Instrukcja obsługi Black & Decker FS1806CSL

Black & Decker Maszyna do piłowania FS1806CSL

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker FS1806CSL (56 stron) w kategorii Maszyna do piłowania. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF

Strona 1/56

VEA EL ESPAÑOL EN LA CONTRAPORTADA.

SAVE THIS MANUAL FOR FUTURE REFERENCE.

INSTRUCTIVO DE OPERACIÓN, CENTROS DE SERVICIO Y PÓLIZA DE GARANTÍA.

ADVERTENCIA: LÉASE ESTE INSTRUCTIVO ANTES DE USAR EL PRODUCTO.

INSTRUCTION MANUAL

CCO

OOR

RRD

DDL

LLE

EES

SSS

66-

--1

11/

//2

22”

”

””

”

””

(

((

(

((1

116

665

55m

mmm

mm)

)

))

)

))

aan

nnd

77-

--1

11/

//4

44”

”

””

”

””

(

((

(

((1

118

884

44m

mmm

mm)

)

))

)

)) C

CCI

IIR

RR C

CCU

UUL

LLA

AAR

RR S

SS A

AAW

WWS

BEFORE RETURNING THIS PRODUCT

FOR ANY REASON PLEASE CALL

1-800-544-6986

BEFORE YOU CALL, HAVE THE FOLLOWING INFORMATION AVAILABLE, CATALOG No., TYPE No., AND

DATE CODE . IN MOST CASES, A REPRESENTATIVE CAN RESOLVE THE PROBLEMBLACK & DECKER

OVER THE PHONE. IF YOU HAVE ASUGGESTION OR COMMENT, GIVE US ACALL. YOUR FEEDBACK

IS VITALTO BLACK & DECKER.

Catalog Numbers

without lasers

FS1806CS

THANK

HANK YOU

YOU FOR

FOR CHOOSING

CHOOSING F

FIREST

IRESTORM

ORM! G

! GO

WWW

WWW.F

.FIREST

IRESTORMT

ORMTOOLS

OOLS.

.COM

COM/P

/PRODUCT

RODUCTR

REGISTRA

EGISTRATION

TION

OREGISTER

YOUR NEW

NEW PRODUCT

PRODUCT.

Catalog Numbers

with lasers

FS1806CSL

FS1807CS

FS2406CS

FS2407CSL

90505019 FS Circ Saws 7/14/06 8:50 AM Page 1

GENERAL SAFETY RULES - FOR ALL BATTERY

OPERATED TOOLS

WARNING: READ AND UNDERSTAND ALL INSTRUCTIONS.

Failure to follow all instructions listed below, may result in electric shock, fire and/or

serious personal injury.

SAVE THESE INSTRUCTIONS

Work Area

• Keep your work area clean and well lit. Cluttered benches and dark areas invite

accidents.

• Do not operate power tools in explosive atmospheres, such as in the presence of

flammable liquids, gases, or dust. Power tools create sparks which may ignite the dust

or fumes.

• Keep bystanders, children, and visitors away while operating a power tool.

Distractions can cause you to lose control.

Electrical Safety

• Do not abuse the cord. Never use the cord to carry the tool. Keep cord away from

heat, oil, sharp edges or moving parts. Replace damaged cords immediately.

Damaged cords may create a fire.

• A battery operated tool with integral batteries or a separate battery pack must be

recharged only with the specified charger for the battery. A charger that may be

suitable for one type of battery may create a risk of fire when used with another battery.

• Use battery operated tool only with specifically designated battery pack. Use of any

other batteries may create a risk of fire.

Personal Safety

• Stay alert, watch what you are doing and use common sense when operating a

power tool. Do not use tool while tired or under the influence of drugs, alcohol, or

medication. A moment of inattention while operating power tools may result in serious

personal injury,

• Dress properly. Do not wear loose clothing or jewelry. Contain long hair. Keep your

hair, clothing, and gloves away from moving parts. Loose clothes, jewelry, or long hair

can be caught in moving parts.

• Avoid accidental starting. Be sure switch is in the locked or off position before

inserting battery pack. Carrying tools with your finger on the switch or inserting the

battery pack into a tool with the switch on invites accidents.

• Remove adjusting keys or wrenches before turning the tool on. A wrench or a key

that is left attached to a rotating part of the tool may result in personal injury.

• Do not overreach. Keep proper footing and balance at all times. Proper footing and

balance enable better control of the tool in unexpected situations.

• Use safety equipment. Always wear eye protection. Dust mask, non-skid safety

shoes, hard hat, or hearing protection must be used for appropriate conditions.

Tool Use and Care

• Use clamps or other practical way to secure and support the workpiece to a stable

platform. Holding the work by hand or against your body is unstable and may lead to loss

of control.

• Do not force tool. Use the correct tool for your application. The correct tool will do the

job better and safer at the rate for which it is designed.

• Do not use tool if switch does not turn it on or off. A tool that cannot be controlled with

the switch is dangerous and must be repaired.

• Disconnect battery pack from tool or place the switch in the locked or off position

before making any adjustments, changing accessories, or storing the tool. Such

preventive safety measures reduce the risk of starting the tool accidentally.

• Store idle tools out of reach of children and other untrained persons. Tools are

dangerous in the hands of untrained users.

