Instrukcja obsługi Cisco SPA-1X10GE-L-V2-RF

Cisco Karta sieciowa/adapter SPA-1X10GE-L-V2-RF

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Cisco SPA-1X10GE-L-V2-RF (13 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/13
Data Sheet
© 2009–2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 1 of 5
Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter, Version 2
The Cisco® Interface Flexibility (I-Flex) design combines shared port adapters (SPAs) and SPA interface
processors (SIPs), taking advantage of an extensible design that facilitates service prioritization for voice,
video, and data services. Enterprise and service provider customers can take advantage of improved slot
economics resulting from modular port adapters that are interchangeable across Cisco Systems® routing
platforms. The Cisco I-Flex design maximizes connectivity options and offers superior service intelligence
through programmable interface processors that deliver line-rate performance. Cisco I-Flex enhances
speed-to-service revenue and provides a rich set of quality-of-service (QoS) features for premium service
delivery while effectively reducing the overall cost of ownership. This data sheet contains the
specifications for the Cisco 1-Port 10 Gigabit Ethernet Shared Port Adapter, Version 2 (Cisco 1-Port 10-
GE SPA; Figure 1 shows a SIP with 10 Gigabit Small Form-Factor Pluggable [XFP] optics).
Figure 1. Cisco 1-Port 10-GE SPA with XFP Optics
Product Overview
The Cisco 1-Port 10-GE SPA is available on high-end Cisco routing platforms, offering the benefits of network
scalability with lower initial costs and ease of upgrades. The Cisco SPA/SIP portfolio continues the company's focus
on investment protection along with consistent feature support, broad interface availability, and the latest technology.
The Cisco SPA/SIP portfolio allows deployment of different interfaces (packet over SONET/SDH [POS], ATM,
Ethernet, etc.) on the same interface processor.
Within a central office or data center or in a metropolitan-area network (MAN), 10 Gigabit Ethernet interfaces are
commonly used to interconnect routers or other devices. The Cisco 1-Port 10-GE SPA meets customers' needs for
various applications. With this SPA, users can mix and match SPA ports with other types of interfaces in the same
slot. The Cisco 1-Port 10-GE SPA is IEEE 802.3ae standards-based for compatibility and interoperability.
Data Sheet
© 2009–2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 2 of 5
Applications
The Cisco 1-Port 10-GE SPAs can be used in any combination of the following applications:
● Residential Triple Play
● Metro Ethernet Services
● Converged Residential and Business Services
● Internet Peering
● Inter- and intra-point of presence (POP) Aggregation
Key Features and Benefits
The Cisco SPA/SIP portfolio offers many advantages, including the following:
● Modular, flexible, intelligent interface processors
Flexible design allows mixing and matching of interface types on the same interface processor for
consistent services, independent of access technology.
Programmable interface processors provide flexibility for the service diversity required in next-generation
networks.
Innovative design provides intelligent delivery of services without compromising performance.
● Increased speed-to-service revenue
The programmable Cisco architecture extended to 10 Gigabits per second dramatically improves customer
density, increasing potential revenue per platform and facilitating compatibility with future versions.
Interface breadth (copper, channelized, POS, ATM, and Ethernet) on a modular interface processor allows
service providers to quickly roll out new services, facilitating consistent, secure services for all customers,
large and small.
XFP interfaces are featured for high-port-count applications with reach flexibility. Future optical technology
improvements can be adopted using existing SPAs.
● Dramatically improved financials for your routing purchase
Improved slot economics and increased density reduce capital expenditures (CapEx).
The ability to easily add new interfaces as they are needed facilitates a "pay-as-you-grow" business model
while still offering a high-density solution.
SPAs are shared across multiple platforms and can be easily moved from one to another, providing
consistent feature support, accelerated product delivery, and a significant reduction in operating expenses
(OpEx) through common sparing as service needs change.
Product Specifications
Tables 1 and 2 provide specifications of the Cisco 1-Port 10-GE SPA, Version 2.
Table 1. Product Specifications
Feature Description
Product Compatibility ● Cisco Catalyst 6500 Series Switches
● Cisco 7600 Series Routers
● Cisco 12000 Series Routers
● Cisco XR 12000 Series Routers
● Cisco ASR 1000 Series Router
● Cisco CRS Carrier Routing System
● Cisco 10000 Series Router
Data Sheet
© 2009–2011 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information. Page 3 of 5
Feature Description
Port Density per SPA One 10 Gigabit Ethernet port
Physical Interface 10-Gbps XFP optics
LED Indicators SPA status-Bicolor green and amber LEDs encode the SPA status as follows:
● LED off-SPA is powered off
● LED amber-SPA is powered on and initializing
● LED green-SPA is powered on and operational
In addition to the status LED, the SPAs also have a bicolor LED dedicated to each port to indicate port status. The
green and amber LEDs encode the port status as follows:
● LED off-Port is not activated by software
● LED amber-Port is activated by software, but there is a problem with the Ethernet link
● LED green-Port is activated by software, and there is a valid Ethernet link
Features and Functions ● Full-duplex operation
● 802.1Q VLAN termination
● 802.1ad QinQ termination (stacked VLAN processing)
● Jumbo frames support (9188 bytes)
● Support for command-line interface (CLI)-controlled online insertion and removal (OIR)
● 802.3x flow control
● Bridge protocol data unit (BPDU), Cisco Discovery Protocoland VLAN Trunking Protocol (VTP) filtering
● Layer 2 Protocol (BPDU, Cisco Discovery Protocol, and VTP) Tunneling
● Layer 2 access list (MAC address-based filtering)
● Up to 8000 VLANs per SPA and subject to a limit of 4000 VLANs per port for 802.1q
● Up to 5000 MAC accounting entries per SPA (source MAC accounting on the ingress, and destination MAC
accounting on the egress)
● Up to 2000 MAC address entries for destination MAC address filtering per SPA, and up to 1000 MAC address
filtering entries per port
● Per-port byte and packet counters for policy drops; oversubscription drops; cyclic-redundancy-check (CRC) error
drops; packet sizes; and unicast, multicast, and broadcast packets
● Per-VLAN byte and packet counters for policy drops; oversubscription drops; and unicast, multicast, and broadcast
packets
● Per-port byte counters for good bytes and dropped bytes
Other software features supported:
● Ethernet over Multiprotocol Label Switching (EoMPLS)
● QoS
● Hot Standby Router Protocol (HSRP)
● Virtual Router Redundancy Protocol (VRRP)
Reliability and Availability OIR of the SPA within the SIP and the optics within the SPA
Network Management Network management:
● Field-replaceable XFP modules
● Host-system CLI
● Simple Network Management Protocol (SNMP)
Inventory- and asset management-related MIBs:
● Entity-MIB (RFC 2737)
● Cisco-entity-asset-MIB
Fault management:
● Cisco-entity-field-replaceable unit (FRU)-control-MIB
● Cisco-entity-alarm-MIB
● Cisco-entity-sensor-MIB
Physical interface management:
● IF-MIB
● Etherlike-MIB (RFC 2665)
Other MIBs:
● Remote Monitoring (RMON)-MIB (RFC 1757)
● Cisco-class-based-QoS-MIB
● MPLS-related MIBs
● Ethernet MIB/RMON
Physical Specifications ● Weight: 0.75 lb (0.34 kg)
● Height: 0.8 in. (2.03 cm) (single height)
● Width: 6.75 in. (17.15 cm)
● Depth: 7.28 in. (18.49 cm)

