Instrukcja obsługi Canon Powershot S330
Canon
Aparat cyfrowy
Powershot S330
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Canon Powershot S330 (4 stron) w kategorii Aparat cyfrowy. Ta instrukcja była pomocna dla 8 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/4
CDI-E062
CDI-E062-010 © 2002 CANON INC.
Step 1 Preparing the Camera
A. Charge the battery pack. (Battery charger types vary by
region.)
Place the battery pack in the battery charger and plug the charger into
an electrical outlet. The charging indicator shines red while charging
and changes to green when the battery pack is charged.
Charging the battery pack takes approximately 130 minutes.
B. Install the battery pack.
C. Install the CF card.
Slide the battery cover open. Press the battery lock while inserting the
battery pack all the way in, aligning the arrows on the camera and
battery pack. Slide the battery cover closed.
CF card eject button
Slide the lock and open the CF card slot cover. Insert the CF card with
its label facing upward until the slot’s eject button fully extends. Close
the CF card slot cover.
Step 2 Shooting
A. Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
) to .
PowerShot S330 DIGITAL
ELPH/DIGITAL IXUS 330
B. Turn on the power.
Press the ON/OFF button until the green power lamp lights.
C. Set the date and time. (first time the camera is powered on)
PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v
2
D. Focus.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Point the camera in the direction of the subject you wish to shoot and press the
shutter button halfway. The camera beeps twice when the subject is in focus.
E. Shoot.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Press the shutter button fully. This activates the shutter and causes the
shutter sound or the beep to sound once. The recorded image is displayed
on the LCD monitor for approximately 2 seconds.
Turn off the power.
Press the ON/OFF button to turn the power off. Even if the ON/OFF button is
not pressed, the power will automatically shut down 3 minutes after the last
control is accessed.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Step 3 Reviewing an Image
A. Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v
2
) to .
B. Turn on the power.
Press the ON/OFF button until the green power lamp lights.
The last recorded image appears in the LCD monitor.
C. View the images.
Use the buttons to display the image you wish to see.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Erasing Images
Display the unwanted image with the buttons and press the button.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
When the confirmation screen appears, check that [Erase] is selected and press
the SET button.
PowerShot S330 DIGITAL ELPH/DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/DIGITAL IXUS v2
Printing Images without Using a Computer
This camera is compatible with the direct print function. By connecting it with a
single cable to a direct print function compatible printer (optional) or a direct
print function compatible Bubble Jet printer, you can easily print your images
with simple operations.
Card Photo Printer CP-10
Direct Print Function Compatible Bubble Jet Printer**
Interface cable
* The interface cable is included with the direct print function compatible printer.
** To find out if your Bubble Jet printer is compatible with the directprint function
and for detailed information regarding the Bubble Jet printer, please refer to
the documentation that came with your printer.
c.
When [Select Components] appears, select your camera
model name and click [Next].
d.
Follow the onscreen instructions.
The software required for the camera will be installed.
e.
When the Installer Panel displays again, after the
installation is complete, click [Exit].
For the USB driver to install correctly the Canon Digital Camera
Solution Disk must be removed from the computer.
B. Connect the camera to the computer.
• When installing the driver, turn the camera’s power off
before connecting the cable to the computer.
a.
Connect the USB cable to the computer.
If the computer has two USB ports, you can use either one of them.
USB Port
USB Cable
b.
Connect the USB cable to the camera.
Open the terminal cover and connect the cable.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Continued on the reverse page.
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
PowerShot S330 DIGITAL ELPH/DIGITAL IXUS 330
The Set Date/Time menu will appear on the LCD monitor when the camera
is first turned on.
Use the buttons to select the items you wish to set, and the
buttons to change the value.
To put the settings into effect, press the button.SET
Interface cable*
Card Photo Printer CP-100
Interface cable*
Step 4 Installing the Software on the
Windows Platform
Macintosh users, please refer to the reverse page.
A. Install the software.
• Do not connect the camera to the computer before the
software is installed.
• The USB driver will start its installation procedures after the
camera has been connected to the computer.
