Instrukcja obsługi Brother ScanNCut SDX2240D
Brother
Obcinarka do papieru
ScanNCut SDX2240D
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brother ScanNCut SDX2240D (111 stron) w kategorii Obcinarka do papieru. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/111
Be sure to read this document before using the machine.
Operation Manual
Cutting Machine
Product Code: 893-Z05/Z09
i
Terms of Use
IMPORTANT-PLEASE READ CAREFULLY:
This Terms of Use (“Agreement”) is a legal agreement between Brother Industries, Ltd. (“Company”) and you
that governs your use of any Software, installed on or made available by Company for use with sewing or craft
products (“Company Product”). The term of “Software” means any and all contents data, design data, data
format, firmware of Company Product, and PC application or mobile device application.
By using the Software and Company Product, you shall be deemed to have agreed to be bound by the terms of
this Agreement. If you do not agree to the terms of this Agreement, Company is unwilling to license the Software
and you are not allowed to use the Software. Amendments and supplements to this Agreement may be attached
to the Software.
An individual who accepts this Agreement on behalf of an entity represents to Company that he or she has the
legal right to enter into a binding legal agreement for that entity.
Terms and Conditions
1 Grant of License.
1.1 Subject to this Agreement, Company hereby grants you a personal, non-exclusive, non-
transferable and revocable license to use the Software only within the Company Product.
1.2 Your right to use of the Software is licensed and not sold, and solely for your use subject to this
Agreement. Company or its suppliers retains all right, title, and interest relating to Software,
including without limitation all intellectual property rights relating thereto.
2 Restrictions
2.1 Except as expressly set out in this Agreement or as required by any local law, you shall undertake:
2.1.1 not to disassemble, de-compile, reverse engineer, translate or otherwise attempt to learn
the source code of the Software(including the data or contents created by using the
Company Product or contents editing application software; hereinafter the same shall
apply in this Clause 2.);
2.1.2 not to create derivative works based on the whole or any part of the Software;
2.1.3 not to distribute, provide or make available the Software in any form, in whole or in part
to any person without prior written consent from Company;
2.1.4 not to copy the Software, except where such copying is incidental to normal use of the
Software with Company Product or where it is necessary for the purpose of back-up or
operational security;
2.1.5 not to transfer, rent, lease, sub-license, loan, translate, merge, adapt, vary, alter or modify,
the whole or any part of the Software nor permit the Software or any part of it to be
combined with, or become incorporated in, any other programs;
2.1.6 to include Company’s copyright notice and this Agreement on all entire and partial copies
of the Software; and
2.1.7 not to use the Software for any purpose (including, but not limited to, use with
unauthorized sewing/craft products or software) other than as provided under Clause 1 of
this Agreement.
3 No warranty
TO THE EXTENT PERMISSIBLE BY APPLICABLE LAW, THIS SOFTWARE IS PROVIDED TO YOU
"AS IS" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, WHETHER ORAL OR
WRITTEN, EXPRESS OR IMPLIED. COMPANY SPECIFICALLY DISCLAIMS ANY IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY, SATISFACTORY QUALITY, NON-
INFRINGEMENT AND/OR FITNESS FOR A PARTICULAR PURPOSE.
4 Limitation of liability
4.1 COMPANY SHALL NOT BE LIABLE TO YOU, ITS END-USERS OR ANY OTHER ENTITY FOR
ANY LOSS OF PROFITS OR INCOME OR SAVINGS, LOSS OF DATA, INTERRUPTION OF USE,
OR CONSEQUENTIAL, INCIDENTAL, SPECIAL, PUNITIVE OR INDIRECT DAMAGES
INCURRED BY SUCH PARTY (WHETHER IN AN ACTION IN CONTRACT OR TORT), EVEN IF
COMPANY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES, ARISING OUT
OF OR RELATING TO THE SOFTWARE, SUPPORT SERVICE OR THIS AGREEMENT. THESE
ii
LIMITATIONS SHALL APPLY TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE LAW
NOTWITHSTANDING ANY FAILURE OF ESSENTIAL PURPOSE OF ANY LIMITED REMEDY.
