Instrukcja obsługi Blaupunkt XLf 200 AW

Blaupunkt subwoofer XLf 200 AW

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt XLf 200 AW (5 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 10 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/5
VELOCITY POWER
ACTIVE SUBWOOFER
XLf 200 AW
Operating and Installation Instructions
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your installa-
tion carefully to avoid compromising performance reli-
ability of the system. Consult an authorized Blaupunkt
dealer for installation or reparation. Read the manual
carefully before operating the device for the rst time.
Safety Notes
Ensure to follow below safety notes during installation
and wiring connection : -
Installation and Connection Instructions
Voltage Supply
Integrated Fuse
The integrated fuse in the device protects the output
voltage and the entire electrical system in case of
malfunction. Do not replace damaged fuse with higher
current.
Switching On/O
This device will automatically turn on if a music signal is
detected. The device will also automatically turn o if no
music signal is received.
CAUTIONS
Remote Control
Disclaimer
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages to property or life and whatsoever arising out
of or connected with the use or misuse of our products.
USA & CANADA: This product is not intended for sale in
the United States and Canada. If purchased in the U.S. or
Canada, this product is purchased on as-is basis. No
warranty, whether expressed or implied is provided in
the U.S. or Canada.
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time without
any notice.
1
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
Ensure cross section of the cable is no less than
2.5mm if the positive and negative cables are too
long.
Incorrect installation may result in malfunction of
the device or the car sound system.
Select a dry and well-ventilated location to install
the device.
The device must not be installed in overly exposed
location such on the rear shelf, rear seat etc.
The installation location must be suitable for screw
holes and have stable ground support.
Use the supplied power extension cable to connect
to the positive battery terminal.
Firmly and carefully connect the ground lead to a
bare metal point on the vehicle chassis.
The control of the device should be a two-channel
control, either via the preamplier outputs or the
loudspeaker, output of the car sound system.
A control solely via the right or left channel is also
possible since the low-frequency portion of the
music is generally identical on both channels.
GAIN
BASS BOOST
LPF
PHASE
1
2
3
4
WIRING DIAGRAM
3
Diagram 2 (Low Level Input -Speaker Input)
Use the supplied cable and wire harness to connect the outputs correctly by referring to Diagram 1 & Diagram 2.
Use only one of the audio inputs, otherwise, it may lead to audio interference.
1.
Diagram 1 (High Level Input -Speaker Input)
With control via the High Level Inputs, rst the speaker harness will need to be spliced the wire side of the splitter.
Then connect the white wire to the left (+), white/ black wire to the left(-) (it can be identied whether the left or
right channel via the attached harness label), grey to the right (+), and grey/black to the right (-) corresponding
vehicles wires, and nally plug the supplied harness into the High-Level Inputs/power matching connector on the
amplier panel of the subwoofer.
With control via the Low Level Inputs (also referred to as RCA Inputs), connect the blue colour remote wire from
XLf 200 AW to the vehicle’s head unit so XLf 200 AW will turn on and o with systems.


Specyfikacje produktu

Marka: Blaupunkt
Kategoria: subwoofer
Model: XLf 200 AW

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blaupunkt XLf 200 AW, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje subwoofer Blaupunkt

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024