Instrukcja obsługi Chief HB32B


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief HB32B (3 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
8803-000104
12/07
CHIEF MANUFACTURING INC. 1-800-582-6480, Fax: 1-877-894-6918, Email: chief@chiefmfg.com
HB-32B
VIDEO PROJECTOR CEILING MOUNT
FOR DIGITAL PROJECTION TITAN SERIES,
The Chief HB32B video projector ceiling mount is designed to provide fast, simple and secure installation of the Barco
CLM10+. Special roll, pitch, yaw and horizontal adjustments simplify projection positioning for image alignment. The
HB32B mount also has positive registration lock so that the projector may be removed without losing projector mount
registration.
WARNING: IMPROPER INSTALLATION MAY RESULT IN SERIOUS PERSONAL
INJURY! All components must be securely fastened to each other and to the ceiling, AND
the ceiling MUST be capable of supporting 5 times the total weight of the installation. If it
cannot, the ceiling be reinforced.MUST
Unpack and check contents:
(1) Deluxe ceiling mount housing assembly. (3) M10 Washers, Flat
(1) Panasonic mounting bracket (3) M10 x 1.5 x 50mm, bolt
(4) 5/16” Flange Nuts (6) .5” x .257” x .625” nylon spacers
INSTALLATION INSTRUCTIONS
1. Turn your projector upside down.
2. Place the three 5/8” tall nylon spacers on the bottom of your projector and stack the second three on top of the
fist ones so they are two spacers tall.
3. Place the Barco custom mounting bracket over on these nylon spacers on the bottom of your projector lining up
with the three threaded inserts in the bottom of the projector with the three holes in the bracket.
4. Slide the (3) M10 washers, one on each (3) M10 x 50mm bolt and install them into the three threaded inserts in
the projector. Securely tighten all three mounting bolts at this time.
4. Be sure that the method of support you are using for the VCM ceiling mount is securely installed to the ceiling.
If not, the ceiling must be reinforced. Improper installation may result in serious personal injury.
5. Attach the VCM housing to your method of support and tighten firmly so the VCM housing is square to the
screen.
PRECAUTION: Installing a ceiling mount requires the presence of two persons familiar with
mechanical installations. A third assistant is recommended.
6. With the help of your assistants, lift the projector and install it to the four studs extending from the mounting
plate. Be sure the Panasonic mounting plate is seated in slots. Tighten securely using the (4) 5/16” flange
nuts.
For projector alignment see attached sheet.


Specyfikacje produktu

Marka: Chief
Kategoria: Akcesoria do projektora
Model: HB32B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief HB32B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Akcesoria do projektora Chief

Chief

Chief RPMC198 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA342 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC266 Instrukcja

31 Grudnia 2025
Chief

Chief RSMC360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA303 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC246 Instrukcja

31 Grudnia 2025
Chief

Chief RSA000S Instrukcja

31 Grudnia 2025
Chief

Chief RSA360 Instrukcja

31 Grudnia 2025

Instrukcje Akcesoria do projektora

Najnowsze instrukcje dla Akcesoria do projektora