Instrukcja obsługi Black & Decker LPP120

Black & Decker Maszyna do piłowania LPP120

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker LPP120 (52 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 5 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/52

Thank you for choosing BLACK+ ! DECKER

PLEASE READ BEFORE RETURNING THIS PRODUCT FOR ANY REASON.

If you have a question or experience a problem with your +BLACK DECKER purchase, go to http://www.blackanddecker.com/instantanswers

If you can’t find the answer or do not have access to the Internet, call 1- -544-6986 from 8 a.m. to 5 p.m. EST Mon. - Fri. to speak with an 800

agent. Please have the catalog number available when you call.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

VEA EL ESPANOL EN LA CONTRAPORTADA. INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA. ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

*Maximum initial battery pack voltage (measured without a workload) is 20 volts. Measured under a workload, nominal voltage is 18.

To register your new product, call 1-800-544-6986 or visit www.BlackandDecker.com/NewOwner

KEY INFORMATION YOU SHOULD KNOW:

READ INSTRUCTIONS THOROUGHLY

BEFORE OPERATING!

• DO NOT OVER-TENSION CHAIN. Refer to “Adjusting Chain

Tension” for proper method of tensioning chain.

• Retighten chain frequently during first two hours of use.

INSTRUCTION AMANUAL

20V MAX* LITHIUM POLE SAW

CATALOG NUMBER

LPP120

is recommended when working outdoors. Wear protective hair

covering to contain long hair.

• Use Safety Glasses. Always use face or dust mask if operation is

dusty.

• Use Right Appliance. Do not use pole saw for any job except that for

which it is intended.

• Do not grasp the exposed cutting blades or cutting edges when

picking up or holding the pole saw.

• Do Not Force Pole Saw. It will do the job better and with less

likelihood of a risk of injury at the rate for which it was designed.

• Do Not Overreach. Keep proper footing and balance at all times.

• Stay Alert. Watch what you are doing. Use common sense. Do not

operate pole saw when you are tired.

• Remove Battery From Pole saw. Remove the battery from the pole

saw when not in use, before servicing, when changing accessories

such as chains, and the like.

• Store Idle Pole saws Indoors. When not in use, pole saw should be

stored indoors in dry, and high or locked-up place out of reach of children.

• Maintain Pole saw With Care. Keep cutting edge sharp and clean for

best performance and to reduce the risk of injury. Follow instructions

for lubricating and changing accessories. Inspect pole saw cord

periodically, and if damaged, have it repaired by an authorized service

facility. Inspect extension cords periodically and replace if damaged.

Keep handles dry, clean, and free from oil and grease.

• Check Damaged Parts. Before further use of the pole saw, a

guard or other part that is damaged should be carefully checked

to determine that it will operate properly and perform its intended

function. Check for alignment of moving parts, binding of moving

parts, breakage of parts, mounting, and any other condition that may

affect its operation. A guard or other part that is damaged should be

properly repaired or replaced by an authorized service center unless

indicated elsewhere in this manual.

SAVE THESE INSTRUCTIONS

SPECIFIC SAFETY RULES

WARNING:

Some dust created by power sanding, sawing,

grinding, drilling, and other construction activities contains

chemicals known to cause cancer, birth defects or other reproductive

SAFETY GUIDELINES - DEFINITIONS

It is important for you to read and understand this manual. The

information it contains relates to protecting YOUR SAFETY and

PREVENTING PROBLEMS. The symbols below are used to help you

recognize this information.

DANGER: Indicates an imminently hazardous situation which,

if not avoided, will result in death or serious injury.

WARNING: Indicates a potentially hazardous situation which, if

not avoided, could result in death or serious injury.

CAUTION: Indicates a potentially hazardous situation which, if

not avoided, may result in minor or moderate injury.

CAUTION: Used without the safety alert symbol indicates a

potentially hazardous situation which, if not avoided, may result in

property damage.

IMPORTANT SAFETY RULES

WARNING: Read and understand all instructions. Failure to

follow all instructions listed below may result in electric shock, fire

and/or serious personal injury.

WARNING: When using electric gardening appliances, basic

safety precautions should always be followed to reduce the risk of fire,

electric shock, and personal injury, including the following:

WARNING:

For safe operation read and understand owner’s manual.

SAVE THESE INSTRUCTIONS

READ AND UNDERSTAND ALL INSTRUCTIONS.

• Don’tusepolesawindamporwetAvoid Dangerous Environment.

locations.

• Don’t Use In Rain.

• Keep Children Away. All visitors should be kept at a distance from

work area.

• Dress Properly. Do not wear loose clothing or jewelry. They can be

caught in moving parts. Use of rubber gloves and substantial footwear

comply with ANSI Z87

- safety hard hat

- ear mufflers or ear plug

- face or dust mask (if working in dusty areas)

• Wearheavylongpantsandboots.Do not wear loose fitting

clothing, short pants, jewelry of any kind, or go barefoot.

• Securelonghairsoitisaboveshoulderleveltoprevent

entanglement in any moving parts.

