Instrukcja obsługi Bogen V35
Bogen
Mengpaneel
V35
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen V35 (16 stron) w kategorii Mengpaneel. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/16
Power Vector Amplifiers
V35, V60, V100, V150, & V250 Models
Installation and Use Manual
© 2004 Bogen Communications, Inc.
All rights reserved.
Specifications subject to change without notice.
54-2072-01C 1202
Notice
Every effort was made to ensure that the information in this
guide was complete and accurate at the time of printing.
However, information is subject to change.
Important Safety Information
WARNING: To Reduce The Risk of Fire Or Electric Shock, Do
Not Expose This Apparatus To Rain Or Moisture.
Always follow these basic safety precautions when installing and
using the unit:
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus near water.
6. Clean only with dry cloth.
7. DO NOT block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8. Do not install near any heat sources such as radiators, heat
registers, stoves, or other apparatus (including amplifiers)
that produce heat.
9. Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding-type plug has two
blades and a third grounding prong. The wide blade, or the
third prong, are provided for your safety. If the provided plug
does not fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10. Protect the power cord from being walked on or pinched,
particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11. Only use attachments/accessories specified by the
manufacturer.
12. Unplug this apparatus during lightning storms or when
unused for long periods of time.
13. Refer all servicing to qualified service personnel. Servicing is
required when the apparatus has been damaged in any way,
such as power supply cord or plug is damaged, liquid has
been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not
operate normally, or has been dropped.
IMPORTANT
C A U TI O N: TO P RE V E N T T H E RI SK OF
ELECTRIC SHOCK, DO NOT REMOVE COVER
(OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
PERSONNEL.
The lightning flash with arrowhead
symbol, within an equilateral triangle, is
intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
The exclamation point within an
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in the literature
accompanying the appliance.
Contents
Page
PANEL DESCRIPTIONS..................................................................................................2-3
Power Vector Front Panel..................................................................................................................2
Power Vector Rear Panel ..................................................................................................................3
INSTALLATION ..................................................................................................................4
Package Contents ................................................................................................................................4
Ventilation and Mounting ..................................................................................................................4
Models V250 and V150 ................................................................................................................4
Models V 00, V60, and V351..........................................................................................................4
Rack Mounting ..............................................................................................................................4
Shelf/Table Mounting ....................................................................................................................4
Module Installation ..............................................................................................................................4
MODULES ............................................................................................................................5
Output Modules ..................................................................................................................................5
Functionality ....................................................................................................................................5
Input Modules ......................................................................................................................................5
Functionality ....................................................................................................................................5
Priorities ..........................................................................................................................................5
CONNECTIONS ..............................................................................................................6-8
Speakers ................................................................................................................................................6
Transformer-Coupled Speaker Connections ................................................................................6
4-Ohm Low-Impedance Speaker Connections ............................................................................6
COM and GND Terminals ............................................................................................................7
Remote Volume Control ....................................................................................................................7
Pre-EQ Output ....................................................................................................................................7
Signal-Processing Inserts ....................................................................................................................7
Mute Control........................................................................................................................................8
Bridging ..................................................................................................................................................8
System Expansion of Power Vector Amplifiers ............................................................................8
OPERATION ..................................................................................................................9- 01
Front Panel Controls & Indicators ..................................................................................................9
Input Volume Controls....................................................................................................................9
Signal / Clip Indicator ....................................................................................................................9
Base and Treble Controls ..............................................................................................................9
Master Volume Control ..................................................................................................................9
Average / Peak Switch & LED Output Meter ............................................................................9
Power Switch / Power Indicator ....................................................................................................9
Rear Panel Controls ........................................................................................................................ 01
Load Selector Switch .................................................................................................................. 01
Other Controls ................................................................................................................................ 01
Tone Control Bypass Switch........................................................................................................ 01
Low-Cut Switch ............................................................................................................................ 01
BLOCK DIAGRAM ............................................................................................................11
SPECIFICATIONS ............................................................................................................12
TROUBLESHOOTING .................................................................................................... 31
LIMITED WARRANTY ......................................................................................Back Cover
ACCESSORIES ..................................................................................................Back Cover
1
Specyfikacje produktu
| Marka: | Bogen |
| Kategoria: | Mengpaneel |
| Model: | V35 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Bogen V35, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Mengpaneel Bogen
31 Sierpnia 2024
4 Lipca 2024
Instrukcje Mengpaneel
- Mengpaneel Yamaha
- Mengpaneel Braun
- Mengpaneel Pioneer
- Mengpaneel Philips
- Mengpaneel Technics
- Mengpaneel JBL
- Mengpaneel Severin
- Mengpaneel Behringer
- Mengpaneel Allen & Heath
- Mengpaneel Black & Decker
- Mengpaneel Adler
- Mengpaneel Taurus
- Mengpaneel DAP-Audio
- Mengpaneel Denon
- Mengpaneel Kenwood
- Mengpaneel Bomann
- Mengpaneel Alesis
- Mengpaneel Auna
- Mengpaneel LD Systems
- Mengpaneel Fagor
- Mengpaneel Koenic
- Mengpaneel Korg
- Mengpaneel Wharfedale
- Mengpaneel Pyle
- Mengpaneel Numark
- Mengpaneel KitchenAid
- Mengpaneel Speco Technologies
- Mengpaneel Showtec
- Mengpaneel Samson
- Mengpaneel PreSonus
- Mengpaneel TriStar
- Mengpaneel Alto
- Mengpaneel Peavey
- Mengpaneel ART
- Mengpaneel RCF
- Mengpaneel Bifinett
- Mengpaneel Soundcraft
- Mengpaneel Clatronic
- Mengpaneel Inventum
- Mengpaneel Ariete
- Mengpaneel DBX
- Mengpaneel Sunbeam
- Mengpaneel Omnitronic
- Mengpaneel Mackie
- Mengpaneel Dynacord
- Mengpaneel Atlas Sound
- Mengpaneel Power Dynamics
- Mengpaneel Alecto
- Mengpaneel Kalorik
- Mengpaneel TOA
- Mengpaneel Monacor
- Mengpaneel HQ Power
- Mengpaneel Tascam
- Mengpaneel Reloop
- Mengpaneel Midas
- Mengpaneel Alpina
- Mengpaneel Allen-Heath
- Mengpaneel American Audio
- Mengpaneel Envivo
- Mengpaneel Pyle Pro
- Mengpaneel IDance
- Mengpaneel QTX
- Mengpaneel Swissonic
- Mengpaneel Team
- Mengpaneel Aviom
- Mengpaneel QSC
- Mengpaneel Roadstar
- Mengpaneel Apart
- Mengpaneel Turmix
- Mengpaneel Skytec
- Mengpaneel Home Electric
- Mengpaneel Monoprice
- Mengpaneel Solid State Logic
- Mengpaneel Adastra
- Mengpaneel Citronic
- Mengpaneel Warm Audio
- Mengpaneel Crown
- Mengpaneel Dateq
- Mengpaneel Santos
- Mengpaneel ANT
- Mengpaneel Rane
Najnowsze instrukcje dla Mengpaneel
20 Września 2024
20 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
19 Września 2024
18 Września 2024
18 Września 2024
18 Września 2024