
To avoid electric shock, do not connect safety extra-low voltage (SELV) circuits to telephone-network
voltage (TNV) circuits. LAN ports contain SELV circuits, and WAN ports contain TNV circuits. Some
LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables.
Statement 1021
Warning
Never touch uninsulated telephone wires or terminals unless the telephone line has been
disconnected at the network interface.
Statement 1037
Warning
Avoid using a telephone (other than a cordless type) during an electrical storm. There may be a remote
risk of electric shock from lightning.
Statement 1038
Warning
For connections outside the building where the equipment is installed, the following ports must be
connected through an approved network termination unit with integral circuit protection.
10/100/1000 Ethernet
Statement 1044
3
Regulatory Compliance and Safety Information for the Cisco Unified Communications 500 Series Model UC 540 for Small Business
OL-20658-01
Safety
Warning
Voltages that present a shock hazard may exist on Power over Ethernet (PoE) circuits if
interconnections are made using uninsulated exposed metal contacts, conductors, or terminals.
Avoid using such interconnection methods, unless the exposed metal parts are located within a
restricted access location and users and service people who are authorized within the restricted
access location are made aware of the hazard. A restricted access area can be accessed only
through the use of a special tool, lock and key or other means of security.
Statement 1072
Warning
No user-serviceable parts inside. Do not open.
Statement 1073
Agency Approvals and Standards
This section lists the following agency approvals and standards for safety:
CSA Certified to Information Technology Equipment Safety Part 1: General Requirements, CSA
CAN/CSA-C22.2 No. 60950-1-03, and UL 60950-1
Self-certified compliant to Australian Standard AS/NZS 60950.1:2003
CSA CB certificate/Test Report to EN and IEC 60950-1 with all country deviations and national
deviations
Restricted Area
The following warning is applicable only in Scandinavian countries.
Warning
This unit is intended for installation in restricted access areas. A restricted access area can be
accessed only through the use of a special tool, lock and key, or other means of security.
Statement 1017
Operating Conditions for Canada
In addition to the warnings and safety guidelines listed in the Translated Safety Warnings section on
page 13 in this document, the following operating conditions apply to the UC 540 used in Canada:
The Canadian Department of Communications label identifies certified equipment. This
certification means that the equipment meets certain telecommunications network protective
operational and safety requirements. The Department does not guarantee that the equipment will
operate to the users satisfaction.
Before installing the equipment, users should ensure that it is permissible to connect the equipment
to the facilities of the local telecommunications company. The equipment must also be installed
using an acceptable method of connection. In some cases, the companys inside wiring associated
with a single-line individual service may be extended by means of a certified connector assembly
(telephone extension cord). The customer should be aware that compliance with the above
conditions may not prevent degradation of service in some situations.

Specyfikacje produktu

Marka: Cisco
Kategoria: router
Model: UC540

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cisco UC540, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje router Cisco

Cisco

Cisco WES610N Instrukcja

5 Września 2024
Cisco

Cisco 7204VXR Instrukcja

5 Września 2024
Cisco

Cisco WRVS4400n Instrukcja

21 Sierpnia 2024
Cisco

Cisco E900 Instrukcja

18 Sierpnia 2024
Cisco

Cisco UC540 Instrukcja

15 Sierpnia 2024
Cisco

Cisco C841M-4X Instrukcja

15 Sierpnia 2024
Cisco

Cisco 2801 Instrukcja

13 Sierpnia 2024
Cisco

Cisco C926-4P Instrukcja

9 Sierpnia 2024
Cisco

Cisco WAP371 Instrukcja

8 Sierpnia 2024

Instrukcje router

Najnowsze instrukcje dla router