• Beforecutting,alwaysprovidethefollowing:

- clear work area

- secure footing

- planned retreat path from falling limbs

• Inspecttreebeforetrimming.Makeallowanceforbranchestofall

freely to the ground.

• DonotuseyourPoleSawtofellsaplings.

While Operating Pole Saw

DANGER: To reduce the risk of electric shock do no use on

wet surfaces. Do not expose to rain. Store indoors.

DANGER: Avoid Unintentional Starting – with battery

installed,don’tcarryappliancewithwithfingeronswitch.Besure

switch is off when installing battery.

• Stayalert.Usecommonsensewhileoperatingtheunit.

• Keepworkareaclean.Clutteredareasinviteinjuries.

• Alwaysremovebatteryfrompolesawwhenfinishedcuttingor

when left unattended.

• Keepchildren,animalsandbystandersatleast50ft.(15m)away

from Pole Saw. Only Pole Saw user should be in work area.

• DonotusethePoleSawtocutdowntrees.

• Donotgrasptheexposedsawchainwhenpickinguporholding

the pole saw.

• GripPoleSawsecurely-onehandonthepole,theotheronthe

handle.

• Keepfingerofftriggeruntilreadytomakecut.

• BeforestartingPoleSaw,makesurechainisnottouching

anything.

• KeepallpartsofbodyawayfromchainwhenPoleSawisrunning.

• DonotforcePoleSawwhilecutting.Applylightpressure.Itwilldo

the job better and safer at the rate for which it was intended.

• CarryPoleSawfromoneplacetoanother

harm. Some examples of these chemicals are:

 •leadfromlead-basedpaints,

 •crystallinesilicafrombricksandcementandothermasonryproducts,and

 •arsenicandchromiumfromchemically-treatedlumber.(CCA)

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, such as those

dust masks that are specially designed to filter out microscopic particles.

• Avoid prolonged contact with dust from power sanding, sawing,

grinding, drilling, and other construction activities. Wear protective

clothing and wash exposed areas with soap and water. Allowing dust

to get into your mouth, eyes, or lay on the skin may promote absorption

of harmful chemicals.

WARNING:

Use of this tool can generate and/or disburse

dust, which may cause serious and permanent respiratory or

other injury. Always use NIOSH/OSHA approved respiratory

protection appropriate for the dust exposure. Direct particles away

from face and body.

CAUTION: Wear appropriate personal hearing protection during

use. Under some conditions and duration of use, noise from this

product may contribute to hearing loss.

Before Operating Pole Saw

• For safe operation, read and understand all instructions

before using the Pole Saw. Follow all safety instructions.

Failure to follow all safety instructions listed below, can result

in serious personal injury.

• Watchwhatyouaredoing.Usecommonsense.Donotoperate

Pole Saw when you are tired.

• UsePoleSawforcuttingtreebranchesonly.DonotusePoleSaw

for purposes not intended. Do not use for cutting other items.

• Only well-instructed adults should operate Pole Saw. Never

allow children to operate.

• Do not allow children or untrained individuals to use this unit.

• WearthefollowingsafetygearwhenoperatingPoleSaw:

- heavy-duty gloves

- steel-toed safety footwear with non-skid soles

- safety glasses, goggles or face screen that are marked to

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	Maszyna do piłowania
Model:	LPP120

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker LPP120, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą

Twoje imię*

Twój email*

Napisz tutaj swoje pytanie

Instrukcje Maszyna do piłowania Black & Decker

Black & Decker KS650 Instrukcja

14 Października 2024

Black & Decker GKC3630L20 Instrukcja

14 Października 2024

Black & Decker KS550K Instrukcja

8 Października 2024

Black & Decker CS1004 Instrukcja

8 Października 2024

Black & Decker KS701PE Instrukcja

8 Października 2024

Black & Decker VP650 Instrukcja

7 Października 2024

Black & Decker KS2005EK Instrukcja

29 Września 2024

Black & Decker WM125 Instrukcja

27 Września 2024

Black & Decker BES702 Instrukcja

25 Września 2024

Black & Decker BECS2245 Instrukcja

22 Września 2024

Instrukcje Maszyna do piłowania

Najnowsze instrukcje dla Maszyna do piłowania

Husqvarna 455e Rancher Instrukcja

12 Stycznia 2025

Güde GSS 400 Instrukcja

12 Stycznia 2025

Makita DUC306PG2 Instrukcja

12 Stycznia 2025

HiKOKI C 6BU3 Instrukcja

11 Stycznia 2025

DEDRA DED7060 Instrukcja

11 Stycznia 2025

Einhell KGS 190 Instrukcja

11 Stycznia 2025

Sun Joe SWJ599E Instrukcja

11 Stycznia 2025

Einhell BT-MB 550 U Instrukcja

11 Stycznia 2025

Maruyama MCV51 Instrukcja

11 Stycznia 2025

Vonroc JS505DC Instrukcja

9 Stycznia 2025