Instrukcja obsługi Chamberlain KLIK5C-SS

Chamberlain Zdalne sterowanie KLIK5C-SS

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Chamberlain KLIK5C-SS (16 stron) w kategorii Zdalne sterowanie. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
®®
MODEL KLIK3C-BK2
MODEL KLIK3C-SS
MODEL KLIK5C-BK2
MODEL KLIK5C-SS
UNIVERSAL REMOTE CONTROL
Your remote control can be programmed to operate
up to two devices, such as a garage door opener,
gate operator, or commercial door operator and has
a SMART/ LEARN button. Each button on the remote
control works independently of the other and must
be programmed separately. The images throughout
this manual are for reference only and your product
may look different.
STOP
Read instructions thoroughly
BEFORE beginning. If you are using
this product with residential door
openers, this product must be used
only with door openers manufactured
starting January 1, 1993 that use photoelectric
sensors located near the bottom of the door track.
IMPORTANT: The remote will activate your door or
gate during programming. Be sure the door is clear
of ALL obstructions. Start with the garage door
closed. Make sure the garage door opener has a
working light because it is a programming indicator.
WARNING: This product can expose you
to chemicals including lead, which are
known to the State of California to cause
cancer or birth defects or other reproductive harm.
For more information go to
www.P65Warnings.ca.gov
CONNECT TO THE MYQ®APP
1. Close the garage door.
IMPORTANT: The remote activates the garage
door during programming. Ensure the door is
clear of all obstructions.
2. Look for a Wi-Fi or a Powered by myQ®logo
to determine if your garage door opener is
myQ®compatible. If not, proceed to
programming.
Or
®
3. To start on monitoring the garage door
movements, scan the QR code to download
the myQ®app .
4. To add your remote and name, follow the in-
app instructions in order .
5. After completing setup in the app, you can
control the garage door opener and to receive
notices ever time your garage door opens and
closes.
GETTING STARTED
Determine if the product you are programming the
remote control to has a SMART/LEARN button or
DIP Switches. The SMART/ LEARN button or DIP
Switches are located either on the product or in an
external receiver on or near the product. The
following instructions are for a garage door opener
with a SMART/LEARN Button. For DIP Switch
programming instructions or additional help, see
support.chamberlaingroup.com.
SMART/
LEARN Button
OR
DIP Switch
NOTE: DIP Switch is only available in KLIK3Cmodels
manufactured before 11/2020.
PROGRAM TO GARAGE DOOR
OPENERS WITH A YELLOW LEARN
BUTTON
If your remote was previously programmed to
another type of opener, follow the programming
instructions on the next page to reprogram to a
yellow LEARN button.
Yellow
LEARN
Butt on
1. Start with the garage door closed.
2. Press and immediately release the yellow
LEARN button. The Learn LED glows steady
for 30 seconds. Within 30 seconds...
3. Press and hold the button on the remote
control you wish to use.
4. Release the button when the garage door
opener lights blink or two clicks are heard.
5. Test by pressing the button you just
programmed. The opener activates.
To program the remote to Chamberlain accessories,
refer to the manual provided with the accessory.

Specyfikacje produktu

Marka: Chamberlain
Kategoria: Zdalne sterowanie
Model: KLIK5C-SS

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Chamberlain KLIK5C-SS, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Zdalne sterowanie Chamberlain

Chamberlain

Chamberlain KLIK5C-SS Instrukcja

5 Września 2024
Chamberlain

Chamberlain KLIK5C-BK2 Instrukcja

2 Września 2024
Chamberlain

Chamberlain KLIK3C-SS Instrukcja

31 Sierpnia 2024
Chamberlain

Chamberlain 953EVC-P2 Instrukcja

30 Sierpnia 2024
Chamberlain

Chamberlain KLIK1U Instrukcja

4 Lipca 2024

Instrukcje Zdalne sterowanie

Najnowsze instrukcje dla Zdalne sterowanie

Canal Digitaal

Canal Digitaal Amino Instrukcja

22 Marca 2025
Ikea

Ikea RODRET 405.597.98 Instrukcja

13 Marca 2025
Canal Digitaal

Canal Digitaal MP-201 Instrukcja

11 Marca 2025
Philips

Philips SRU3004WM Instrukcja

10 Marca 2025
Philips

Philips SRU4105WM Instrukcja

10 Marca 2025
RADEMACHER

RADEMACHER DuoFern Wandtaster 9494 Instrukcja

10 Marca 2025
Conrad

Conrad cv 450 Instrukcja

9 Marca 2025
Zalman

Zalman Z-SYNC Instrukcja

26 Lutego 2025
AXIL

AXIL MD 0283 E Instrukcja

19 Lutego 2025
Savio

Savio RC-19 Instrukcja

7 Lutego 2025