Instrukcja obsługi Botex PDB-4R 3P

Botex Rozłupnik PDB-4R 3P

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Botex PDB-4R 3P (1 stron) w kategorii Rozłupnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/1
Thomann GmbH
Hans-Thomann-Straße 1 • 96138 Burgebrach
Germany • www.thomann.de
DocID: 479178_16.03.2020
EN
PDB-4R 3P Power DMX Box
Features
1-in-4 power and DMX splitter in a 19" housing
Ideal combination for the distribution of power and
DMX signals on stage, in a rack or for xed installations
RDM-capable
Robust metal housing
DMX input: XLR 3-pin
4×DMX output: XLR 3-pin
Power input: Power Twist
4×current output: Power Twist
4A each, 16A maximum
Technical specications
Power supply: 230V ~ 50Hz
Fuse: 5mm×20mm,
1.0A, 250V, fast-acting
Power consumption: 5watt
Dimensions: 482×47×143mm
Weight: 2.3kg
Safety instructions
Intended use
This device is used to distribute power and DMX signals. Any other use
or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
Dangers for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that children
do not detach any small parts (e.g. knobs or the like) from the unit. They could
swallow the pieces and choke! Never let children unattended use electrical de-
vices.
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt,
and strong vibrations.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers. There are no user-serviceable parts inside.
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a
protective contact plug. Do not modify the mains cable or the plug. Failure to
do so could result in electric shock/death or re. If in doubt, seek advice from a
registered electrician.
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Handling the power cord
Do not place the device or speaker boxes or similar on the power cord and be
careful not to pinch it. Never tie a knot in the power cord or tie it with other
cables. Route the power cord so that no one steps on or trips over it. A damaged
power cord can cause a re or electric shock. Replace any broken cables.
Protecting the environment
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not
just dispose of these materials with your normal household waste, but make
sure that they are collected for recycling. Please follow the notes and markings
on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose
of your old device with your normal household waste. Dispose of this
product through an approved waste disposal rm or through your local
waste facility. Comply with the rules and regulations that apply in your country.
If in doubt, consult your local waste disposal facility.


Specyfikacje produktu

Marka: Botex
Kategoria: Rozłupnik
Model: PDB-4R 3P

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Botex PDB-4R 3P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Rozłupnik Botex

Botex

Botex DD-3-4U RJ45 Instrukcja

22 Września 2024
Botex

Botex DMX DD-2 RDM Instrukcja

20 Września 2024
Botex

Botex PDB-4R 3P Instrukcja

20 Września 2024
Botex

Botex PDB-4 5P Instrukcja

18 Września 2024

Instrukcje Rozłupnik

Najnowsze instrukcje dla Rozłupnik

Fujitsu

Fujitsu ASEG18KMTE Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASEG24KMTE Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASEH30KMTB Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASEH36KMTB Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASHH07KNCA Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASHH12KNCA Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASHH09KNCA Instrukcja

8 Października 2024
Fujitsu

Fujitsu ASEG07KPCE Instrukcja

8 Października 2024
Samsung

Samsung AM018FNNDCH Instrukcja

8 Października 2024
Samsung

Samsung AM018FNCDCH Instrukcja

8 Października 2024