Instrukcja obsługi Bowers Wilkins Zeppelin Pro

Bowers Wilkins głośnik Zeppelin Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bowers Wilkins Zeppelin Pro (6 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/6
Zeppelin
2
ENGLISH
www.bowerswilkins.com
Welcome to Bowers & Wilkins and Zeppelin Pro Edition
When John Bowers first established Bowers & Wilkins he did so in the belief that
imaginative design, innovative engineering and advanced technology were keys
that could unlock the enjoyment of audio in the home. That belief continues to
inspire every product we design.
Zeppelin Pro Edition is a network connected, wireless active speaker that
provides extremely high performance. Zeppelin Pro Edition is primarily intended
to be configured and controlled using the Bowers & Wilkins Music App. The app
is available for both iOS and Android devices. Some commonly used control
functions are also available via touch buttons on the Zeppelin Pro Edition rear
panel. It is only possible to install and configure a Zeppelin Pro Edition using the
Bowers & Wilkins Music App.
Zeppelin Pro Edition will enable you to:
• Listen to audio from streaming services like Tidal, Qobuz, Deezer, Spotify,
Apple Music, and many others.
• Listen to audio over Bluetooth from appropriately enabled Bluetooth source
devices.
• Listen to audio playing anywhere in your home on any compatible Bowers &
Wilkins Wireless speaker connected to your home network.*
The Bowers & Wilkins Music App is required to connect your Zeppelin Pro Edition
to your home network and also to establish connection with other Formation
products in your home. The Bowers & Wilkins Music App also provides some
control and configuration functions during use. Before you begin your Zeppelin
Pro Edition installation, please download and install the Bowers & Wilkins Music
App on your iOS or Android device. The Bowers & Wilkins Music App requires
iOS 11.4 or later, or Android V8.1 or later. Bluetooth and WiFi services must be
enabled on your iOS or Android device. You will also need to know your WiFi
network password.
Note: Location Services must be enabled on Android devices during the setup
process. This is because Formation products use a low power form of Bluetooth
(BT-LE) for service communication which on Android devices is only switched on
when Location Services are enabled. Bowers & Wilkins do not use any location
services data for marketing purposes.
*Feature to be enabled in early 2022; compatible with Formation speakers
3
ENGLISH
1. Contents
Zeppelin Pro Edition
Power cable
Literature pack
2. Installing Your Zeppelin Pro Edition
Your Zeppelin Pro Edition requires a mains power
supply to operate so it must be located within reach
of a mains socket. If your Zeppelin Pro Edition is to
use a wired connection to your home network, it will
need to be located within reach of an appropriate
network (Ethernet) cable and use a USB-C to
Ethernet adaptor – see section 2.1.
Your Zeppelin Pro Edition can be placed on a shelf,
table or furniture unit, or it can be wall-mounted on
a dedicated wall bracket which is available as an
accessory to purchase online.
If you decide to place your Zeppelin Pro Edition
on a shelf, ensure that the shelf is easily able to
support the weight. The audio performance may be
diminished if mounting furniture or shelf panels are
flimsy or resonant.
Note: If your Zeppelin Pro Edition is to be
mounted on a wall bracket, be sure to install
the bracket in line with its included instructions.
If you are unsure of the suitability of a wall,
or of your ability to install the wall bracket,
you should engage specialist help. Stud-work
and plasterboard walls are unlikely to provide
adequate strength or rigidity to support a
Zeppelin Pro Edition speaker and bracket.
Like the vast majority of speakers, your Zeppelin
Pro Edition radiates sound energy not only forward
but also to the side and rear. Consequently, if your
Zeppelin Pro Edition is positioned close to room
boundaries, or particularly in a corner, bass may
become overemphasised. If you find that bass from
your Zeppelin Pro Edition is too prominent, moving
it to an alternative position may be beneficial, or you
can lower the bass level via the Bowers & Wilkins
Music App Settings menu.
2.1 Connections
In addition to a mains power socket, your Zeppelin
Pro Edition speaker also has a USB-C connection
for service. It is possible to connect the Zeppelin Pro
Edition to a wired (Ethernet) connection with the use
of an Ethernet-to-USB-C adaptor (not supplied).
Note: Please connect your Wi-Fi or wired LAN to
a commercially available router that is certified as
telecommunications terminal equipment.
2.2 Switching On and Off
With all connections made, and the Bowers &
Wilkins Music App installed on your mobile device,
your Zeppelin Pro Edition is ready to be set up. Your
Zeppelin Pro Edition has no mains power switch and
once connected to mains will run a short start-up
routine before being ready to use. The start-up
routine includes booting up the speaker, connecting
to the network and establishing a link to any
streaming services and, therefore, can take some
time to complete. During this time the Multifunction
button will flash white during boot up and amber
when establishing a network connection. It will
play an audio prompt when its start-up routine is
complete.
When a Zeppelin Pro Edition that has not
been previously used is first switched on, it will
automatically enter setup mode to enable its
connection to your home network. Setup mode is
indicated by a slow amber pulse illumination of the
Multifunction button (see Diagram 1). The Zeppelin
Pro Edition will also appear in the Bowers & Wilkins
Music App as available for set up, either as a pop-
up or after selecting ‘Add Product’ from the app
Settings page.
Your Zeppelin Pro Edition manages its operational
state and power consumption entirely automatically
and will switch to a power saving mode after twenty
minutes of inactivity. There is no need ever to switch
off your Zeppelin Pro Edition, however, should you
wish to do so, simply disconnect it from the mains
power. Your Zeppelin Pro Edition will retain its
settings without mains power.
3. Restarting / Rebooting
You can restart a Zeppelin Pro Edition speaker
with a short press and release of the Reset button
located on the rear panel (see Diagram 1). Pressing
the button will reboot the Zeppelin Pro Edition off
and on again. All settings will be retained when your
Zeppelin Pro Edition restarts. You can also restart
your Zeppelin Pro Edition via the Bowers & Wilkins
Music App Settings page.
4. Factory Reset
If you wish to reset your Zeppelin Pro Edition to its
factory default settings, press and hold the Reset
button for five seconds. The Reset button location
can be seen in Diagram 1. The reset process will be
indicated by a red Multifunction button and an audio
queue; this process will shut down the Zeppelin Pro
Edition. On restart, your Zeppelin Pro Edition will
enter setup mode. All settings will be deleted when
your Zeppelin Pro Edition resets. You can also reset
your Zeppelin Pro Edition via the Bowers & Wilkins
Music App Settings menu.
5. Setting up on a Network
With your Zeppelin Pro Edition in setup mode and
with its Multifunction button pulsing slowly amber,
launch the Bowers & Wilkins Music App on your
iOS or Android device. The app will guide you with
prompts through the setup process.
Note: Zeppelin Pro Edition employs a Bluetooth
connection to the device running the Bowers
& Wilkins Music App during the setup process.
Bluetooth signals have a relatively short range
and can be interrupted by room boundaries, so
we recommend that your Zeppelin Pro Edition
and Bowers & Wilkins Music App device remain
close to the product during the setup process.
The Bowers & Wilkins Music App requires you to
create a user account. When you first download the
app, you will be asked to sign into your account if
you already have one, or create an account. You will
need to input a username and password. You can
also modify the notifications for your account before
setting up. Once you have created an account, you
will need to validate the email address by clicking the
link that will have been sent to your email address.
The Bowers & Wilkins Music App will first search
for any products in setup mode and then will
automatically prompt you to start the setup process.
Alternatively, you can set up a new product from the
Settings menu by selecting ‘Add Product’ under the
‘Your Devices’ section.
The setup process in the Bowers & Wilkins Music
App will ask you to name the ‘Space’ in which
your Zeppelin Pro Edition is to be used. A list of
suggested space names is provided but you can
also create your own. When you have selected or
created a space name, the app will ask you to press
the Multifunction button on the top of your Zeppelin
Pro Edition to confirm the selection.
If a wireless network connection is to be used for
your Zeppelin Pro Edition, the next setup stage is to
connect your Zeppelin Pro Edition to your home WiFi
network. The app will ask you to confirm the correct
WiFi network and ask you to input its password.
Alternatively, if your Zeppelin Pro Edition is
connected to your network router using an Ethernet
cable and a USB-C to Ethernet adaptor, this stage of
the setup process will be bypassed.
Note: If you already have other Bowers & Wilkins
compatible products connected to your WiFi
network, the Zeppelin Pro Edition will not require
you to input your WiFi password as this will be
shared securely via the Quick Connect function.
With WiFi network configuration and space selection
complete, your Zeppelin Pro Edition is ready for use.
Your Zeppelin Pro Edition will play an audio prompt
to confirm successful setup.
Diagram 1
Zeppelin Pro Edition control panel and connectors
MultifunctionPause / Play
Power ResetUSB-C

