Instrukcja obsługi Chief HB72P
Chief
Projector accessoire
HB72P
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief HB72P (1 stron) w kategorii Projector accessoire. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
8803-000094 Rev. A
02/06/08
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
HB-72P
VIDEO PROJECTOR CEILING MOUNT
FOR DIGITAL PROJECTION TITAN SERIES,
The Chief HB72P video projector ceiling mount is designed to provide fast, simple and secure installation of the
Panasonic PT-D10000U, PT-D10000E, PT-DW10000U and PT-DW10000E. Special roll, pitch, yaw and horizontal
adjustments simplify projection positioning for image alignment. The HB71P mount also has positive registration lock
so that the projector may be removed without losing projector mount registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling be reinforced.MUST
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (5) M6 Washers, Flat
(1) Panasonic mounting bracket (5) M6 x 1.0 x 25mm, Phillips Pan Head Screw
(4) 5/16” Flange Nuts
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the Panasonic mounting bracket over the bottom of your projector lining up with the five threaded inserts
in the bottom of the projector with the five holes in the bracket.
3. Slide the (5) M6 washers, one on each (5) M6 x 25mm screws and install them into the five threaded inserts in
the projector. Securely tighten all five mounting screws at this time.
4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange
nuts.
For projector alignment see attached sheet.
Specyfikacje produktu
Marka: | Chief |
Kategoria: | Projector accessoire |
Model: | HB72P |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Chief HB72P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Projector accessoire Chief
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
Instrukcje Projector accessoire
- Projector accessoire Viewsonic
- Projector accessoire Casio
- Projector accessoire Sanus
- Projector accessoire Chipolino
- Projector accessoire NEC
- Projector accessoire Sanyo
- Projector accessoire Vogel's
- Projector accessoire Barco
- Projector accessoire Gabor
- Projector accessoire Kanto
- Projector accessoire Da-Lite
- Projector accessoire AV:link
- Projector accessoire InFocus
- Projector accessoire Projecta
- Projector accessoire Tempest
Najnowsze instrukcje dla Projector accessoire
19 Września 2024
14 Września 2024
14 Września 2024
14 Września 2024
13 Września 2024
9 Września 2024
7 Września 2024
6 Września 2024
6 Września 2024
6 Września 2024