• For more information about the system requirements, please
refer to the Software Starter Guide.
• Users of Windows 2000 and Windows XP Professional must
first log in as an Administrator (computer system
administrator) to install programs.
• Close any programs that are running.
a.
Set the Canon Digital Camera Solution Disk in the
computer’s CD-ROM drive.
The installer panel will display automatically.
If the installer panel does not appear automatically, double-click the
CD-ROM icon from [My Computer] and double-click the [Setup] icon.
b.
Click [Software Installation] and follow the onscreen
instructions that appear.
ENGLISH
This guide explains the required operations the first time
the camera is used, as well as how to install the software
and download images to a computer.
For more information about usage precautions and detailed
instructions, please refer to the manuals listed below.
Usage precautions .............................. Camera User Guide
Camera’s detailed operations ............ Camera User Guide
Simple software operations ............... Software Starter Guide
Detailed software operations (Windows®)
ZoomBrowser EX Software User Guide
(A PDF file on the supplied CD-ROM)
Detailed software operations (Macintosh)
ImageBrowser Software User Guide
(A PDF file on the supplied CD-ROM)
Please refer to the Troubleshooting section of the Software Starter Guide if
you have trouble installing the software or downloading images.
Do not connect the camera to the computer before the software is
installed.
*EC118116hkQSGE,vGM 3/29/02, 2:16 PM1
Step 4 Installing the Software on the Windows Platform (continued)
C. Install the driver.
The TWAIN or WIA driver is required when the camera is connected to
the computer. The installation procedures vary between Windows
versions.
a.
Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL
ELPH/DIGITAL IXUS v
2
) to .
b.
Turn the camera’s power on.
Press the ON/OFF button until the green power lamp lights.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Windows 98
c.
Install the TWAIN driver.
The Insert Disk dialog appears. Click [OK] without inserting
the Canon Digital Camera Solution Disk.
Click the [Browse] button.
Double-click the drive (usually the [C:\] drive) on which you installed
the software to display all of its folders.
PowerShot S330 DIGITAL ELPH/ DIGITAL IXUS S330:
Double-click the following folders in the order [Program Files],
[Canon], [IXY300A PSS330 IXUS330 TWAIN].
PowerShot S200 DIGITAL ELPH/ DIGITAL IXUS v2:
Double-click the following folders in the order [Program Files],
[Canon], [IXY200A PSS200 IXUSV2 TWAIN].
Click [OK]. When the Insert Disk dialog reappears, click [OK].
The driver will install itself automatically and the Event dialog will
display, allowing you to select a program to start.
d.
Select a program to start.
Select [Canon ZoomBrowser EX] and click [OK]. ZoomBrowser EX
will start.
Confirm that [Display images in the Camera Window] is selected
and click the [Finish] button.
Windows 2000
c.
Install the TWAIN driver.
The Add New Hardware Wizard will appear and automatically install
the TWAIN driver.
Once the installation is complete, the Event dialog will display,
allowing you to select a program to start.
If you are prompted to restart the computer, restart the computer
according to the onscreen messages.
d.
Select a program to start.
Select [Canon ZoomBrowser EX] and click [OK]. ZoomBrowser EX
will start.
Confirm that [Display images in the Camera Window] is selected
and click the [Finish] button.
Step 4 Installing the Software on the Windows Platform (continued)
Windows Me
c.
Install the WIA driver.
The Add New Hardware Wizard will appear and automatically install the
WIA driver.
Once the installation is complete, the Scanners and Cameras Wizard
start-up event dialog appears. Click [Cancel].
d.
Start ZoomBrowser EX.
Double-click the [Canon ZoomBrowser EX] icon on the desktop.
ZoomBrowser EX starts.
A confirmation message will appear the first time ZoomBrowser EX
starts, asking whether you wish to register the [My Pictures] folder in
ZoomBrowser EX. Click [Yes] or [No].
e.
Select a camera.
In the Tree View Area, click [Canon Camera].
Windows XP
c.
Install the WIA driver.
