Instrukcja obsługi Blaupunkt XLf 150 A

Blaupunkt subwoofer XLf 150 A

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Blaupunkt XLf 150 A (8 stron) w kategorii subwoofer. Ta instrukcja była pomocna dla 12 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
Operating and Installation Instructions
ACTIVE SUBWOOFER
XLf 150 A
Proper system planning is vital in order to maximize the
device’s performance and road safety. Plan your instal-
lation carefully to avoid compromising performance re-
liability of the system. Consult an authorized Blaupunkt
dealer for installation or reparation. Read the manual
carefully before operating the device for the rst time.
Safety Notes
Ensure to follow below safety notes during installation
and wiring connection : -
Installation and Connection Instructions
Intergrated Fuse
Switching On/O
Voltage Supply
1
Remote Control
Disclaimer
Recycling and Disposal
Do not dispose of your old unit in the
household trash!
Use the return and collection systems
available to dispose of the old device.
This manual may be updated from time to time without
any notice.
In no event shall Blaupunkt be liable for any direct,
indirect, punitive, incidental, special consequential
damages, to property or life, improper storage,
whatsoever arising out of or connected with the use
or misuse of our products.
USA & CANADA : Product not intended for sale in
the United States and Canada. If purchased in the
U.S. or Canada, this product is purchased as-is. No
warranty, express or implied is provided in the U.S.
and Canada.
INTRODUCTION
Disconnect the negative terminal of the battery.
Refer to the safety notes of vehicle manufacturer.
Ensure positions of the holes are nowhere near the
vehicle component to avoid any damage during
drilling.
Ensure cross section of the cable is no less than
2.5mm if the positive and negative cables are too
long.
Incorrect installation may result in malfunction of
the device or the car sound system.
Select a dry and well-ventilated location to install
the device.
The device must not be installed on the rear shelf,
rear seats or exposed locations.
The installation location must be suitable for
screw holes and have stable ground support.
The integrated fuse in the device protects the
output voltage and the entire electrical system in
case of malfunction. Do not replace damaged fuse
with higher current.
This device will automatically turn on if audio sig-
nal is detected. The device will also automatically
turn o if audio signal is received.
Use the supplied power extension cable to connect
to the positive battery terminal.
Firmly and carefully connect the ground lead to a
bare metal point on the vehicle chassis.
The control of the device should be a two-channel
control, either via the preamplier output of the
car sound system.
A control solely via the right or left channel is also
possible since the low-frequency portion of the
music is generally identical on both channels.
2
WIRING DIAGRAM
Use the supplied cable and wire harness to connect the outputs correctly by referring to Diagram 1 & Diagram 2.
Diagram 1 (High Level Input- Speaker Input)
Diagram 2 (Low Level Input - RCA Input)


Specyfikacje produktu

Marka: Blaupunkt
Kategoria: subwoofer
Model: XLf 150 A

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Blaupunkt XLf 150 A, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje subwoofer Blaupunkt

Instrukcje subwoofer

Najnowsze instrukcje dla subwoofer

JL Audio

JL Audio SGR-10TW3 Instrukcja

13 Października 2024
Teufel

Teufel T6 Instrukcja

13 Października 2024
Polk

Polk DB1040 Instrukcja

10 Października 2024
OSD Audio

OSD Audio NERO DUAL X8 Instrukcja

9 Października 2024
OSD Audio

OSD Audio NERO WSA Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ102 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ122 Instrukcja

9 Października 2024
Kicker

Kicker 43C84 Instrukcja

9 Października 2024
Kicker

Kicker 51CWQ124 Instrukcja

9 Października 2024
OSD Audio

OSD Audio FS12 Instrukcja

9 Października 2024