Instrukcja obs艂ugi Chief FCK008

Przeczytaj poni偶ej 馃摉 instrukcj臋 obs艂ugi w j臋zyku polskim dla Chief FCK008 (4 stron) w kategorii Projector accessoire. Ta instrukcja by艂a pomocna dla 2 os贸b i zosta艂a oceniona przez 2 u偶ytkownik贸w na 艣rednio 4.5 gwiazdek

Strona 1/4
I N S T A L L A T I O N I N S T R U C T I O N S
FCK008
FCK016
FCK000
Mount Connector
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
FCK000 / FCK008 / FCK016
FCK000 / FCK008 / FCK016 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chiefis a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT WARNINGS AND
CAUTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer鈥檚 responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer鈥檚 responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer鈥檚 responsibility to make sure the combined weight of
all components located on wall mounts and accessories
attached to the wall mounts, does not exceed the weight
capacity specified for the wall mount.
LEGEND
TOOLS and PARTS REQUIRED FOR INSTALLATION
Tighten Fastener
Apretar elemento de fijaci贸n
Befestigungsteil festziehen
Apertar fixador
Serrare il fissaggio
Bevestiging vastdraaien
Serrez les fixations
Loosen Fastener
Aflojar elemento de fijaci贸n
Befestigungsteil l枚sen
Desapertar fixador
Allentare il fissaggio
Bevestiging losdraaien
Desserrez les fixations
B (2)
C (2)
[FCK008 only]
[FCK016 only]
A (1 set)
[FCK000 only]
1/2"
Installation Instructions FCK000 / FCK008 / FCK016
3
INSTALLATION
1. Remove end caps from wall mount rails. (See Figure 1)
Figure 1
2. Attach FCK000, FCK008 or FCK016 (A, B or C) to the wall
mount rails and tighten. (See Figure 2)
NOTE: When attaching the FCK000, use tool included with kit
to tighten the FCK000 to the wall mount rails.
3. Attach wall mount to wall (if not already done) following
installation instructions included with the wall mount.
4. Install accessories following installation instructions
included with accessories.
1
Wall mount
rail end caps
Figure 2
FUSION
Mount
FUSION
Mount
(A), (B)
or (C)
2
FCK000
Tool (included)

Specyfikacje produktu

Marka: Chief
Kategoria: Projector accessoire
Model: FCK008

Potrzebujesz pomocy?

Je艣li potrzebujesz pomocy z Chief FCK008, zadaj pytanie poni偶ej, a inni u偶ytkownicy Ci odpowiedz膮