Instrukcja obsługi Botex PDB-4 5P
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Botex PDB-4 5P (1 stron) w kategorii Rozłupnik. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
Thomann GmbH
Hans-Thomann-Straße 1 • 96138 Burgebrach
Germany • www.thomann.de
DocID: 469653_04.03.2020
EN
PDB-4 5P Power DMX Box
Features
1-in-4 power and DMX splitter
Ideal combination for the distribution of power and
DMX signals on stage, in a rig or for xed installations
Robust metal housing with two M10 threads on the
top
Compact and lightweight design
DMX input: XLR 5-pin
4×DMX output: XLR 5-pin
Power input: Power Twist
4×current output: Power Twist
Technical specications
Power supply: 230V ~ 50Hz
Power consumption: 5watt
Dimensions: 268×75×75mm
Weight: 1.26kg
Safety instructions
Intended use
This device is used to distribute power and DMX signals. Any other use
or use under other operating conditions is considered to be improper
and may result in personal injury or property damage. No liability will
be assumed for damages resulting from improper use.
Dangers for children
Ensure that plastic bags, packaging, etc. are disposed of properly and are not
within reach of babies and young children. Choking hazard! Ensure that children
do not detach any small parts (e.g. knobs or the like) from the unit. They could
swallow the pieces and choke! Never let children unattended use electrical de-
vices.
Operating conditions
This device has been designed for indoor use only. To prevent damage, never
expose the device to any liquid or moisture. Avoid direct sunlight, heavy dirt,
and strong vibrations.
Risk of re if the maximum current is exceeded
The device can power other devices via a lockable Power Twist output socket.
The current consumption of all serially connected other devices must not ex-
ceed 10A, otherwise you risk injuries and irreparable damages of the device.
Connect just so many devices to the output socket that the maximum current
consumption is not exceeded.
Ensure the correct dimensioning (wire cross section) of the used power cords of
all serially connected devices.
Electric shock caused by high voltages inside
Within the device there are areas where high voltages may be present. Never
remove any covers. There are no user-serviceable parts inside.
Electric shock caused by short-circuit
Always use proper ready-made insulated mains cabling (power cord) with a
protective contact plug. Do not modify the mains cable or the plug. Failure to
do so could result in electric shock/death or re. If in doubt, seek advice from a
registered electrician.
Power supply
Before connecting the device, ensure that the input voltage (AC outlet) matches
the voltage rating of the device and that the AC outlet is protected by a residual
current circuit breaker. Failure to do so could result in damage to the device and
possibly injure the user.
Unplug the device before electrical storms occur and when it is unused for long
periods of time to reduce the risk of electric shock or re.
Handling the power cord
Do not place the device or speaker boxes or similar on the power cord and be
careful not to pinch it. Never tie a knot in the power cord or tie it with other
cables. Route the power cord so that no one steps on or trips over it. A damaged
power cord can cause a re or electric shock. Replace any broken cables.
Protecting the environment
For the transport and protective packaging, environmentally friendly
materials have been chosen that can be supplied to normal recycling.
Ensure that plastic bags, packaging, etc. are properly disposed of. Do not
just dispose of these materials with your normal household waste, but
make sure that they are collected for recycling. Please follow the notes
and markings on the packaging.
This product is subject to the European Waste Electrical and Electronic
Equipment Directive (WEEE) in its currently valid version. Do not dispose
of your old device with your normal household waste. Dispose of this
product through an approved waste disposal rm or through your local
waste facility. Comply with the rules and regulations that apply in your
country. If in doubt, consult your local waste disposal facility.
Specyfikacje produktu
| Marka: | Botex |
| Kategoria: | Rozłupnik |
| Model: | PDB-4 5P |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Botex PDB-4 5P, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Rozłupnik Botex
22 Września 2024
20 Września 2024
20 Września 2024
18 Września 2024
Instrukcje Rozłupnik
- Rozłupnik Samsung
- Rozłupnik Fujitsu
- Rozłupnik StarTech.com
- Rozłupnik Behringer
- Rozłupnik Nedis
- Rozłupnik D-Link
- Rozłupnik ATen
- Rozłupnik APC
- Rozłupnik Hyundai
- Rozłupnik Manhattan
- Rozłupnik Tripp Lite
- Rozłupnik Akasa
- Rozłupnik Icy Box
- Rozłupnik Lindy
- Rozłupnik IFM
- Rozłupnik Digitus
- Rozłupnik Black Box
- Rozłupnik Zipper
- Rozłupnik CLUB3D
- Rozłupnik Rolls
- Rozłupnik Audio-Technica
- Rozłupnik Aluratek
- Rozłupnik Marmitek
- Rozłupnik Atlona
- Rozłupnik Gefen
- Rozłupnik Monacor
- Rozłupnik AMX
- Rozłupnik ACG
- Rozłupnik Audiovox
- Rozłupnik Konig
- Rozłupnik Furuno
- Rozłupnik WyreStorm
- Rozłupnik SIIG
- Rozłupnik Xantech
- Rozłupnik Televés
- Rozłupnik MuxLab
- Rozłupnik Comprehensive
- Rozłupnik Rose Electronics
- Rozłupnik SmartAVI
- Rozłupnik Rane
- Rozłupnik Klover
- Rozłupnik Omnitron Systems
- Rozłupnik Club 3D
Najnowsze instrukcje dla Rozłupnik
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024
8 Października 2024