Instrukcja obsługi Chief CMS380

Chief Akcesoria do projektora CMS380

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief CMS380 (8 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
Truss Ceiling Adapter Accessory
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMS380
CMS380 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively “Milestone”), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
DEFINITIONS
MOUNTING SYSTEM: A MOUNTING SYSTEM is the
primary Chief product to which an accessory and/or component
is attached.
ACCESSORY: AN ACCESSORY is the secondary Chief
product which is attached to a primary Chief product, and may
have a component attached or setting on it.
COMPONENT: A COMPONENT is an audiovisual item
designed to be attached or resting on an accessory or mounting
system such as a video camera, CPU, screen, display,
projector, etc.
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
IMPORTANT SAFETY INSTRUCTIONS
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all accessories are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this accessory can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this accessory is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
accessory.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components located within the mounting system of the
CMS380 does not exceed 500 lbs (226.8 kg).
•The weight capacity of the CMS380 may be LIMITED
to the lowest weight capacity of any other component
or accessory used within the mounting system.
WARNING: Use this accessory only for its intended use as
described in these instructions. Do not use attachments not
recommended by the manufacturer.
WARNING: Never operate this accessory if it is damaged.
Return the accessory to a service center for examination and
repair.
WARNING: The CMS380 accessory is to be used vertically
ONLY! Do NOT install accessory to pipe or truss horizontally.
WARNING: Do not use this accessory outdoors.
NOTE: Accessory is intended to be used with the UL Listed
CPA Extension Column Series (not included).
IMPORTANT ! : The CMS380 accessory is designed for
installation to a steel supporting truss or pipe with an
outside diameter between 1.75" (44.45mm) and 2.0"
(50.8mm).
IMPORTANT ! : The CMS380 accessory is intended to
be used with the UL listed CMS Pipe Series and a 1-1/2"
NPT or NPSM following ANSI/ASME B1.20.1 (Schedule
40, 0.154" minimum thickness steel or aluminum-ASTM
B221) threaded extension column (not included).
--SAVE THESE INSTRUCTIONS--
Installation Instructions CMS380
3
DIMENSIONS
2.38
60.3

Specyfikacje produktu

Marka: Chief
Kategoria: Akcesoria do projektora
Model: CMS380

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief CMS380, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Akcesoria do projektora Chief

Chief

Chief RPMC198 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA342 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC266 Instrukcja

31 Grudnia 2025
Chief

Chief RSMC360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA303 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC246 Instrukcja

31 Grudnia 2025
Chief

Chief RSA000S Instrukcja

31 Grudnia 2025
Chief

Chief RSA360 Instrukcja

31 Grudnia 2025

Instrukcje Akcesoria do projektora

Najnowsze instrukcje dla Akcesoria do projektora

Barco

Barco R9853370 Instrukcja

14 Stycznia 2025
Vogel's

Vogel's PPA 904 Instrukcja

10 Stycznia 2025
Roadinger

Roadinger MBT-3 Instrukcja

7 Stycznia 2025
Peerless-AV

Peerless-AV PE1120-W Instrukcja

26 Grudnia 2024
Peerless-AV

Peerless-AV PAP-SANYO-ST1 Instrukcja

26 Grudnia 2024
Sony

Sony VPLL-Z4111 Instrukcja

22 Grudnia 2024
NeoMounts

NeoMounts BEAMER-C300 Instrukcja

19 Grudnia 2024
NeoMounts

NeoMounts BEAMER-C80 Instrukcja

19 Grudnia 2024
NeoMounts

NeoMounts BEAMER-W050SILVER Instrukcja

18 Grudnia 2024
NeoMounts

NeoMounts CL25-540BL1 Instrukcja

18 Grudnia 2024