Instrukcja obsługi Bowers Wilkins DB1D

Bowers Wilkins głośnik DB1D

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bowers Wilkins DB1D (103 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/103
DB Series
Subwoofers
2
ENGLISH
bowers-wilkins.com
Welcome to Bowers & Wilkins and the DB Series subwoofers.
Thank you for choosing Bowers & Wilkins. When John Bowers
rst established our company he did so in the belief that imaginative
design, innovative engineering and advanced technology were
keys that could unlock the enjoyment of audio in the home. His
belief is one that we continue to share and it inspires every
product we design.
Before connecting and operating this mains powered apparatus,
please read carefully and observe the Important Safety Instructions
in the accompanying leaet.
This manual covers all DB Series subwoofers.
ENGLISH
Contents
ENGLISH 2
1. Carton Contents 3
2. Introduction 3
Set Up and Control 3
Room Equalisation 3
Multiple Inputs 3
Level Adjustment 3
Low Pass Filter Set up 3
Input EQ 3
3. Installing your Subwoofer 3
3.1 Before You Begin 3
3.2 Positioning 3
3.3 Subwoofer Foot Options 4
3.4 Subwoofer Grilles 4
3.5 Connections 4
Mains Power 4
Signal Connections 4
1 - XLR inputs 4
Control Connections 4
3 - 12V Trigger 1: 3.5mm jack socket 4
4 - 12V Trigger 2: 3.5mm jack socket 4
5 - RS-232: 9-pin D connector 4
4. Set Up and Control 5
4.1 Room Equalisation 5
4.2 Input Set up 6
5. Subwoofers In Use 7
6. Default Reset 7
7. Cleaning 7
8. Support 7
3
ENGLISH
1. Carton Contents
1. DB Series subwoofer
2. Power cable(s)
3. Speaker grilles
4. Spike, decoupling and rubber feet
5. Literature pack
2. Introduction
Your DB Series subwoofer is an extremely high
performance product that will reward thoughtful
installation. We suggest that you take some time to
read this manual before you begin.
DB Series subwoofers can be used for low frequency
applications in both conventional stereo and home
theatre systems. They incorporate a comprehensive
set of features that enhance versatility and enable
performance to be nely tuned to the listening
room, listening position and programme material.
These features are briey described in the following
paragraphs:
Set Up and Control
DB Series subwoofers can be set up and controlled
only via the Bluetooth connected Bowers & Wilkins
DB Subwoofers app for iOS and Android devices.
Before you begin installing your subwoofer, please
download and install the DB Subwoofers app on
your iOS or Android device. It is not possible to set
up or use a DB Series subwoofer without the app.
Note: The DB Subwoofers app requires iOS
version 10 and Android version 5 or later.
Bluetooth must be switched on in the iOS or
Android settings.
Room Equalisation
DB Series subwoofers can automatically
optimise their performance to match the acoustic
characteristics of the listening environment.
Multiple Inputs
DB Series subwoofers provide RCA Phono and
balanced XLR stereo analogue inputs. The inputs
can be connected simultaneously and congured
independently for different system applications.
Level Adjustment
DB Series subwoofers incorporate both level
adjustment and trim adjustment. The trim adjustment
enables optimum matching of different source output
levels so that the subwoofer volume level matches
that of the main speakers for all inputs.
Low Pass Filter Set up
DB Series subwoofers provide low pass lter
options for stereo congurations for both RCA
and XLR connections. When using mono (LFE)
connections the bass management functions of the
source equipment should be employed. For stereo
installations the low pass lter characteristics can
be matched to either specic Bowers & Wilkins
main speakers or to alternative manufacturer's main
speaker specications.
Input EQ
DB Series subwoofers provide optional equalisation
presets designed to suit music and movie
programme material. Custom equalisation via a ve
band equaliser is also provided.
Diagram 1a
DB4S positioning in a stereo (2.1) system
Diagram 1b
DB1D, DB2D and DB3D positioning in a home theatre
(5.1) system
3. Installing your Subwoofer
3.1 Before You Begin
Please follow the unpacking instructions printed on
the outer carton.
Your DB Series subwoofer is heavy and should be
unpacked by two people working together close to
its nal installed position.
Note: Due to the dual driver design of the
DB1D, DB2D, and DB3D subwoofers we
do not recommend that they are suitable for
installation within custom built furniture. If
furniture installation is necessary, multiple DB4S
subwoofers are likely to offer a more satisfactory
solution. In any case, built-in furniture must be
structurally adequate to support the weight of the
subwoofer or subwoofers and provide at least
20cm (8 inches) clearance around the subwoofer
sides, back, and top.
3.2 Positioning
DB Series subwoofers are more versatile than most
subwoofers in terms of positioning thanks to their
Room EQ optimisation system that can compensate
for less than ideal positioning.
Best results however will be obtained if your DB
Series subwoofer is placed between the left and
right speakers or in the vicinity of one of them.
Placing a subwoofer to the side, but still to the
front of the listeners is an acceptable compromise
if domestic considerations dictate, however the
subwoofer should not be located behind the
listening position.
If two subwoofers are to be used it is best to
position one near the left speaker and one near
the right speaker. Diagrams 1a and 1b illustrates
subwoofer positioning.
Note: DB1D, DB2D and DB3D models should be
orientated with their twin drivers facing sideways.
The DB4S should be orientated with its single
driver facing outwards into the room.
Note: Using two subwoofers in a single
installation can improve performance by
maintaining stereo separation to the lowest
frequencies, averaging the effects of low
frequency room resonances and enabling a
higher maximum volume level. In the case of
two subwoofers used in a conventional stereo
system, stereo separation will only be improved
if each subwoofer is located close to the
appropriate main speaker.
Note: Like all speakers, the proximity of room
boundaries affects the sound of a subwoofer.
Bass volume increases as more boundaries
come into proximity. The more boost gained from
the room, the lower the volume can be set and
the less hard the subwoofer has to work.
Once you have positioned your subwoofer, its
performance can be optimised using the Room EQ
function. This is described in Section 4.

Specyfikacje produktu

Marka: Bowers Wilkins
Kategoria: głośnik
Model: DB1D

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Bowers Wilkins DB1D, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik Bowers Wilkins

Bowers Wilkins

Bowers Wilkins DB1D Instrukcja

25 Września 2024
Bowers Wilkins

Bowers Wilkins CT8.2 LCR Instrukcja

23 Września 2024
Bowers Wilkins

Bowers Wilkins 2000 series Instrukcja

23 Września 2024
Bowers Wilkins

Bowers Wilkins Formation Flex Instrukcja

21 Września 2024
Bowers Wilkins

Bowers Wilkins 2003 Instrukcja

21 Września 2024
Bowers Wilkins

Bowers Wilkins CWM7.4 S2 Instrukcja

20 Września 2024
Bowers Wilkins

Bowers Wilkins CM1 S2 Instrukcja

18 Września 2024
Bowers Wilkins

Bowers Wilkins CCM7.3 S2 Instrukcja

17 Września 2024
Bowers Wilkins

Bowers Wilkins DM 305 Instrukcja

17 Września 2024
Bowers Wilkins

Bowers Wilkins DM602 S3 Instrukcja

17 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024