Instrukcja obsługi Black & Decker KC9024

Black & Decker Maszyna do śrub KC9024

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker KC9024 (15 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 6 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/15
www.blackanddecker.eu
English 3
Türkçe 8
2
3
ENGLISH
Intended use
Your Black & Decker screwdriver has been designed
for screwdriving applications. This tool is intended for
consumer use only.
Safety instructions
General power tool safety warnings
Warning! Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions listed below may result in electric
shock, fi re and/or serious injury.
Save all warnings and instructions for future
reference. The term “power tool” in all of the warnings
listed below refers to your mains operated (corded) power
tool or battery operated (cordless) power tool.
1. Work area safety
a. Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of
fl ammable liquids, gases or dust. Power tools
create sparks which may ignite the dust or fumes.
c. Keep children and bystanders away while
operating a power tool. Distractions can cause
you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodifi ed plugs and matching outlets will
reduce risk of electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet
conditions. Water entering a power tool will
increase the risk of electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool.
Keep cord away from heat, oil, sharp edges
or moving parts. Damaged or entangled cords
increase the risk of electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of
a cord suitable for outdoor use reduces the risk of
electric shock.
f. If operating a power tool in a damp location is
unavoidable, use a residual current device (RCD)
protected supply. Use of an RCD reduces the risk
of electric shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do
not use a power tool while you are tired or under
the infl uence of drugs, alcohol or medication.
A moment of inattention while operating power tools
may result in serious personal injury.
b. Use personal protective equipment. Always wear
eye protection. Protective equipment such as dust
mask, non-skid safety shoes, hard hat, or hearing
protection used for appropriate conditions will reduce
personal injuries.
c. Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to power source and/or battery pack, picking up
or carrying the tool. Carrying power tools with your
fi nger on the switch or energising power tools that
have the switch on invites accidents.
d. Remove any adjusting key or wrench before
turning the power tool on. A wrench or a key left
attached to a rotating part of the power tool may
result in personal injury.
e. Do not overreach. Keep proper footing and
balance at all times. This enables better control of
the power tool in unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves
away from moving parts. Loose clothes, jewellery
or long hair can be caught in moving parts.
g. If devices are provided for the connection of
dust extraction and collection facilities, ensure
these are connected and properly used. Use of
dust collection can reduce dust-related hazards.
4. Power tool use and care
a. Do not force the power tool. Use the correct
power tool for your application. The correct power
tool will do the job better and safer at the rate for
which it was designed.
b. Do not use the power tool if the switch does not
turn it on and off. Any power tool that cannot be
controlled with the switch is dangerous and must be
repaired.
c. Disconnect the plug from the power source and/
or the battery pack from the power tool before
making any adjustments, changing accessories,
or storing power tools. Such preventive safety
measures reduce the risk of starting the power tool
accidentally.
d. Store idle power tools out of the reach of children
and do not allow persons unfamiliar with the
power tool or these instructions to operate the
power tool. Power tools are dangerous in the hands
of untrained users.
e. Maintain power tools. Check for misalignment or
binding of moving parts, breakage of parts and
any other condition that may affect the power
tools operation. If damaged, have the power tool
repaired before use. Many accidents are caused
by poorly maintained power tools.
f. Keep cutting tools sharp and clean. Properly
maintained cutting tools with sharp cutting edges
are less likely to bind and are easier to control.
g. Use the power tool, accessories and tool bits
etc., in accordance with these instructions,
taking into account the working conditions and
the work to be performed. Use of the power tool

Specyfikacje produktu

Marka: Black & Decker
Kategoria: Maszyna do śrub
Model: KC9024

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker KC9024, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Maszyna do śrub Black & Decker

Black & Decker

Black & Decker HP9012 Instrukcja

10 Października 2024
Black & Decker

Black & Decker BCRTA601 Instrukcja

8 Października 2024
Black & Decker

Black & Decker NM360 Instrukcja

22 Września 2024
Black & Decker

Black & Decker ISD600 Instrukcja

12 Września 2024
Black & Decker

Black & Decker 2038-220 Instrukcja

12 Września 2024
Black & Decker

Black & Decker HP9096 Instrukcja

10 Września 2024
Black & Decker

Black & Decker KC1036 Instrukcja

8 Września 2024
Black & Decker

Black & Decker KC3610 Instrukcja

6 Września 2024
Black & Decker

Black & Decker KC9072 Instrukcja

6 Września 2024
Black & Decker

Black & Decker KC4815 Instrukcja

5 Września 2024

Instrukcje Maszyna do śrub

Najnowsze instrukcje dla Maszyna do śrub

Fuxtec

Fuxtec FX-E1IW20 Instrukcja

13 Stycznia 2025
Hazet

Hazet 9012EL-SPC Instrukcja

12 Stycznia 2025
RYOBI

RYOBI One+ R18IW3 Instrukcja

11 Stycznia 2025
MSW

MSW -ACW700 Instrukcja

10 Stycznia 2025
RYOBI

RYOBI PCL250 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI PCL212 Instrukcja

4 Stycznia 2025
RYOBI

RYOBI One+ RSD18 Instrukcja

3 Stycznia 2025
Hazet

Hazet 9212SPC-010 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6004CT-3 Instrukcja

1 Stycznia 2025
Hazet

Hazet 6001-1.5/3 Instrukcja

1 Stycznia 2025