Instrukcja obsługi Blaupunkt GBW801


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt GBW801 (2 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/2
Dear Customer,
Congratulations on your purchase of a BLAUPUNKT subwoofer, we are devoted to making our
musical reproduction the very best, and we are pleased you have chosen our product.
Through years of engineering expertise, hand craftsmanship, and critical testing procedures,
we have created a wide range of products that reproduce music with all the clarity and
richness you deserve.
For maximum performance we recommend you have your BLAUPUNKT product installed by
an authorized BLAUPUNKT dealer, as they have the knowledge, skills that will maximize the
performance of your subwoofer. Please read this manual, keep your receipt, and original
carton for possible future use.
If after reading this manual, you still have questions regarding your product, we recommend
that you see your nearest BLAUPUNKT dealer,
GBW801/101/120
SUBWOOFER
INSTRUCTION MANUAL
WARNING
Continuous, excessive exposure to sound pressure levels in excess of 85dB
can cause hearing loss. While BLAUPUNKT sound systems are capable of
producing sound pressure levels greater than 85dB, they are also designed
for enjoyment at reasonable levels. Please observe all local sound ordinances
while listening to your BLAUPUNKT sound system.
Need we say more! Use common sense.
Mounting:
NOTE: BLAUPUNKT strongly recommends that you operate your system at low
volume levels prior to the completed installation of your BLAUPUNKT subwoofers.
This will allow for a test of the subwoofers before securing it to its permanent
location.
CAUTION: Make sure that all subwoofers wiring is fully protected from cuts, tears
and possible wear. Any short circuits developing as a result could severely damage
the source unit or possible an amplifier. Make sure all subwoofers wires easily
reach the subwoofers terminal with no stress on the wire or connectors.
IMPORTANT: Never cut any metal that is an integral part of the vehicles safety or
structural support system. Again, If you are unsure, it is best to have the subwoof
-
ers professionally installed. It could be a lot less expensive in the long run. Never
sacrifice your safety for sound.
CHOOSING A LOCATION: It is always best to plan the complete installation prior to
attempting to install any product. The routing of wires, power connections and
mounting locations should be planned first. As with any car stereo installation, all
work performance should be checked thoroughly and carefully prior to the opera
-
tion of the system.
The placement of your BLAUPUNKT subwoofers within your vehicle will greatly
a ect the overall performance of your audio system. Every model of car is di er
-
ent, so installation into particular locations of the vehicle may not be possible
without modifications. Factory provided locations are usually.
BLAUPUNKT subwoofers are designed to fit in almost any factory location. Again, if
at all possible, it is recommended that you use a factory location. This applies
mostly to later model cars. For those earlier models that do not have factory
locations or are limited to just front subwoofer, it is recommended that you choose
a loca nt amount of air space.
If you allo nt amount of air space, the subwoofer may not produce
low frequencies very well. It is recommended to mount the subwoofer in the door
panels, kick panels, rear decks, etc. Ideally, the subwoofer should be mounted
where it will be in an enclosed airspace. This will allow for extended bass response.
Troubleshooting:
If you start having problems with distorted sound or loss performance after
installing your subs, you can follow the instructions below to try and locate what is
causing the problem.
1). If you have any distorted sound, loss of performance, or rattling from your subs,
check the connections running from your amplifier or other processor to the box.
You will also want to check the connections inside the box to make sure no wires
have become unhooked or are loose.
2). If the above does not solve the problem, check your enclosure thoroughly to
see if there are any leaks, cracks, or broken pieces. Any loss of structural integrity of
your enclosure can cause significant performance loss and distortion.
3). The next step you can take is to remove the subs and look for any burned wire
leads or separated components. You can normally smell something burning when
a sub blows or is going bad. Sometimes when you play subs to hard for too long,
they will start to heat up.
4). If none of the above steps solve the problem, you will want to start looking at
the other components in the vehicle. Start by checking all connections to and
from the box, amplifier, source unit, or any other processors you may be using. You
will need to reference to that particular manufacturer for any setting configura-
tions or troubleshooting.
Warning:
Investigate the layout of your automobile thoroughly before drill or cutting any
holes. Take care when you work near the gas tanks, gas lines, hydraulic lines, and
electrical wiring. Attach the system securely to the automobile to prevent damage,
particularly in the event of an accident. Do not mount the system so that the wire
connections are unprotected or are subject to pinching or damage from nearby
objects.
The +12V DC power wire must be fused at the battery positive terminal connec-
tion. Before making or breaking power connections at the system power terminals,
disconnect the +12V wire at the battery end. Confrm your radio/head unit or other
equipment is tur connectiong the input jacks and subwoofer termi-
nals.
If you need to replace the power fuse, replace it only with a fuse identical to that
supplied with the system. Using a fuse of di erent type or rating may result in
damage to this system.
Contents
Dimensions............................................................. 3
Features.................................................................... 4
Specifications......................................................... 4
Mounting................................................................. 5
Troubleshooting................................................... 6
Warning................................................................... 6
Front Cover Back Cover Page 1 Page 2
Page 2
Page 4 Page 5
Page 6
GBW801
GBW101
GBW120
Model GBW801 GBW101 GBW120
Fo (Hz) 46 36.2 32
Re (Ohms) 3.2 3.2 3.2
Qts 0.406 0.49 0.502
Qes 0.457 0.55 0.597
Qms 3.638 4.96 3.175
Cms (u M/N) 149.822 198.27 106.085
Vas (Ltr) 13.762 33.1 38.638
Mms (g) 44.7 97.6 130.5
Mmd (g) 42.4 93.9 124
No (%) 0.51 0.278 0.367
SPL (dB-1W/1M) 88 88 88
BL (TxM) 9.5 11.4 11.87
Krm (uOhms) 729.1 1367 1592
Erm 1.024 0.998 0.984
Kxm (mH) 26.7 31.8 33
Frequency Response (Hz) 45Hz~2KHz 35Hz~2KHz 32Hz~2KHz
Voice Coil (Diameter) 1.5" 2" 2"
Magnet Weight 32.2oz 47.8oz 47.8oz
Power Rating (RMS) 200Watts 300Watts 400Watts
Power Rating (Peak) 400Watts 600Watts 800Watts
Dimension:
Specifications:
High Quality Polypropylene Cone
High Density Foam Surround
High Temperature Aluminium Voice Coil
High Performance Strontium Ferrite Magnet
©2016 BLAUPUNKT. All Rights Reserved. This device complies with part 15 of the
FCC Rules. Operation is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must a ept any interference cc
received, including interference that my cause undesired operation. WARNING: This
product contains a chemical known to the State of California to cause cancer and
reproductive toxicity.
Mounting Depth: 5.08”
Overall Depth: 5.75”
Hole Diameter:
Ø0.157”
Model: GBW801
Model: GBW101
Model: GBW120
Page 3
Bolt Hole
Circle: Ø7.8”
Hole Diameter:
Ø0.197”
Bolt Hole
Circle: Ø9.76”
Hole Diameter:
Ø0.197”
Bolt Hole
Circle: Ø11.57”
Overall Diameter: Ø8.43”
Overall Diameter: Ø10.71”
Overall Diameter: Ø12.48”
Mounting Hole Diameter: Ø7.09”
Mounting Hole Diameter: Ø9.21”
Mounting Hole Diameter: Ø11.06”
Mounting Depth: 5.63”
Overall Depth: 6.42
Mounting Depth: 3.74”
Overall Depth: 4.33


Specyfikacje produktu

Marka: Blaupunkt
Kategoria: subwoofer
Model: GBW801

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blaupunkt GBW801, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje subwoofer Blaupunkt

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024