Instrukcja obsługi Brother DC200

Brother maszyna do cięcia DC200

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Brother DC200 (70 stron) w kategorii maszyna do cięcia. Ta instrukcja była pomocna dla 7 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/70
Be sure to read this document before using the machine.
Operation Manual
Cutting Machine
Product Code: 891-Z08
1
Thank you for purchasing this machine.
Before using this machine or attempting any maintenance, carefully read the “IMPORTANT SAFETY
INSTRUCTIONS” on the Product Safety Guide, and then study the Operation Manual for the correct operation
of the various functions. In addition, after you have finished reading this manual, store it where it can quickly be
accessed for future reference. Failure to follow these instructions may result in an increased risk of personal
injury or damage to property, including through fire, electrical shock, burns or suffocation.
This machine is intended for household use.
This machine is approved for use in the country of purchase only.
Due to product quality improvements, the specifications or appearance of this machine may change without notice.
The contents of this document are subject to change without notice.
The actual operations and screens may differ, for example, after the application has been upgraded.
The contents of this document may not be duplicated or reproduced, partially or in full, without permission.
We assume no responsibility for damages arising from earthquakes, fire, other disasters, actions of third parties, the user’s
intentional or negligent operation, misuse or operation under other special conditions.
For additional product information, visit our website at www.brother.com
Symbols Used in This Document
The following symbols are used in this document.
IBM is a registered trademark or a trademark of International Business Machines Corporation.
Microsoft and Windows are registered trademarks or trademarks of Microsoft Corporation.
Wi-Fi Protected Setup(WPS) is a trademark of Wi-Fi Alliance.
WPA™ and WPA2™ are trademarks of Wi-Fi Alliance®.
Mac, OSX, and Apple are trademarks of Apple Inc., registered in the United States and other countries.
App Store is a service mark of Apple Inc., registered in the United States and other countries.
Each company whose software title is mentioned in this manual has a Software License Agreement specific to its
proprietary programs.
All other brands and product names mentioned in this manual are registered trademarks of their respective
companies. However, the explanations for markings such as ® and ™ are not described within the text.
INTRODUCTION
IMPORTANT NOTICE
IMPORTANT SAFETY INSTRUCTIONS
CAUTION
Failure to observe instructions with this marking may result in serious
injuries.
TRADEMARKS
2
INTRODUCTION .......................................... 1
IMPORTANT NOTICE ................................... 1
IMPORTANT SAFETY INSTRUCTIONS ......... 1
Symbols Used in This Document........................... 1
TRADEMARKS ............................................... 1
MACHINE FEATURES .................................... 3
Devices That Can Connect to This Machine.......... 3
About This Manual ................................................. 3
1 GETTING STARTED............4
PARTS AND FUNCTIONS ............................. 4
Unit Descriptions - Front ........................................ 4
Unit Descriptions - Rear......................................... 4
Unit Descriptions - Operation Panel ...................... 5
Included Accessories ............................................. 5
TURN ON THE MACHINE ............................ 6
Removing the Transport Packing Materials ........... 6
Turning On/Off the Machine................................... 6
DesignNCut Manager WINDOWS ................ 7
SETTINGS SCREENS ...................................... 9
Machine Settings.................................................... 9
Auto Shut Down..................................................... 9
DesignNCut Manager Settings............................. 10
CONNECTING THE MACHINE AND
COMPUTER................................................. 12
Selecting the Connection Method........................ 12
Wireless Connection ............................................ 12
Direct PC Connection Using USB Cable (Windows
Only) ..................................................................... 18
Resetting the Wireless Connection Setup ........... 20
Checking the Wireless LAN Settings/Connection
Status ................................................................... 20
Setting Up Manually............................................. 21
REGISTER DesignNCut ON
ScanNCutCanvas ......................................... 22
FIRST STEPS................................................. 24
Mat and Material Combinations........................... 24
Attaching the material to the mat......................... 26
Adjusting the Blade Extension ............................. 32
Installing and Uninstalling the Holder................... 34
2 BASIC OPERATIONS........35
PATTERN CUTTING .................................... 35
Tutorial 1 - Cutting Patterns................................. 35
3 ADVANCED OPERATIONS
.........................................41
DRAWING FUNCTIONS............................. 41
Drawing ................................................................ 41
Using Drawing Functions to Fill Patterns/Make
Outlines Thicker ................................................... 43
Cutting Around Drawings ..................................... 45
CaptureMat FUNCTION..............................48
Tutorial 2 - Cutting Photographed Material ......... 48
4 APPENDIX ....................... 51
CONSUMABLES........................................... 51
Replacement Criteria............................................ 51
Replacing the Blade ............................................. 51
CARE AND MAINTENANCE ........................53
Cleaning ............................................................... 53
Adjusting the Mark Sensors................................. 55
TROUBLESHOOTING .................................56
Finding the Wireless LAN Security Information
(Network Name (SSID) and Network Password
(Key)) .................................................................... 56
If the Machine Stops Operating Correctly............ 56
ERROR MESSAGES....................................... 59
Cutting Machine Error.......................................... 59
DesignNCut Manager Error.................................. 61
UPDATING THE SOFTWARE....................... 66
Update Procedure Using DesignNCut Manager
.... 66
Update Procedure Using Computer .................... 66
OPTIONAL ACCESSORIES...........................67
PRODUCT SPECIFICATIONS.......................67
INDEX..........................................................68
CONTENTS

Specyfikacje produktu

Marka: Brother
Kategoria: maszyna do cięcia
Model: DC200

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Brother DC200, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje maszyna do cięcia Brother

Brother

Brother DC200 Instrukcja

5 Września 2024
Brother

Brother CM350 Instrukcja

21 Sierpnia 2024

Instrukcje maszyna do cięcia

Najnowsze instrukcje dla maszyna do cięcia

Genius

Genius Nicer Dicer Quick Instrukcja

11 Stycznia 2025
Eldom

Eldom Sliss KR350 Instrukcja

11 Stycznia 2025
RGV

RGV Desy AF 220 AM Instrukcja

10 Stycznia 2025
RGV

RGV Desy AF 275 F Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-3 Instrukcja

10 Stycznia 2025
Royal Catering

Royal Catering RCKS-2 Instrukcja

10 Stycznia 2025
Ovela

Ovela OVSAFSLCERA Instrukcja

5 Stycznia 2025
Royal Catering

Royal Catering RCAM-250 Instrukcja

3 Stycznia 2025
Royal Catering

Royal Catering RCES-215/12 Instrukcja

31 Grudnia 2025
CaterChef

CaterChef 537150 Instrukcja

31 Grudnia 2025