• When battery pack is not in use, keep it away from other metal objects like: paper

clips, coins, keys, nails, screws or other small metal objects that can make a

connection from one terminal to another. Shorting the battery terminals together may

cause sparks, burns, or a fire.

• Maintain tools with care. Keep cutting tools sharp and clean. Properly maintained

90505019 FS Circ Saws 7/14/06 8:50 AM Page 2

tools, with sharp cutting edge are less likely to bind and are easier to control.

• Check for misalignment or binding of moving parts, breakage of parts, and any

other condition that may affect the tool’s operation. If damaged, have the tool

serviced before using. Many accidents are caused by poorly maintained tools.

• Use only accessories that are recommended by the manufacturer for your model.

Accessories that may be suitable for one tool may create a risk of injury when used on

another tool.

Service

• Tool service must be performed only by qualified repair personnel. Service or

maintenance performed by unqualified personnel may result in a risk of injury.

• When servicing a tool, use only identical replacement parts. Follow instructions in

the Maintenance section of this manual. Use of unauthorized parts or failure to follow

Maintenance Instructions may create a risk of shock or injury.

Specific Safety Rules

DANGER: Keep hands away from cutting area and blade. Keep your second

hand on auxiliary handle, or motor housing. If both hands are holding the saw, they

cannot be cut by the blade.

• Keep your body positioned to either side of the saw blade, but not in line with the

saw blade. KICKBACK could cause the saw to jump backwards. (See "Causes and

Operator Prevention of Kickback").

• Do not reach underneath the work. The guard cannot protect you from the blade below

the work.

• Check lower guard for proper closing before each use. Do not operate saw if lower

guard does not move freely and close instantly. Never clamp or tie the lower guard

into the open position. If saw is accidentally dropped, lower guard may be bent. Raise

the lower guard with the Retracting Lever and make sure it moves freely and does not

touch the blade or any other part, in all angles and depths of cut.

• Check the operation and condition of the lower guard spring. If the guard and the

spring are not operating properly, they must be serviced before use. Lower guard

may operate sluggishly due to damaged parts, gummy deposits, or a buildup of debris.

• Lower guard should be retracted manually only for special cuts such as "Pocket

Cuts" and "Compound Cuts". Raise the lower guard by Retracting Lever. As soon

as blade enters the material, lower guard must be released. For all other sawing, the

lower guard should operate automatically.

• Always observe that the lower guard is covering the blade before placing saw

down on bench or floor. An unprotected, coasting blade will cause the saw to walk

backwards, cutting whatever is in its path. Be aware of the time it takes for the blade to

stop after switch is released.

• NEVER hold piece being cut in your hands or across your leg. It is important to

support the work properly to minimize body exposure, blade binding, or loss of control.

• Hold tool by insulated gripping surfaces when performing an operation where the

cutting tool may contact hidden wiring. Contact with a “live” wire will also make

exposed metal parts of the tool "live" and shock the operator.

• When ripping, always use a rip fence or straight edge guide. This improves the

accuracy of the cut and reduces the chance for blade binding.

• Always use blades with correct size and shape (diamond vs. round) arbor holes.

Blades that do not match the mounting hardware of the saw will run eccentrically, causing

loss of control.

• Never use damaged or incorrect blade washers or bolts. The blade washers and bolt

were specially designed for your saw, for optimum performance and safety of operation.

Causes and Operator Prevention of Kickback

• Kickback is a sudden reaction to a pinched, bound or misaligned saw blade, causing an

uncontrolled saw to lift up and out of the workpiece toward the operator.

• When the blade is pinched or bound tightly by the kerf closing down, the blade stalls and

the motor reaction drives the unit rapidly back toward the operator.

• If the blade becomes twisted or misaligned in the cut, the teeth at the back edge of the

blade can dig into the top surface of the wood causing the blade to climb out of the kerf

and jump back toward the operator.

• Kickback is the result of tool misuse and/or incorrect operating procedures or conditions

and can be avoided by taking proper precautions as given below:

90505019 FS Circ Saws 7/14/06 8:50 AM Page 3

Specyfikacje produktu

Marka:	Black & Decker
Kategoria:	Maszyna do piłowania
Model:	FS1806CSL
Kolor produktu:	Black,Green
Wysokość produktu:	13 mm
Szerokość produktu:	93 mm
Głębokość produktu:	32 mm
Waga produktu:	41 g
Ilość na paczkę:	1 szt.
Pasmo częstotliwości:	2.4 GHz
Obsługiwane systemy operacyjne Windows:	Tak
Obsługiwane systemy operacyjne Mac:	Tak
Wi-Fi:	Tak
Standardy Wi- Fi:	802.11b,802.11g,Wi-Fi 4 (802.11n)
Skrócona instrukcja obsługi:	Tak
Liczba portów USB 2.0:	1
Obsługiwany systemy operacyjne Linux:	Tak
Szyfrowanie / bezpieczeństwo:	128-bit WEP,WPA2
Pojemność:	8 GB
Obsługa funkcji Plug & Play:	Tak
Zasilane prze USB:	Tak
USB:	Tak
Maksymalny zakres wewnętrzny (pomieszczenie):	50 m
Typ karty flesza:	SD
Adapter pamięci w zestawie:	USB
Pobór mocy (zapis):	500 mA
Pobór mocy (odczyt):	500 mA