Specyfikacje produktu

Marka: Cisco
Kategoria: Karta sieciowa/adapter
Model: SPA-1X10GE-L-V2-RF

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Cisco SPA-1X10GE-L-V2-RF, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Karta sieciowa/adapter Cisco

Cisco

Cisco VWIC3-1MFT-T1/E1 Instrukcja

17 Września 2024
Cisco

Cisco VWIC3-4MFT-T1/E1 Instrukcja

22 Sierpnia 2024
Cisco

Cisco SPA-1X10GE-L-V2-RF Instrukcja

2 Lipca 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter

LevelOne

LevelOne FNC-0109TX Instrukcja

14 Października 2024
StarTech.com

StarTech.com ST1000SPEX2T Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST1000SPEX2LT Instrukcja

9 Października 2024
StarTech.com

StarTech.com AF221CE-POE-INJECTOR Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB3LINK Instrukcja

9 Października 2024
StarTech.com

StarTech.com PCMACLINK2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PEX1000SFP Instrukcja

9 Października 2024
StarTech.com

StarTech.com ST2GPEX Instrukcja

9 Października 2024
StarTech.com

StarTech.com USB56KEM2 Instrukcja

9 Października 2024
StarTech.com

StarTech.com PUSBADAP Instrukcja

9 Października 2024