Instrukcja obsługi Chief CMA101W

Chief Akcesoria do projektora CMA101W

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chief CMA101W (8 stron) w kategorii Akcesoria do projektora. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
I N S T A L L A T I O N I N S T R U C T I O N S
Ceiling Plate
Spanish Product Description
German Product Description
Portuguese Product Description
Italian Product Description
Dutch Product Description
French Product Description
CMA101
CMA101 Installation Instructions
2
DISCLAIMER
Milestone AV Technologies and its affiliated corporations and
subsidiaries (collectively "Milestone"), intend to make this
manual accurate and complete. However, Milestone makes no
claim that the information contained herein covers all details,
conditions or variations, nor does it provide for every possible
contingency in connection with the installation or use of this
product. The information contained in this document is subject
to change without notice or obligation of any kind. Milestone
makes no representation of warranty, expressed or implied,
regarding the information contained herein. Milestone assumes
no responsibility for accuracy, completeness or sufficiency of
the information contained in this document.
Chief® is a registered trademark of Milestone AV Technologies.
All rights reserved.
IMPORTANT SAFETY INSTRUCTIONS!
WARNING: A WARNING alerts you to the possibility of
serious injury or death if you do not follow the instructions.
CAUTION: A CAUTION alerts you to the possibility of
damage or destruction of equipment if you do not follow the
corresponding instructions.
WARNING: Failure to read, thoroughly understand, and
follow all instructions can result in serious personal injury,
damage to equipment, or voiding of factory warranty! It is the
installer’s responsibility to make sure all components are
properly assembled and installed using the instructions
provided.
WARNING: Failure to provide adequate structural strength
for this component can result in serious personal injury or
damage to equipment! It is the installer’s responsibility to
make sure the structure to which this component is attached
can support five times the combined weight of all equipment.
Reinforce the structure as required before installing the
component.
WARNING: Exceeding the weight capacity can result in
serious personal injury or damage to equipment! It is the
installer’s responsibility to make sure the combined weight of
all components attached to the CMA101 mount does not
exceed 500 lbs (226.8 kg).
NOTE: The weight capacity of the CMA101 mount may be
LIMITED to the lowest weight capacity of any other
component located within the mounting system.
WARNING: Use this mounting system only for its intended
use as described in these instructions. Do not use
attachments not recommended by the manufacturer.
WARNING: Never operate this mounting system if it is
damaged. Return the mounting system to a service center for
examination and repair.
WARNING: Do not use this product outdoors.
WARNING: Do NOT attach to vertical mounting surfaces
such as walls or angled ceilings!
IMPORTANT ! : The CMA101 mount is designed to be:
• mounted to double 2" x 4" wood stud cross bracing
between two 2" x 4" ceiling joists using 5/16" x 3-1/2"
Grade 2 lag bolts (not included); or
• mounted to a concrete ceiling with a minimum
thickness of 8" and a maximum drywall covering of
5/8" using 5/16" x 3-1/2" Grade 2 lag bolts (not
included) with UX10 OR AF8 anchors (not included); or
•
suspended from four 5/16-18 Grade ASTM A307 or
better threaded rods (not included) which are secured
to Unistrut®
(with a maximum span of 48")
by 5/16"
Grade 2 or better nuts (not included).
Threaded rods
must have 18 threads per square inch.
--SAVE THESE INSTRUCTIONS--
Installation Instructions CMA101
3
TOOLS REQUIRED FOR INSTALLATION
PARTS
DIMENSIONS
5/32" (security-included)
Hardware required - not included
(dependent on installation method)
1. Install to wood ceiling joists
• 5/16" x 3-1/2" (minimum length) Grade 2 lag bolts (Qty. 4)
2. Install to concrete
• 5/16" x 3-1/2" (minimum length) Grade 2 lag bolts (Qty. 4)
• Fischer UX10 concrete anchors OR Toggler AF8 concrete anchors (Qty. 4)
3. Install to Unistrut
• 5/16-18 threaded rod (Qty. 4)
• 5/16" Grade 2 nuts (Qty. 8)
• 5/16" Grade 2 washers (Qty. 8)
5/32"
7/32" (wood)
5/16" (AF8)
3/8" (UX10)
A (1)
[CMA101]
B (1)
5/16-18 x 3/8"
C (1)
5/16-18 x 5/16"
D (1)
5/32" (security)
(security)
.69
17.463
1 1/2" NPS
2.00
50.800
127
5.00
127
5.00
101.600
4.00
4.00
101.600
4X
9.931
.39
2.00
50.800
DIMENSIONS: [MILLIMETERS]
INCHES

Specyfikacje produktu

Marka: Chief
Kategoria: Akcesoria do projektora
Model: CMA101W

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chief CMA101W, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Akcesoria do projektora Chief

Chief

Chief RPMC198 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA342 Instrukcja

31 Grudnia 2025
Chief

Chief RSMA360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC266 Instrukcja

31 Grudnia 2025
Chief

Chief RSMC360 Instrukcja

31 Grudnia 2025
Chief

Chief RPMA303 Instrukcja

31 Grudnia 2025
Chief

Chief RPMC246 Instrukcja

31 Grudnia 2025
Chief

Chief RSA000S Instrukcja

31 Grudnia 2025
Chief

Chief RSA360 Instrukcja

31 Grudnia 2025

Instrukcje Akcesoria do projektora

Najnowsze instrukcje dla Akcesoria do projektora

Barco

Barco R9853370 Instrukcja

14 Stycznia 2025
Vogel's

Vogel's PPA 904 Instrukcja

10 Stycznia 2025
Roadinger

Roadinger MBT-3 Instrukcja

7 Stycznia 2025
Peerless-AV

Peerless-AV PE1120-W Instrukcja

26 Grudnia 2024
Peerless-AV

Peerless-AV PAP-SANYO-ST1 Instrukcja

26 Grudnia 2024
Sony

Sony VPLL-Z4111 Instrukcja

22 Grudnia 2024
NeoMounts

NeoMounts BEAMER-C300 Instrukcja

19 Grudnia 2024
NeoMounts

NeoMounts BEAMER-C80 Instrukcja

19 Grudnia 2024
NeoMounts

NeoMounts BEAMER-W050SILVER Instrukcja

18 Grudnia 2024
NeoMounts

NeoMounts CL25-540BL1 Instrukcja

18 Grudnia 2024