Instrukcja obsługi BTI Aqua-Solutions FL1000
BTI Aqua-Solutions
filtr do wody
FL1000
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BTI Aqua-Solutions FL1000 (2 stron) w kategorii filtr do wody. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/2

FILTRATION SYSTEM INSTALLATION INSTRUCTIONS
ITEM FL1000
www.btiaquasolutions.com
REV / /1811 19
Remove mounting-bracket from
Filtration System Head. Select “Snap
Fit” (two outside screws) or “Rotary”
(one center screw) bracket mounting.
The “Rotary” bracket mounting should
be used if varying positions of
Filtration System is required in cabinet.
SPECIFICATIONS
• NSF/ANSI 42 & 53 CERTIFIED
• 0.5 MICRON CARBON-BLOCK FILTER
• .55 US GAL/2.1L GPM FLOW RATE
• 1500 US GAL/5,678 L CAPACITY
• 3-STAGE FILTER
• 3” x 11” SPACE SAVING DESIGN
• BUILT-IN PRV
• SQC HEAD
• ECO-FRIENDLY, RECYCLABLE
TOOLS REQUIRED:
PENCIL, SCREWDRIVER
TO VIEW INSTALLATION VIDEO VISIT
www.btiaquasolutions.com
1 2
Measure and mark screw hole(s) for
your desired lter location.
Make sure “Location-Lug” on bracket
is on top.
3
A
Position Filtration System with label and
black location arrow facing you.
Push the lter head into bracket until you
feel it click into place.
It will only t one way, with label and
black location arrow facing you.
4Push one end of tubing (F) into angle shut-
off valve (D). Push other end of tubing into
“L-Fitting”, pre-installed in the “inlet” on top
of lter.
Push one end of tubing (F) into “outlet”
connector on top of lter. Connect other end
of tubing to faucet-stem of ltration faucet.
If using a BTI Filtration Faucet, all items for
connection are supplied with faucet.
To remove a tube, push down on the collet
while pulling on the tube.
Turn on the water supply and check for
leaks. Flush at least one gallon of water
through the system before use. Write the
installation and lter change dates on the
label for future reference.
Location-Lug
NOTE: If using with a BTI
Hot/Cold Filtration Faucet, skip to Step 5.
Install angle shut-off valve (D) supplied with
BTI Filtration System.
Shut-off cold-water supply (E). Disconnect
line/hose (C) to kitchen faucet from cold-water
supply shut-off valve (E).
Connect angle shut-off valve (D) to cold-water
supply shut-off valve (E). Connect line/hose
from kitchen faucet (C) to angle shut-off valve
(D).
Cut the 1/4” O.D. inlet/outlet tubing (supplied)
to the correct lengths, ensuring the cut ends
are square and clean.
(A) FILTRATION FAUCET
(B) BTI FILTRATION SYSTEM
(C) LINE/HOSE TO KITCHEN FAUCET
(D) ANGLE SHUT-OFF VALVE (supplied)
(E) COLD-WATER SUPPLY SHUT-OFF VALVE
(F) 1/4” O.D. TUBING (supplied)
B
C
D
E
F
F
FILTRATION SYSTEM INSTALLATION WITH COLD ONLY FILTRATION FAUCET

FILTRATION SYSTEM INSTALLATION INSTRUCTIONS, continued
ITEM FL1000
www.btiaquasolutions.com
REV / /1811 19
A
5Connect 3/8” Female Side of adapter (G)-
(supplied) to braided blue label
cold-water in hose. Push one end of tubing
(F) into 1/4” Push-Fit Side of adapter (G).
Push other end of tubing (F) into “outlet”
connector on top of filter.
To remove a tube, push down on the collet
while pulling on the tube.
Turn on the water supply and check for
leaks. Flush at least one gallon of water
through the system before use.
Write the installation and filter change dates
on the label for future reference.
Install angle shut-off valve (D) supplied with
BTI Filtration System.
Shut-off cold-water supply (E). Disconnect
line/hose (C) to kitchen faucet from cold-water
supply shut-off valve (E).
Connect angle shut-off valve (D) to cold-water
supply shut-off valve (E). Connect line/hose
from kitchen faucet (C) to angle shut-off valve
(D).
Cut the 1/4” O.D. inlet/outlet tubing (supplied)
to the correct lengths, ensuring the cut ends
are square and clean.
Push one end of tubing (F) into angle shut-
off valve (D). Push other end of tubing into
“L-Fitting”, pre-installed in the “inlet” on top
of lter.
(A) FILTRATION FAUCET
(B) BTI FILTRATION SYSTEM
(C) LINE/HOSE TO KITCHEN FAUCET
(D) ANGLE SHUT-OFF VALVE (supplied)
(E) COLD-WATER SUPPLY SHUT-OFF VALVE
(F) 1/4” O.D. TUBING (supplied)
(G) w/faucet3/8” / 1/4” ADAPTER (supplied )
B
C
D
E
F
F
FILTRATION SYSTEM INSTALLATION W BTI HOT/COLD FILTRATION FAUCET/ AQUA-SOLUTIONS
ITEMS: HC2100, HC2200, HC2400
G
Specyfikacje produktu
Marka: | BTI Aqua-Solutions |
Kategoria: | filtr do wody |
Model: | FL1000 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z BTI Aqua-Solutions FL1000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje filtr do wody BTI Aqua-Solutions

31 Marca 2025

31 Marca 2025
Instrukcje filtr do wody
- filtr do wody Electrolux
- filtr do wody Philips
- filtr do wody Waterco
- filtr do wody Panasonic
- filtr do wody GE
- filtr do wody BRITA
- filtr do wody Haier
- filtr do wody Hyundai
- filtr do wody Fisher & Paykel
- filtr do wody Fiap
- filtr do wody Grohe
- filtr do wody Teesa
- filtr do wody Philco
- filtr do wody Juwel
- filtr do wody Ecowater
- filtr do wody JANDY
- filtr do wody Fluval
- filtr do wody Franke
- filtr do wody Hayward
- filtr do wody Sunbeam
- filtr do wody Eheim
- filtr do wody Puretec
- filtr do wody AstralPool
- filtr do wody Flama
- filtr do wody Waterdrop
- filtr do wody Stiebel Eltron
- filtr do wody Pontec
- filtr do wody Ionmax
- filtr do wody PUR
- filtr do wody AQUAPHOR
Najnowsze instrukcje dla filtr do wody

3 Kwietnia 2025

29 Marca 2025

27 Marca 2025

27 Lutego 2025

21 Lutego 2025

7 Lutego 2025

1 Lutego 2025

16 Grudnia 2024

11 Grudnia 2024

2 Października 2024