Instrukcja obsługi Black & Decker HP9096
Black & Decker
Maszyna do śrub
HP9096
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker HP9096 (55 stron) w kategorii Maszyna do śrub. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/55
1
English 3
Deutsch 7
Français 12
Italiano 16
Nederlands 20
Español 24
Português 28
Svenska 33
Norsk 37
Dansk 41
Suomi 45
∂ÏÏËÓÈη 49
2
DC
B
A
2
4
1
38
6
7
5
9
4
2
38
3
ENGLISH
Intended use
Your Black & Decker drill/screwdriver has been designed for
screwdriving applications and for drilling in wood, metal and
plastics. This tool is intended for consumer use only.
Your Black & Decker charger has been designed for charging
the battery in the tool with which it was supplied.
Safety instructions
◆Warning! When using battery-powered tools, basic
safety precautions, including the following, should always
be followed to reduce the risk of fire, leaking batteries,
personal injury and material damage.
◆Read all of this manual carefully before operating the tool.
◆Retain this manual for future reference.
Keep work area clean
Cluttered areas and benches can cause accidents.
Consider work area environment
Do not expose the tool to rain. Do not use the tool in damp or
wet conditions. Keep the work area well lit. Do not use the
tool where there is a risk of causing fire or explosion, e.g. in
the presence of flammable liquids and gases.
Keep children away
Do not allow children, visitors or animals to come near the
work area or to touch the tool.
Dress properly
Do not wear loose clothing or jewellery, as these can be
caught in moving parts. Preferably wear rubber gloves and
non-slip footwear when working outdoors. Wear protective
hair covering to keep long hair out of the way.
Personal protection
Always use safety glasses. Use a face or dust mask whenever
the operations may produce dust or flying particles.
Hearing protection should be worn.
Do not overreach
Keep proper footing and balance at all times.
Stay alert
Watch what you are doing. Use common sense.
Do not operate the tool when you are tired.
Secure workpiece
Use clamps or a vice to hold the workpiece. It is safer and it
frees both hands to operate the tool.
Connect dust extraction equipment
If devices are provided for the connection of dust extraction
and collection facilities, ensure that these are connected and
properly used.
Remove adjusting keys and wrenches
Always check that adjusting keys and wrenches are removed
from the tool before operating the tool.
Use appropriate tool
The intended use is described in this instruction manual.
Do not force small tools or attachments to do the job of a
heavy-duty tool.
The tool will do the job better and safer at the rate for which it
was intended. Do not force the tool.
Warning! The use of any accessory or attachment or performance
of any operation with this tool other than those recommended
in this instruction manual may present a risk of personal injury.
Check for damaged parts
Before use, carefully check the tool for damage. Check for
misalignment and seizure of moving parts, breakage of parts,
damage to guards and switches and any other conditions that
may affect its operation. Ensure that the tool will operate
properly and perform its intended function. Do not use the tool
if any part is damaged or defective. Do not use the tool if the
switch does not turn it on and off. Have any damaged or
defective parts repaired or replaced by an authorised repair
agent. Never attempt any repairs yourself.
Remove the battery
Where the design permits, remove the battery when the tool
is not in use, before changing any parts of the tool,
accessories or attachments and before servicing.
Avoid unintentional starting
Do not carry the tool with a finger on the on/off switch.
Be sure that the tool is switched off when inserting the
battery into the tool.
Do not abuse cord
Never carry the charger by its cord or pull it to disconnect from
the socket. Keep the cord away from heat, oil and sharp edges.
Store idle tools
When not in use, tools, batteries and chargers should be stored
in a dry, locked up or high place, out of reach of children.
Maintain tools with care
Keep cutting tools sharp and clean for better and safer
performance. Follow the instructions for maintenance and
changing accessories. Keep handles and switches dry,
clean and free from oil and grease.
Repairs
This tool complies with relevant safety requirements.
Repairs should only be carried out by qualified persons using
original spare parts; otherwise this may result in considerable
danger to the user.
Additional safety instructions for batteries and chargers
Batteries
◆Never attempt to open for any reason.
◆Do not expose the battery to water.
◆Do not store in locations where the temperature may
exceed 40 °C.
◆Charge only at ambient temperatures between 4 °C and
40 °C.
◆Charge only using the charger provided with the tool.
◆When disposing of batteries, follow the instructions given
in the section “Protecting the environment”.
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | Maszyna do śrub |
| Model: | HP9096 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker HP9096, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje Maszyna do śrub Black & Decker
10 Października 2024
8 Października 2024
22 Września 2024
12 Września 2024
12 Września 2024
10 Września 2024
6 Września 2024
5 Września 2024
31 Sierpnia 2024
22 Sierpnia 2024
Instrukcje Maszyna do śrub
- Maszyna do śrub AEG
- Maszyna do śrub Worx
- Maszyna do śrub Kawasaki
- Maszyna do śrub Milwaukee
- Maszyna do śrub Bosch
- Maszyna do śrub Yato
- Maszyna do śrub Parkside
- Maszyna do śrub Toolcraft
- Maszyna do śrub Festool
- Maszyna do śrub Panasonic
- Maszyna do śrub StarTech.com
- Maszyna do śrub Bavaria By Einhell
- Maszyna do śrub SW-Stahl
- Maszyna do śrub Stanley
- Maszyna do śrub Hazet
- Maszyna do śrub DeWalt
- Maszyna do śrub Einhell
- Maszyna do śrub Silverline
- Maszyna do śrub Makita
- Maszyna do śrub Ozito
- Maszyna do śrub RYOBI
- Maszyna do śrub Chicago Pneumatic
- Maszyna do śrub GO/ON
- Maszyna do śrub DEDRA
- Maszyna do śrub Hilti
- Maszyna do śrub Rodcraft
- Maszyna do śrub BaseTech
- Maszyna do śrub Dremel
- Maszyna do śrub Meec Tools
- Maszyna do śrub Güde
- Maszyna do śrub Bavaria
- Maszyna do śrub Carrera
- Maszyna do śrub Beta
- Maszyna do śrub Fein
- Maszyna do śrub Hitachi
- Maszyna do śrub Craftsman
- Maszyna do śrub Matrix
- Maszyna do śrub Fieldmann
- Maszyna do śrub PowerPlus
- Maszyna do śrub Alpha Tools
- Maszyna do śrub Vonroc
- Maszyna do śrub HiKOKI
- Maszyna do śrub Wiha
- Maszyna do śrub Porter-Cable
- Maszyna do śrub Metabo
- Maszyna do śrub Skil
- Maszyna do śrub Pansam
- Maszyna do śrub Toolland
- Maszyna do śrub Tacklife
- Maszyna do śrub Senco
- Maszyna do śrub Maktec
- Maszyna do śrub Steren
- Maszyna do śrub Power Craft
- Maszyna do śrub Kraftwerk
- Maszyna do śrub Kress
- Maszyna do śrub Urrea
- Maszyna do śrub Truper
- Maszyna do śrub Bruder Mannesmann
- Maszyna do śrub Meister Craft
- Maszyna do śrub Batavia
- Maszyna do śrub Elu
- Maszyna do śrub Sthor
- Maszyna do śrub Gedore
- Maszyna do śrub Cleco
- Maszyna do śrub Einhell Bavaria
- Maszyna do śrub Wera
- Maszyna do śrub Ingersoll Rand
- Maszyna do śrub Facom
- Maszyna do śrub TAURUS Titanium
Najnowsze instrukcje dla Maszyna do śrub
12 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024
9 Października 2024