The Found New Hardware Wizard will appear and automatically install
the WIA driver.
Once the installation is complete, The ZoomBrowser start-up event
dialog and the Scanners and Cameras Wizard start-up event dialog will
both display.
d.
Select a program to start.
Click [OK] in the ZoomBrowser EX start-up event dialog.
ZoomBrowser EX will start.
Confirm that [Display images in the Camera Window] is selected and
click the [Finish] button.
Step 5 Downloading Images to a
Computer (Windows)
A. Create a new folder for saving images from the camera.
In the Tree View Area, right-click the [Image Library One] folder, select [New
Folder] from the pop-up menu and input a folder name. (For example,
[Travel] or [Wedding])
Select the newly created folder.
Step 5 Downloading Images to a Computer (Windows) (continued)
B. Download the images from the camera.
Selected images
Select the images you wish to download from the Camera window and
click the [Download] button.
The selected images are saved to the computer disk and appear in the
Browser Display Area.
•The folder you created above normally appears within the
[C:\Program Files\Canon\ZoomBrowser EX\Image Library One]
folder. The downloaded image files are saved to the folder you
created.
Step 4 Installing the Software on the
Macintosh Platform
A. Install the software.
•For more information about the system requirements, please
refer to the Software Starter Guide.
•Close any programs that are running.
a.
Set the Canon Digital Camera Solution Disk in the computer’s
CD-ROM drive.
Mac OS 8.6 - 9.2: Double-click the CD-ROM icon, followed by the
[Mac OS 8/9] and [Canon Digital Camera Installer]
icons.
Mac OS X: Double-click the CD-ROM icon, followed by the
[Mac OS X] and [Canon Digital Camera Installer]
icons.
b.
Click [Digital Camera Software Installation].
Mac OS 8.6 9.2 screen shot shown.–
c.
Follow the onscreen instructions.
The software required for the camera will be installed.
Step 5 Downloading Images to a
Computer (Macintosh)
A. Connect the USB cable to the computer.
If the computer has two USB ports, you can use either one of them.
USB Port
USB Cable
Step 5 Downloading Images to a Computer (Macintosh) (continued)
B. Connect the USB cable to the camera.
Open the terminal cover and connect the cable.
C. Set the mode dial (PowerShot S330 DIGITAL ELPH/DIGITAL
IXUS 330) or the mode switch (PowerShot S200 DIGITAL
ELPH/DIGITAL IXUS v2) to .
D. Turn the camera’s power on.
Press the ON/OFF button until the green power lamp lights.
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
PowerShot S330 DIGITAL ELPH/
DIGITAL IXUS 330
PowerShot S200 DIGITAL ELPH/
DIGITAL IXUS v2
Mac OS 8.6 - 9.2 ImageBrowser will start and open the
ImageBrowser Automation Wizard dialog.
Confirm that [Display Images] is selected and click
the [OK] button.
Mac OS X Double-click the [Canon ImageBrowser] icon on
the desktop. Once ImageBrowser is started, click
[Canon Camera] in the Explorer View section.
E. Set the communication settings (first time connection only)
Confirm that [USB Port] and your camera model name are selected and
click the [Set] button.
The Camera window will open and display the camera images.
F. Create a new folder for saving images from the camera.
Selected images
Mac OS 8.6 9.2 screen shot shown.–
In the Explorer View section, select [Macintosh HD]. From the [File]
menu, select [New Folder] and input a folder name. (For example,
[Travel] or [Wedding])
Select the newly created folder.
G. Download the images from the camera.
Mac OS 8.6 – 9.2 screen shot
shown.
Select the images you wish to download in the Camera window and
click the [Download] button.
The selected images are saved to the computer and appear in the
Browser area.
The Camera Window will open and display the camera images.
