Instrukcja obsługi Casio XJ-S58

Casio projektor wideo XJ-S58

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Casio XJ-S58 (39 stron) w kategorii projektor wideo. Ta instrukcja była pomocna dla 13 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/39

Contents

E-1

English

Safety Precautions .....................................E-2

Operating Precautions ...............................E-6

Lamp Handling Precautions ......................E-6

Lamp Replacement Precautions ............... E-6

Other Precautions ..................................... E-7

Unpacking ...................................................E-9

Using the User Documentation on the

CD-ROM....................................................E-9

Projector Features and

Main Functions .........................................E-10

General Guide ...........................................E-10

Remote Controller General Guide ........... E-12

Preparing the Remote Controller............. E-12

Replacing the Remote Controller Battery

.. E-13

Getting Ready ...........................................E-14

Setting Up the Projector .......................... E-14

Setup Precautions ................................... E-15

Adjusting the Projector Elevation Angle

... E-16

Rear Projection

(From the Back of the Screen) ................ E-16

Connecting a Computer to the Projector

... E-17

Connecting to a Standard Video Device

... E-17

Connecting to a Component Video

Output Device.......................................... E-18

Connecting a USB Device to the Projector

(USB Port Equipped Models Only)

............ E-19

Turning On the Projector ......................... E-20

Turning Off the Projector ......................... E-22

Projector Basics .......................................E-23

Selecting the Input Source ...................... E-23

Adjusting the Projected Image ................ E-23

Adjusting the Volume Level..................... E-24

Keystone Correction (KEYSTONE)......... E-25

Using the Setup Menu ..............................E-26

User Maintenance.....................................E-27

Cleaning the Projector............................. E-27

Reattaching the Lens Cover.................... E-28

Replacing the Lamp ................................ E-29

Troubleshooting .......................................E-34

Indicators................................................. E-34

Projector Troubleshooting ....................... E-38

Specifications ...........................................E-40

• DLP is a registered trademark of Texas Instruments Incorporated of the United States.

• Microsoft, Windows, Windows Vista, and PowerPoint are registered trademarks or trademarks

of Microsoft Corporation in the United States and other countries.

• Apple and Macintosh are registered trademarks of Apple Inc. of the United States.

• Adobe and Reader are registered trademarks of Adobe Systems Incorporated.

• XGA is a registered trademark of IBM Corporation of the United States.

• Other company and product names may be registered trademarks or trademarks of their

respective owners.

• The contents of this User’s Guide are subject to change without notice.

• Copying of this manual, either in part or its entirety, is forbidden. You are allowed to use this

manual for your own personal use. Any other use is forbidden without the permission of CASIO

COMPUTER CO., LTD.

• CASIO COMPUTER CO., LTD. shall not be held liable for any lost profits or claims from third

parties arising out of the use of this product or this manual.

• CASIO COMPUTER CO., LTD. shall not be held liable for any loss or lost profits due to loss of

data caused by malfunction or maintenance of this product, or any other reason.

• The sample screens shown in this manual are for illustrative purposes only, and appear

differently from the screens actually produced by the product.

User’s Guide (Basic Operations)

• Be sure to read the “Safety Precautions” on page E-2 and “Operating Precautions” on page

E-6 before trying to use this projector.

• This manual covers only basic operations, including how to set up the projector, basic projector

operations, and how to replace the lamp. For more detailed information, see the User’s Guide

(UsersGuide_English.pdf) on the CD-ROM that comes with the projector.

E-2

Safety Precautions

Thank you for selecting this CASIO product. Be sure to read these “Safety Precautions” before

trying to use it. After reading this User’s Guide, keep it in a safe place for future reference.

About safety symbols

Various symbols are used in this User’s Guide and on the product itself to ensure safe use,

and to protect you and others against the risk of injury and against material damage. The

meaning of each of the symbols is explained below.

Icon Examples

Precautions During Use

●Smoke, odor, heat, loud noise,

and other abnormalities

Should you ever notice smoke, strange

odor, or loud noise being emitted by

the projector, or any other abnormality,

immediately stop using the projector.

Continued use creates the risk of fire and

electric shock. Immediately perform the

following steps.

1. Unplug the projector.

2. Contact your original dealer or authorized

CASIO service center.

●Malfunction

Immediately stop using the projector if

the screen appears abnormal, or if

any other abnormal operation occurs

even though you are operating the

projector correctly. Continued use

creates the risk of fire and electric

shock. Immediately perform the

following steps.

1. Turn off the projector.

2. Unplug the projector.

3. Contact your original dealer or authorized

CASIO service center.

●Power cord

Misuse of the power cord creates the

risk of fire and electric shock.

Make sure that you always observe

the following precautions.

• Make sure that you use a power source with

the same voltage as that specified for the

projector.

• Do not overload a power outlet with too

many devices.

A damaged power cord creates the

risk of fire and electric shock.

Make sure that you always observe

the following precautions.

• Never place heavy objects on the power

cord and never expose it to heat.

• Make sure the power cord is not pinched

between the wall and the rack or table

where the projector is located, and never

cover the power cord with a cushion or

other object.

