Instrukcja obsługi Bogen CAM8Pro

Bogen Konsola miksująca CAM8Pro

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Bogen CAM8Pro (24 stron) w kategorii Konsola miksująca. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/24

CAM8PRO Mixer

Installation and Use Manual

54-2034-01D 1207

Notice

Every effort was made to ensure that the information in

this guide was complete and accurate at the time of print-

ing. However, this information is subject to change.

Important Safety Information

Always follow these basic safety precautions when

installing and using the unit:

1. Read all instructions before installing or operating the unit.

2. Follow all warnings and instructions marked on the

product.

DO NOT block or cover the ventilation slots and openings

They prevent the product from overheating. DO NOT

place the product in a separate enclosure or cabinet,

unless proper ventilation is provided.

4. Never spill liquid on the product or drop objects into the

ventilation slots and openings. Doing so may result in

serious damage to the components.

5. Repair or service must be performed by a factory

authorized repair facility.

DO NOT use the product near water or in a wet or damp

place (such as a wet basement).

7. DO NOT use extension cords. The product must be

installed within 6 feet of a grounded outlet receptacle.

8. DO NOT install telephone wiring during a lightning storm.

9. DO NOT install telephone jacks in a wet location unless

the jack is specifically designed for wet locations.

10. Never touch uninsulated wires or terminals, unless the

line has been disconnected at the paging or controller

interface.

11. Use caution when installing or modifying paging or

control lines.

Maintenance & Service

Caution

There are no user-serviceable parts within the unit.

Have all internal servicing performed by a qualified

technician. The warranty will become void if

repairs are made by other than the Bogen Service

Department or an authorized service agency.

Our Applications Engineering Department is available to

help you troubleshoot problems with your Bogen equip-

ment. Engineers are available from 8:30 AM to 6:00 PM,

Eastern Standard Time. Phone 1-800-999-2809.

Service can be obtained from our factory service depart-

ment. No merchandise may be returned for repair without

prior written authorization. Please contact our factory

service department at 1-800-999-2809 for a RA number.

Only merchandise specified in the return authorization

form can be returned to obtain warranty or non-warranty

repair. When shipping your unit, pack your system well

using the original shipping carton or a similar container

and filler material to prevent damage in transit. Send the

unit fully insured and prepaid via UPS or other responsi-

ble carrier.

Page 2

Contents

INTRODUCTION ......................................................................................................................................................4

Safety Instructions ........................................................................................................................................5

QUICK START ..........................................................................................................................................................6

PANEL DESCRIPTIONS........................................................................................................................................7-9

Front Panel ..................................................................................................................................................7

Rear Panel....................................................................................................................................................8

Helpful Hints ................................................................................................................................................9

INSTALLATION ..................................................................................................................................................10-11

OPERATION ......................................................................................................................................................12-18

Troubleshooting Gain Structure..................................................................................................................13

Recommended Input Wiring Methods ........................................................................................................14

Fine Tuning ................................................................................................................................................15

Compressor/Limiter ....................................................................................................................................16

Special Features Activation ........................................................................................................................17

Jumper Options ..........................................................................................................................................18

TROUBLESHOOTING TIPS ..................................................................................................................................19

GLOSSARY ............................................................................................................................................................20

TECHNICAL INFORMATION ............................................................................................................................21-22

Specifications..............................................................................................................................................21

Block Diagram ............................................................................................................................................22

Page 3