Specyfikacje produktu

Marka: Bowers Wilkins
Kategoria: głośnik
Model: Zeppelin Pro

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bowers Wilkins Zeppelin Pro, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Bowers Wilkins

Bowers Wilkins

Bowers Wilkins Zeppelin Pro Instrukcja

10 Stycznia 2025
Bowers Wilkins

Bowers Wilkins HTM2 D3 Instrukcja

30 Grudnia 2025
Bowers Wilkins

Bowers Wilkins HTM1 D3 Instrukcja

30 Grudnia 2025
Bowers Wilkins

Bowers Wilkins 603 S3 Instrukcja

30 Grudnia 2025
Bowers Wilkins

Bowers Wilkins DB1D Instrukcja

25 Września 2024
Bowers Wilkins

Bowers Wilkins CT8.2 LCR Instrukcja

23 Września 2024
Bowers Wilkins

Bowers Wilkins 2000 series Instrukcja

23 Września 2024
Bowers Wilkins

Bowers Wilkins Formation Flex Instrukcja

21 Września 2024
Bowers Wilkins

Bowers Wilkins 2003 Instrukcja

21 Września 2024
Bowers Wilkins

Bowers Wilkins CWM7.4 S2 Instrukcja

20 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

V-TAC

V-TAC VT-6203-2 Instrukcja

10 Stycznia 2025
Hercules

Hercules XPS 41 Instrukcja

10 Stycznia 2025
Infinity

Infinity Reference REF697CF Instrukcja

10 Stycznia 2025
Fusion

Fusion EL-F653W Instrukcja

10 Stycznia 2025
SoundTube

SoundTube CM52-BGM-II Instrukcja

10 Stycznia 2025
SoundTube

SoundTube CM31-EZ Instrukcja

10 Stycznia 2025
SoundTube

SoundTube CM62-BGM-II Instrukcja

10 Stycznia 2025
SoundTube

SoundTube DS31-EZ Instrukcja

10 Stycznia 2025
Kicker

Kicker 51MSS8 Instrukcja

10 Stycznia 2025
SoundTube

SoundTube CM600i Instrukcja

10 Stycznia 2025