Instrukcja obsługi Boss PW-3

Boss nieskategoryzowany PW-3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Boss PW-3 (1 stron) w kategorii nieskategoryzowany. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/1

Before using this unit, carefully read “USING THE UNIT SAFELY” and “IMPORTANT NOTES.” After reading, keep the document(s) including those sections where it will be available for immediate reference.

English

Main Features

5Unprecedented “RICH” wah sound, in addition to guitarists’ favorite “VINTAGE” mode.

5Compact space-saving wah pedal ideal for pedalboard.

5BOSS-traditional durability and reliability with robust aluminum diecast body.

5Dual indicator shows the ON/OFF status just at a glance.

Panel Descriptions

4 65 7

1. Pedal torque screw

You can change the pedal torque (the force or load required to pivot the

pedal) by adjusting the screw located on the right side of the unit.

* Use a hexagon socket screw key (5 mm) to adjust the screw.

* Take care not to overtighten the screw; doing so may damage the unit.

2. Pedal

Controls the wah tone.

Turning the wah on/o

Press down strongly on the toe of the pedal to switch the wah on/o.

* When you operate the unit, please be careful not to get your ngers pinched between the movable part and the panel. In

places where small children are present, make sure that an adult provides supervision and guidance.

* Do not insert your hand or ngers into any opening.

3. Dual indicator (both sides)

This indicator shows the wah on/o status and also provides a battery check function.

* When operating on battery power only, the unit’s indicator will become dim when battery power gets too low. Replace the

battery as soon as possible.

4. INPUT jack

Connect your electric guitar or electric bass here.

* The INPUT jack doubles as the power switch. Power to the unit is turned on when you plug into the INPUT jack; the power

is turned o when the cable is unplugged. Remove the plug when you’re not using the unit.

5. Tone switch

This lets you switch the tone of the wah.

RICH A new wah sound with a distinctively thick low range that cannot be obtained from a

conventional wah.

VINTAGE A wah sound that reproduces a vintage wah of the ‘60s.

6. DC IN jack

Accepts connection of an AC Adaptor (PSA series: sold separately). By using an AC Adaptor, you can play

without being concerned about how much battery power you have left.

* We recommend that you keep batteries installed in the unit even though you’ll be powering it with the AC adaptor. That

way, you’ll be able to continue a performance even if the cord of the AC adaptor gets accidently disconnected from the unit.

7. OUTPUT jack

Connect this to your amp or to another eect unit.

Connecting Your Equipment

Guitar amp Eector

Electric guitar

AC adaptor (PSA series:

sold separately)

OUTPUT INPUT

DC IN

* To prevent malfunction and equipment failure, always turn down the volume, and turn o all the units before making any

connections.

* Once the connections have been completed, turn on power to your various devices in the order specied. By turning on

devices in the wrong order, you risk causing malfunction and/or damage to speakers and other devices.

When powering up: Turn on the power to your guitar amp last.

When powering down: Turn o the power to your guitar amp rst.

This unit is equipped with a protection circuit. A brief interval (a few seconds) after turning the unit on is required before it will

operate normally.

* Before turning the unit on/o, always be sure to turn the volume down. Even with the volume turned down, you might hear

some sound when switching the unit on/o. However, this is normal and does not indicate a malfunction.

Changing the Battery

* If you handle batteries improperly, you risk explosion and uid leakage. Make sure that you carefully observe all of the items

related to battery that are listed in “USING THE UNIT SAFELY” and “IMPORTANT NOTES.”

1. Detach the battery cover.

2. Remove the battery from the battery compartment, and detach the

battery snap cord.

3. Attach the new battery to the battery snap.

* Make sure that the battery polarity (+/-) is correct.

4. Place the battery in the battery compartment, and close the battery

cover.

Main Specications

Power Supply

DC 9 V: Alkaline battery (9 V, 6LR61)/Carbon-zinc battery (9 V, 6F22),

AC Adaptor (sold separately)

* Rechargeable Ni-MH batteries cannot be used.

Current Draw 25 mA

Expected battery life under

continuous use

Alkaline: Approx. 40 hours

Carbon: Approx. 20 hours

* These gures will vary depending on the actual conditions of use.

Dimensions

80 (W) x 192 (D) x 58 (H) mm, 3-3/16 (W) x 7-9/16 (D) x 2-5/16 (H) inches

(Maximum height)

80 (W) x 192 (D) x 74 (H) mm, 3-3/16 (W) x 7-9/16 (D) x 2-15/16 (H) inches

Weight 800 g/1 lbs 13 oz

Accessories Owner’s Manual, Alkaline battery (9 V, 6LR61),

Sheets (for adjusting the force required to turn the wah on/o)

Option (sold separately) AC adaptor (PSA series)

* In the interest of product improvement, the specications and/or appearance of this unit are subject to change without

prior notice.

Lighter Heavier

BOSS PW-3: Wah Pedal

Owner’s Manual

The unit is designed so that you will not normally need to adjust the force required to turn the wah on/o.

If necessary, you can adjust the force as follows.

Ax the included sheet to either the right or

left rubber part located on the bottom surface

of the movable pedal.

Heavier

Using a at-blade screwdriver or similar tool,

remove the rubber part located at the right side

on the bottom surface of the movable pedal.

Lighter

Specyfikacje produktu

Marka:	Boss
Kategoria:	nieskategoryzowany
Model:	PW-3
Kolor produktu:	Czarny
Typ produktu:	Pedał ekspresji
Rodzaj zasilania:	AC, Battery
Wysokość produktu:	58 mm
Szerokość produktu:	80 mm
Głębokość produktu:	192 mm
Waga produktu:	800 g
Gniazdko wyjścia DC:	Tak
Liczba baterii:	1
Zużycie energii:	25 mA
Impedencja wyjścia:	1000 Ω
Napięcie baterii:	9 V
Najlepsze zastosowania:	Gitara
6,35 mm (1/4 cala) wejście:	1
Ilość efektów dźwiękowych:	1
6,35 mm (1/4 cala) wyjście:	1