• Never try to modify the power cord, allow it

to become damaged, or subject it to

excessive bending.

• Do not twist the power cord or pull on it.

Danger This symbol indicates information that, if ignored or applied incorrectly,

creates the risk of death or serious personal injury.

Warning This symbol indicates information that, if ignored or applied incorrectly,

could possibly create the risk of death or serious personal injury.

Caution This symbol indicates information that, if ignored or applied incorrectly,

could possibly create the risk of personal injury or material damage.

A triangle indicates a situation against which you need to exercise caution. The

example shown here indicates you should take precaution against electric shock.

A circle with a line through it indicates information about an action that you should

not perform. The specific action is indicated by the figure inside the circle. The

example shown here means disassembly is prohibited.

A black circle indicates information about an action that you must perform. The

specific action is indicated by the figure inside the circle. The example shown here

indicates you must unplug the power cord from the power outlet.

Warning

E-3

Safety Precautions

English

Never touch the power cord or plug

while your hands are wet.

Doing so creates the risk of electric

shock.

• When using this projector in the country

where you purchased it, be sure to use the

power cord that came with it. Whenever

using the projector in another country, be

sure to purchase and use a power cord that

is rated for the voltage of that country. Also

make sure that you are aware of the Safety

Standards that apply in that country.

●Water and foreign matter

Never allow water to get on the

projector. Water creates the risk of fire

and electric shock.

Never place a vase or any other

container of water on top of the

projector. Water creates the risk of fire

and electric shock.

Water or other liquid, or foreign matter

(metal, etc.) getting into the projector

creates the risk of fire and electric

shock. Should anything get inside the

projector, immediately perform the

following steps.

1. Turn off the projector.

2. Unplug the projector.

3. Contact your original dealer or authorized

CASIO service center.

●Disassembly and modification

Never try to take the projector apart

or modify it in any way. The projector

contains a large number of high-

voltage components that create the

risk of electric shock and burn injury.

Be sure to leave all internal inspection,

adjustment, and repair up to your original

dealer or authorized CASIO service center.

●Dropping and impact

Continued use of the projector after it

has been damaged by dropping or

other mistreatment creates the risk of

fire and electric shock. Immediately

perform the following steps.

1. Turn off the projector.

2. Unplug the projector.

3. Contact your original dealer or authorized

CASIO service center.

●Disposal by burning

Never try to dispose of the projector

by burning it. Doing so can cause an

explosion, which creates the risk of

fire and personal injury.

●Looking into the lens or vents

while lamp is on

Never look directly into the lens or

vents while lamp is on. The strong

light emitted by the projector creates

the risk of eye damage.

●Blocking the vents

Never allow the intake vents (on the

side or back of the projector) or the

exhaust vents (on the front of the

projector) to become blocked. Doing so

causes internal heat build up, which

creates the risk of fire and breakdown

of the projector. Touching the projector

while it is hot creates the risk of burn

injury. Make sure that you always

observe the following precautions.

• Allow at least 30cm (11.8 inches) between

the projector and walls.

• Do not insert the projector into any space

where air circulation is poor.

• Never cover the projector with a blanket or

any similar item.

• Locate the projector on a firm, flat surface

during use. Never use the projector while it

is on a carpet, blanket, towel, seat cushion,

or other pliable surface.

• Never stand the projector up on either end

during use.

●Projector cabinet

Never open the projector’s cabinet.

Doing so creates the risk of electric

shock.

●Cleaning

Before cleaning the projector, be sure

to turn it off and unplug it from the

power outlet. Failure to do so creates

the risk of electric shock.

●Exhaust vents

The exhaust vents become very hot while the

projector is running. Never touch them. Doing

so creates the risk of burn injury. The areas

near the exhaust vents also become quite hot.

Never locate objects made of plastic or other

heat-sensitive materials near or under the

projector. Doing so creates the risk of

deformation and discoloration of the object.

●Lens cover

Be sure to open the lens cover before turning

on the projector. Never close the lens cover

while the projector is in use.

Specyfikacje produktu

Marka:	Casio
Kategoria:	projektor wideo
Model:	XJ-S58
Zakres temperatur (eksploatacja):	5 - 35 °C
Zakres wilgotności względnej:	20 - 80 %
Współczynnik kontrastu (typowy):	1800:1
Liczba portów USB 2.0:	1
Port RS-232:	1
Zasilanie:	AC100~240V, 50/60Hz
Pozycjonowanie na rynku:	Przenośny
Liczba portów VGA (D-Sub):	1
Wejście audio:	1
Zasięg skanowania w poziomie:	31.5 - 91.1 kHz
Zasięg skanowania (długość):	56 - 85 Hz
Wejście komponentu wideo (ypbpr/ycbcr):	1
Złożone wejście wideo:	1
Wyjście audio:	1
Interfejs SCSI:	RS-232
Jasność projektora:	3000 ANSI lumenów
Technologia projekcji:	DLP
Naturalna rozdzielczość projektora:	XGA (1024x768)
Rodzaj źródła światła:	Lampa
Moc lampy:	210 W
Żywotność źródła światła:	2000 h
Ilość kolorów:	16.78 millionów kolorów