Instrukcja obsługi Black & Decker PCM355

Black & Decker Maszyna do piłowania PCM355

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker PCM355 (8 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/8

PCM355

DIAMETER OF WORK PIECE

WIDTH OF SPACE BLOCK

SPACE BLOCK

CUT-OFF END

BLOCK

FORWARD

8mm (0.3”)

FIG.1 FIG.2

FIG.3

FIG.4

FIG.8

FIG.5

FIG.7

FIG.9

FIG.6

ENGLISH

INTENDED USE

Your Porter-Cable chop saw has been designed for metal

cutting only. This tool is intended for consumer use only.

SAFETY INSTRUCTIONS

General power tool safety warnings

Warning! Read all safety warnings and all

instructions. Failure to follow all instructions may result in

electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference.

The term "power tool" in all of the warnings listed below

refers to your mains operated (corded) power tool or battery

operated (cordless) power tool.

1. Work area safety

a. Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

b. Do not operate power tools in explosive

atmospheres. Such as in the presence of ﬂammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

c. Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose

control.

2. Electrical safety

a. Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools. Unmodified

plugs and matching outlets will reduce risk of electric

shock.

b. Avoid body contact with earthed or grounded

surfaces such as pipes, radiators, ranges and

refrigerators.There is an increased risk of electric

shock if your body is earthed or grounded.

c. Do not expose power tools to rain or wet

conditions.Water entering a power tool will increase

the risk of electric shock.

d. Do not abuse the cord. Never use the cord for

carrying,pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving parts.

SPECIFICATION

PCM355-XE

TECHNICAL DATA

PCM355

2300W Chop Saw

POWER

VOLTAGE

FREQUENCY

NO-LOAD SPEED

MAX. DIAMETER

WEIGHT

/min

2300

230

3800

355

17.5

Damaged or entangled cords increase the risk of

electric shock.

e. When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord outdoor use reduces the risk of electric

shock.

f. If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

g. Recommendation for the use of a residual current

device with a rated residual current of 30 mA or

less.

3. Personal safety

a. Stay alert, watch what you are doing and use

common sense when operating a power tool. Do

not use a power tool while you are tired or under

the influence of drugs, alcohol or medication. A

moment of inattention while operating power tools may

result in serious personal injury.

b. Use personal protective equipment. Always wear

eye protection. Protective equipment such as dust

mask, non-skid safety shoes, hard hat, or hearing

protection used for appropriate conditions will reduce

personal injuries.

c. Prevent unintentional starting. Ensure the switch is

in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch

on invites accidents.

d. Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to a

rotating part of the power tool may result in personal

injury.

e. Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power

tool in unexpected situations.

f. Dress properly. Do not wear loose clothing or

jewellery. Keep your hair, clothing and gloves away

from moving parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g. If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of these devices

can reduce dust related hazards.

4. Power tool use and care

a. Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

b. Do not use the power tool if the switch does not turn it

on and off. Any power tool that cannot be controlled with

the switch is dangerous and must be repaired.

c. Disconnect the plug from the power source and/or

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	Maszyna do piłowania
Model:	PCM355
Kolor produktu:	Biały
Częstotliwość wejściowa AC:	50 - 60 Hz
Napięcie wejściowe AC:	100 - 240 V
Wysokość produktu:	130 mm
Szerokość produktu:	110 mm
Głębokość produktu:	37 mm
Waga produktu:	296 g
Certyfikaty:	FCC, IC, CE
Gniazdko wyjścia DC:	Tak
Wielkość pamięci flash:	16 MB
Pojemność pamięci wewnętrznej:	128 MB
Standardy komunikacyjne:	IEEE 802.3af,IEEE 802.3at
Maksymalna szybkość przesyłania danych:	300 Mbit/s
2,4 GHz:	Tak
5 GHz:	Tak
Modulacja:	16-QAM,64-QAM,BPSK,CCK,DBPSK,DQPSK,QPSK
Prędkość transferu danych przez Ethernet LAN:	10,100 Mbit/s
Ilość portów Ethernet LAN (RJ-45):	4
Umieszczenie:	Ściana
Wewnętrzny:	Tak
Obsługa PoE:	Tak
Napięcie operacyjne:	48 V
Zakres temperatur (eksploatacja):	0 - 40 °C
Zakres wilgotności względnej:	0 - 90 %
Syslog:	Tak
Zarządzanie przez stronę www:	Tak
Pobór mocy:	10.8 W
Szyfrowanie / bezpieczeństwo:	802.1x RADIUS,MD5,PEAP,SSID,WEP,WPA,WPA-AES,WPA-EAP,WPA-PSK,WPA-TKIP,WPA2
Diody LED:	Tak
Zakres temperatur (przechowywanie):	-20 - 60 °C
Dopuszczalna wilgotność względna:	0 - 90 %
Prąd wyjściowy:	0.8 A
Obsługa jakość serwisu (QoS):	Tak
Poziom wzmocnienia anteny (max):	5 dBi
Ilość anten:	4
Funkcje anteny:	Zintegrowana antena
Przycisk reset:	Tak
Typ przełącznika:	Zarządzany
Maksymalny transfer danych przez bezprzewody LAN:	300 Mbit/s
Liczba użytkowników:	100 użyt.
Ilość wsparć SSID:	16