4.2 NOTWITHSTANDING THE CLAUSE 3 OR 4.1 HEREOF, THIS AGREEMENT DOES NOT
PURPORT TO EXCLUDE OR RESTRICT COMPANY'S LIABILITY FOR DEATH OR PERSONAL
INJURY RESULTING FROM NEGLIGENCE OR LIMIT THE STATUTORY RIGHTS OF A
CONSUMER.
5 Termination
5.1 Company shall have the right to terminate this Agreement at any time by providing a written
notice to you if you commit a material breach of any terms of this Agreement and fail to
immediately rectify such breach upon Company’s request.
5.2 Upon termination for any reason all rights granted to you under this Agreement shall cease, you
shall cease all activities authorized by this Agreement and you shall immediately delete or
remove the Software from all computer equipment in your possession and delete or destroy all
copies of the Software or its derivative works in your possession. In addition to the above, you
shall delete contents or design data created by you from the Company Product in your
possession.
6 Miscellaneous terms
6.1 You shall not export or re-export the Software or any copy or adaptation thereof in violation of
any applicable laws or regulations.
6.2 You shall not assign all or any part of this Agreement to any third party or any interest therein,
without prior written consent of Company. A change of control or reorganization of you
pursuant to a merger, sale of assets or stock shall be deemed to be an assignment under this
Agreement.
6.3 You agree that a breach of this Agreement will cause irreparable injury to Company for which
monetary damages would not be an adequate remedy and Company shall be entitled to seek
equitable relief in addition to any remedies it may have hereunder or at law without a bond,
other security, or proof of damages.
6.4 If any provisions of this Agreement shall be declared or determined as void or unenforceable by a
court of competent jurisdiction, such provisions shall be severable and independent from the
other provisions of this Agreement and the validity of the other provisions and of the entire
Agreement shall not be affected thereby.
6.5 This Agreement, together with all exhibits or other attachments referenced herein, constitutes the
entire agreement between the parties on the subject matter hereof, and supersedes all proposals,
oral and written, between the parties on this subject.
6.6 If Company fails to insist that you perform any of your obligations under this Agreement, or if
Company does not enforce any rights against you, or if Company delay in doing so, that will not
mean that Company have waived any rights against you and will not mean that you do not have
to comply with those obligations. If Company does waive a default by you, Company will only
do so in writing, and that will not mean that Company will automatically waive any later default
by you.
6.7 This Agreement is governed by the laws of Japan and Japanese Courts shall have exclusive
jurisdiction with respect to this Agreement except with regard to enforcement in which case the
jurisdiction of the Japanese Courts shall be non-exclusive.
6.8 The Company may update this Agreement in the below cases: A) When the changes are made for
the users’ benefit, or B) When the updates to the Agreement are adequate, reasonable, and not
contrary to the purposes of the Agreement. The Company will notify you and give you the
opportunity to review any material changes or updates to the Agreement, by posting a notice on
the Company’s website or a website specified by the Company at least 30 days before the
Agreement enters into effect. Once the updated Agreement is in effect, you will be bound by it if
you continue to use the Software.
Specyfikacje produktu
| Marka: | Brother |
| Kategoria: | Obcinarka do papieru |
| Model: | ScanNCut SDX2240D |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Brother ScanNCut SDX2240D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Obcinarka do papieru Brother
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
Instrukcje Obcinarka do papieru
- Obcinarka do papieru Fellowes
- Obcinarka do papieru Roland
- Obcinarka do papieru Renkforce
- Obcinarka do papieru Camry
- Obcinarka do papieru Dahle
- Obcinarka do papieru Genie
- Obcinarka do papieru Rexel
- Obcinarka do papieru Olympia
- Obcinarka do papieru Ideal
- Obcinarka do papieru Acco
- Obcinarka do papieru United Office
- Obcinarka do papieru DESQ
- Obcinarka do papieru Swordfish
- Obcinarka do papieru Ideen Welt
Najnowsze instrukcje dla Obcinarka do papieru
6 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024
2 Października 2024