*EC118116hkQSGE,vGM 3/29/02, 2:16 PM2
Specyfikacje produktu
| Marka: | Canon |
| Kategoria: | Aparat cyfrowy |
| Model: | Powershot S330 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Canon Powershot S330, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Aparat cyfrowy Canon
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
4 Lipca 2024
Instrukcje Aparat cyfrowy
- Aparat cyfrowy Sony
- Aparat cyfrowy Samsung
- Aparat cyfrowy Leica
- Aparat cyfrowy Xiaomi
- Aparat cyfrowy SilverCrest
- Aparat cyfrowy Epson
- Aparat cyfrowy Panasonic
- Aparat cyfrowy Medion
- Aparat cyfrowy Fujifilm
- Aparat cyfrowy Toshiba
- Aparat cyfrowy GE
- Aparat cyfrowy Casio
- Aparat cyfrowy Sigma
- Aparat cyfrowy HP
- Aparat cyfrowy Nikon
- Aparat cyfrowy Kodak
- Aparat cyfrowy Minox
- Aparat cyfrowy Trust
- Aparat cyfrowy AgfaPhoto
- Aparat cyfrowy Kyocera
- Aparat cyfrowy Ricoh
- Aparat cyfrowy Renkforce
- Aparat cyfrowy Rollei
- Aparat cyfrowy Olympus
- Aparat cyfrowy Pulsar
- Aparat cyfrowy GoClever
- Aparat cyfrowy ION
- Aparat cyfrowy Maginon
- Aparat cyfrowy Polaroid
- Aparat cyfrowy Oregon Scientific
- Aparat cyfrowy GoPro
- Aparat cyfrowy TomTom
- Aparat cyfrowy Denver
- Aparat cyfrowy Pentax
- Aparat cyfrowy Bushnell
- Aparat cyfrowy Albrecht
- Aparat cyfrowy Genius
- Aparat cyfrowy BenQ
- Aparat cyfrowy Technaxx
- Aparat cyfrowy Lexibook
- Aparat cyfrowy Powerfix
- Aparat cyfrowy Odys
- Aparat cyfrowy Insta360
- Aparat cyfrowy Lamax
- Aparat cyfrowy Vivitar
- Aparat cyfrowy A-Rival
- Aparat cyfrowy Aiptek
- Aparat cyfrowy AEE
- Aparat cyfrowy Apeman
- Aparat cyfrowy Argus
- Aparat cyfrowy Tevion
- Aparat cyfrowy Easypix
- Aparat cyfrowy Flir
- Aparat cyfrowy Envivo
- Aparat cyfrowy Fisher Price
- Aparat cyfrowy Fuji
- Aparat cyfrowy Ematic
- Aparat cyfrowy Minolta
- Aparat cyfrowy Ingo
- Aparat cyfrowy Veho
- Aparat cyfrowy Dnt
- Aparat cyfrowy Wanscam
- Aparat cyfrowy Drift
- Aparat cyfrowy SeaLife
- Aparat cyfrowy Sakar
- Aparat cyfrowy Qware
- Aparat cyfrowy Jobo
- Aparat cyfrowy Geonaute
- Aparat cyfrowy Guardo
- Aparat cyfrowy Red
- Aparat cyfrowy Digital Blue
- Aparat cyfrowy Traveler
- Aparat cyfrowy Mustek
- Aparat cyfrowy Plawa
- Aparat cyfrowy BML
- Aparat cyfrowy Praktica
- Aparat cyfrowy Somikon
- Aparat cyfrowy BlackVue
- Aparat cyfrowy Brinno
- Aparat cyfrowy Storex
- Aparat cyfrowy Bolyguard
- Aparat cyfrowy Voigtlaender
- Aparat cyfrowy General Electric
- Aparat cyfrowy WASPcam
- Aparat cyfrowy Revue
- Aparat cyfrowy Kompernass - Lidl
- Aparat cyfrowy Guide
- Aparat cyfrowy Umax
- Aparat cyfrowy Magpix
- Aparat cyfrowy Konig Electronic
- Aparat cyfrowy Sipix
- Aparat cyfrowy Nytech
- Aparat cyfrowy Yakumo
- Aparat cyfrowy Konica
- Aparat cyfrowy Duramaxx
Najnowsze instrukcje dla Aparat cyfrowy
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024
28 Września 2024