Instrukcja obsługi Celestron Elements ThermoTorch 10

Celestron bank mocy Elements ThermoTorch 10

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Celestron Elements ThermoTorch 10 (2 stron) w kategorii bank mocy. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/2

Thank you for purchasing the ThermoTorch 10 3-in-1 Hand

Warmer, Flashlight and Power Bank! With a traditional tactical

ﬂashlight design, it’s CNC aluminum housing is water resistant,

dust proof and drop tested. It has a built in hand warmer feature

that will provide up to 10 hours of scent free heat, a 300 lumen,

CREE ® 5W LED 3 mode ﬂashlight and is capable of charging

your personal electronic devices, with its powerful 10000 mAh

rechargeable lithium ion battery. It is a must have for any serious

outdoor enthusiast!

WARNING: Read all instructions and warnings thoroughly before

using the ThermoTorch 10. Improper use of this product

may result in product damage, excess heat, toxic

fumes, ﬁre or explosion. Not intended for children.

INCLUDED IN THE BOX ARE:

1 - ThermoTorch 10

1 - USB Cable

1 - Rugged canvas holster with belt loop

PARTS CALLOUT:

1. Flashlight with CREE® 300 lumen LED

2. Power Button with Hand warmer LED indicator

3. Main Heating surface/handle

4. End cap

5. Battery indicator LEDs (4)

6. Mini USB “IN” port

7. USB “OUT” port 1: (standard 2.0) 5V - 2.1A

8. USB “OUT” port 2: (standard 2.0) 5V - 1A

1. CHARGING THE INTERNAL LITHIUM

ION BATTERY

Your ThermoTorch 10 has an internal, 10000 mAh rechargeable lithium

ion battery, which allows for up to 12 hours of continuous use at

a constant temperature of up to 45° Celsius (113° Fahrenheit).

The ThermoTorch 10 ships with a partial charge, but you

should charge it completely before using it for the ﬁrst time.

STEPS

1. Unscrew the End cap (4) to expose the USB ports (the cap

will stay tethered to the main housing via nylon cord).

2. Plug the standard USB plug end of the included USB cable into

a USB port on a PC, laptop, car charger or USB 5V 2.1A Max

adapter plug.

3. Plug the mini USB end of the included USB cable into the “IN”

port (6) on your ThermoTorch 10.

4. Once plugged in, the blue LEDs (5) will start blinking indicating

a charge is in progress.

5. Charging is complete when all 4 blue LEDs (5) stop blinking.

2. USING THE FLASHLIGHT

• Press and release the power button (2) to turn on the ﬂashlight.

• The ﬂashlight has 3 modes: Low, Medium and High.

• Each press and release of the power button will toggle through

the modes and then power the ﬂashlight off.

3. USING THE HAND WARMER FEATURE

• Press and hold the power button (2) until the button illuminates blue.

• This indicates the Hand warmer is in use and the Main heating

surface (3) will begin to heat up. In minutes, it will reach its

maximum temperature.

• Press and hold the power button (2) to turn off the hand warmer.

NOTE: To maintain water resistance, the end cap (4) must be

secured tight. Bear this in mind when checking battery

indicator LEDs (5).

4. CHARGING AN EXTERNAL DEVICE

• Simply plug your device’s USB 2.0 plug into one of the standard

USB “OUT” ports (7 or 8)) on the ThermoTorch 10 while the other

end of your charging cable is connected to your smartphone, tablet,

camera or MP3 player.

• The internal battery will automatically start charging your device.

NOTE: You may charge 2 devices at one time- by plugging into

each of the USB “OUT” ports.

NOTE: USB OUT Port 1 (7) is rated at 5v-2.1A out, which is designed

to work best with tablets.

• The battery indicator LEDs (5) will display the battery power

while you charge (1 LED- 25%, 2 LEDs- 50%, 3 LEDs- 75%,

4 LEDs- 100%)

5. SPECIFICATIONS

BATTERY: Rechargeable lithium ion battery– 10000 mAh

INPUT: Mini USB Connector / 5V 1.8A Max

HAND WARMER CONTINUOUS USE TIME: Up to 10 hours

continuous use (based on fully charged battery)

HAND WARMER TEMPERATURE RANGE:

UP TO 45° C (113° F)

IP-65 RATED: Complete dust protection (6) Water resistant (5)

FLASHLIGHT FEATURE: CREE®

XLAMP® XP-G2- 5W

3 MODES

1. LOW: 60 lumens

2. MED: 100 lumens

3. HIGH: 300 lumens

C-LINK FEATURE: Compatible with other Celestron Elements

power banks for extending heat time and recharging the

internal battery

OUTPUT: 2 Standard 2.0 USB ports (Smart Charge Technology):

1. 5V - 2.1A

2. 5V - 1A

AUTO-CHARGE FEATURE: Plug into either USB “OUT” port and

ThermoCharge will automatically start charging your electronic device.

LED STATUS INDICATORS:

(4) Blue- Battery indicator LEDs

(1) Blue- Hand warmer indicator (power button)

OPERATING TEMPERATURE RANGE:

0° to 45° Celsius (32° to 113° Fahrenheit)

STORAGE TEMPERATURE RANGE:

68° to 77° Fahrenheit (optimal)

ACCESSORIES: Rugged canvas holster with belt loop

WEIGHT: 17.14 oz. (486 grams)

DIMENSIONS: 8.2 in x 2.0 in x 2.0 in

(208.3mm x 52.5 mm x 52.5 mm)

POWER DELIVERY CHART:

Smartphone (2100 mAh): 4 charges

Tablet (8200 mAh): 1 charge

MP3 Player (1100 mAh): 7 charges

Sports CAM (1100 mAh): 7 charges

______________________________________

WARNINGS:

Read all instructions and warnings prior to using this product.

