Instrukcja obsługi Chief HB49E


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief HB49E (1 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
8803-000006
HB
49E
V
IDEO
P
ROJECTOR
C
EILING
M
OUNT
for Eiki LC-SX4/L, LC-X4/L, Christie Digital Vivid Blue, Sanyo PLC-EF30L,
PLC-XF30L,
The Chief HB49E video projector ceiling mount is designed to provide a fast, simple and secure installation of your
projector. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB49E mount also has positive registration lock so that the projector may be removed without losing projector mount
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL INJURY!
All components must be securely fastened to each other and to the ceiling, AND the ceiling
MUST be capable of supporting 5 times the total weight of the installation. If it cannot, the
ceiling MUST be reinforced.
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (6) M8 - 12mm BHSCS
(1) HB Left Mounting Bracket (6) M8 - Flatwasher
(1) HB Right Mounting Bracket (4) 5/16” Flange Nuts
(1) M5.Allen Wrench
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Locate the three threaded brass inserts on each side of the bottom of the projector.
3. Place the mounting brackets on the projector lining up the three mounting holes in the brackets with the three
threaded brass inserts in the bottom of the projector.
4. Using the six M8 12mm screws and flatwashers, screw them into the six threaded inserts in the bottom of the
projector using the allen wrench provided. Securely tighten all six mounting screws at this time.
5. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling. If
not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
6. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with mechanical
installations. A third assistant is recommended.
7. With the help of your assistants, lift the projector and install it to the studs extending from the mounting plate. Be
sure the HB49E mounting plate is seated in the slots prior to releasing hand from handles. Tighten securely
using the 5/16” flange nuts.
For projector alignment see attached sheet.


Specyfikacje produktu

Marka: Chief
Kategoria: Akcesoria do projektora
Model: HB49E

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief HB49E, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Akcesoria do projektora Chief

Chief

Chief RPMC198 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA342 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC266 Instrukcja

31 Grudnia 2025
Chief

Chief RSMC360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA303 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC246 Instrukcja

31 Grudnia 2025
Chief

Chief RSA000S Instrukcja

31 Grudnia 2025
Chief

Chief RSA360 Instrukcja

31 Grudnia 2025

Instrukcje Akcesoria do projektora

Najnowsze instrukcje dla Akcesoria do projektora