Instrukcja obsługi Blaupunkt XLf 220 A

Blaupunkt subwoofer XLf 220 A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt XLf 220 A (8 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
VELOCITY POWER
ACTIVE SUBWOOFER
XLf 220 A
Operating and Installation Instructions
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your installa-
tion carefully to avoid compromising performance reli-
ability of the system. Consult an authorized Blaupunkt
dealer for installation or reparation. Read the manual
carefully before operating the device for the rst time.
Safety Notes
Ensure to follow below safety notes during
installation and wiring connection : -
Installation and Connection Instructions
Voltage Supply
Integrated Fuse
The integrated fuse in the device protects the
output voltage and the entire electrical system in
case of malfunction. Do not replace damaged
fuse with higher current.
CAUTIONS
Switching On/O
This device will automatically turn on if a music
signal is detected. The device will also
automatically turn o if no music signal is received.
Remote Control
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time without
any notice.
1
Disconnect the negative terminal of the
battery. Refer to the safety notes of vehicle
manufacturer.
Ensure positions of the holes are nowhere
near the vehicle component to avoid any
damage during drilling.
Ensure cross section of the cable is no less
than 2.5mm if the positive and negative
cables are too long.
Incorrect installation may result in
malfunction of the device or the car sound
system.
Select a dry and well-ventilated location
to install the device.
The device must not be installed in overly
exposed location such on the rear shelf,
rear seat etc.
The installation location must be suitable for
screw holes and have stable ground support.
Use the supplied power extension cable to
connect to the positive battery terminal.
Firmly and carefully connect the ground lead
to a bare metal point on the vehicle chassis.
The control of the device should be a
two-channel control, either via the preamplier
outputs or the loudspeaker, output of the car
sound system.
A control solely via the right or left channel is
also possible since the low-frequency portion
of the music is generally identical on both
channels.
Gain adjustment :
Turn the gain knob to adjust
the volume to the desired
level.
Phase (0° ~ 180°)
Frequency (50Hz ~ 100 Hz)
Input Gain (200mV ~ 6V)
Remote Control
RCA Input (LCH, RCH)
High Input
Fuse (15A)
+12V Battery
Remote (Turn-on)
Ground (Chasis)
FUNCTIONS CONTROLLING DIAGRAM
2
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
1 2 3 5 6 78 9 10
4
SPECIFICATION
Speaker Size : 8”
Cone Composition : Aluminium
Magnet Type : Ferrite
Enclosure Housing Material : Aluminium
Enclosure Dimension (L x W x H) : 504 x 340 x 85mm
Enclosure Net Weight : 5kg
Amplier Technology : Class AB
Normal Output Power (RMS) : 220W
Max Output Power : 550W
Audio in Sensitivity : RCA input 82mV, Speaker
input 0.8V
Signal/Noise Ratio : 91dB
Output Impedance : Dual (2 ohms+2 ohms)
Frequency Response : 30Hz-150Hz
Low Pass Filter (LPF) : 50Hz-100Hz
Voltage : 14.4V (10V-16V)
Phase Switch : 0° /180°
Automatic On/O : High Level Only
Fuse Rating : 15A
Gain : 200mV ~ 6V
Thermal Short & Overload Protection Circuits :
Included
Remote Controller : Wired
Screws (Parker-Type) : 14 x (M5 x 18mm)
Screws (M-Type) : 4 x (M4 x 50mm)
Overall Net Weight : 9kg (Without accessories)
Dual Subwoofer
Amplier
Accessories


Specyfikacje produktu

Marka: Blaupunkt
Kategoria: subwoofer
Model: XLf 220 A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blaupunkt XLf 220 A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje subwoofer Blaupunkt

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024