Improper use of this product may result in product damage,

excess heat, toxic fumes, ﬁre or explosion, for which damages

you (“Purchaser”), and not Smart Team or Celestron (collectively

“Manufacturer”) are responsible.

• Do not store battery in high temperature environment, including

intense sunlight.

• Do not place battery in ﬁre or other excessively hot environments.

Model # 94553

• Be cautious of excessive drops, bumps, abrasions or other

impacts to this battery. If there is any damage to the battery

such as dents, punctures, tears, deformities or corrosion, due

to any cause, discontinue use and contact manufacturer or

dispose of it in an appropriate manner at your local battery

recycling center.

• Do not disassemble this battery or attempt to repair or modify

it in any manner.

• Do not expose this battery to moisture or submerge it in liquid.

• Do not attempt to charge battery using any method, apparatus

or connection other than the device’s USB connector. For

questions or instructions for the various ways to charge the

Model #94553 3-in-1 Hand Warmer, Flashlight and Power

Bank, refer to this manual.

• Do not attempt to replace any part of this battery.

• This battery is intended for adult use only. If this battery

is intended by Purchaser to be used by a minor, purchasing

adult agrees to provide detailed instructions and warnings to

any minor prior to use. Failure to do so is sole responsibility

of Purchaser, who agrees to indemnify Manufacturer for any

unintended use/misuse by a minor.

• If you ﬁnd that your battery is excessively hot, is emitting odor,

is deformed, abrased, cut or is experiencing or demonstrating

an abnormal phenomenon, immediately stop all battery use and

contact Manufacturer.

• For extended storage, ﬁrst charge your battery for at least one hour.

• It is not recommended to store device for more than 3 months

without use as batteries may have a tendency to discharge.

• Never dispose of batteries in the garbage. Disposal of batteries

in the garbage is unlawful, in The United States, under state

and federal environmental laws and regulations. Always take

used batteries to your local battery-recycling center.

DISCLAIMER:

Manufacturer shall not in any way be liable to you or to any third

party for any damages you or any third party may suffer as a

result of use, intended or unintended, or misuse of this battery.

Manufacturer will not be responsible for any damages you or

any third party may suffer as a result of misuse of this battery

as outlined above. If you are responsible for battery use with an

unintended mobile device and damages result from such use, you

agree to indemnify Manufacturer for any resulting injuries to any

third party or parties.

This device complies with part 15 of the FCC Rules. Operation is

subject to the following two conditions:

(1) This device may not cause harmful interference, and (2)

this device must accept any interference received, including

interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with

the limits for a Class B digital device, pursuant to part 15

of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a

residential installation. This equipment generates uses and

can radiate radio frequency energy and, if not installed

and used in accordance with the instructions, may cause

harmful interference to radio communications. However,

there is no guarantee that interference will not occur

in a particular installation. If this equipment does cause

harmful interference to radio or television reception, which

can be determined by turning the equipment off and on,

the user is encouraged to try to correct the interference

by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and

receiver.

3. Connect the equipment into an outlet on a circuit

different from that to which the receiver is connected.

4. Consult the dealer or an experienced technician for help.

CAUTION : To comply with the limits of the Class B digital device,

pursuant to Part 15 of the FCC Rules, this device is

comply with Class B limits. All peripherals must be

shielded and grounded. Operation with non-certiﬁed

peripherals or non-shielded cables may results in

interference to radio or reception.

MODIFICATION: Any changes or modiﬁcations not expressly

approved by the grantee of this device could

void the user’s authority to operate the device.

Torrance, CA 90503

TEL (800) 421-9649 | celestron.com

(Products or instructions may change without

notice or obligation.)

Designed and intended for those 14 years of age

and older.

V2.0

Specyfikacje produktu

Marka:	Celestron
Kategoria:	bank mocy
Model:	Elements ThermoTorch 10
Kolor produktu:	Szary
Materiał obudowy:	Metal
Wbudowany wyłącznik:	Tak
Wysokość produktu:	40.87 mm
Szerokość produktu:	209.5 mm
Głębokość produktu:	40.87 mm
Waga produktu:	486 g
Podręcznik użytkownika:	Tak
Ilość na paczkę:	1 szt.
Źródło ładowania:	USB
Pojemność baterii:	10000 mAh
Technologia baterii:	Litowo-jonowa (Li-Ion)
Napięcie operacyjne:	5 V
Szybkie ładowanie:	Nie
Przewody:	USB
Typ lamp:	LED
Kolor światła:	Jasny biały
Napięcie:	5 V
Diody LED:	Tak
Stopień ochrony IP:	IP65
Walizka:	Tak
Kształt:	Cylidner
Strumień świetlny:	300 lm
Wbudowana latarka:	Tak
Kompatybilność ładowarki:	Uniwersalne
Porty wyjścia USB A:	2
interfejs wejścia:	Mini-USB
Port 1 - napięcie wyjściowe:	1 A
Port 2 - napięcie wyjściowe:	2 A
Tryby latarki:	High, Low, Medium