Instrukcja obsługi Black & Decker BPXH2000


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker BPXH2000 (19 stron) w kategorii Opalarka. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/19
BPXH2000
www.blackanddecker.ae
ENGLISH
2
A B
C D
1
2
3
4
Intended Use
Your Black & Decker heat gun has been designed for
various heating applications (eg. Paint stripping)
General safety rules
Warning! Read all instructions. Failure to follow all
instructions listed below may result in electric shock, fire
and/or serious injury. The term “power tool” in all of the
warnings listed below refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
SAVE THESE INSTRUCTIONS.
1. Work area
a. Keep work area clean and well lit. Cluttered and dark
areas invite accidents.
b. Do not operate power tools in explosive
atmospheres, such as in the presence of flammable
liquids, gases or dust. Power tools create sparks which
may ignite the dust or fumes.
c. Keep children and bystanders away while operating
a power tool. Distractions can cause you to lose control.
2. Electrical safety
a. Power tool plugs must match the outlet. Never
modify the plug in any way. Do not use any adapter
plugs with earthed (grounded) power tools.
Unmodified plugs and matching outlets will reduce risk of
electric shock.
b. Avoid body contact with earthed or grounded
surfaces such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
c. Do not expose power tools to rain or wet conditions.
Water entering a power tool will increase the risk of
electric shock.
d. Do not abuse the cord. Never use the cord for
carrying, pulling or unplugging the power tool. Keep
cord away from heat, oil, sharp edges or moving
parts. Damaged or entangled cords increase the risk of
electric shock.
e. When operating a power tool outdoors, use an
extension cord suitable for outdoor use. Use of a
cord suitable for outdoor use reduces the risk of electric
shock.
3. Personal safety
a. Stay alert, watch what you are doing and use
common sense when operating a power tool. Do not
use a power tool while you are tired or under the
influence of drugs, alcohol or medication. A moment
of inattention while operating power tools may result in
serious personal injury.
b. Use safety equipment. Always wear eye protection.
Safety equipment such as dust mask, non-skid safety
shoes, hard hat, or hearing protection used for
appropriate conditions will reduce personal injuries.
c. Avoid accidental starting. Ensure the switch is in the
off position before plugging in. Carrying power tools
with your finger on the switch or plugging in power tools
that have the switch on invites accidents.
d. Remove any adjusting key or wrench before turning
the power tool on. A wrench or a key left attached to a
rotating part of the power tool may result in personal
injury.
e. Do not overreach. Keep proper footing and balance at
all times. This enables better control of the power toolin
unexpected situations.
f. Dress properly. Do not wear loose clothing or
jewellery. Keep your hair, clothing and gloves away
from moving parts. Loose clothes, jewellery or long hair
can be caught in moving parts.
g. If devices are provided for the connection of dust
extraction and collection facilities, ensure these are
connected and properly used. Use of these devices
can reduce dust related hazards.
h. Use clamps or another practical way to secure and
support the workpiece to a stable platform. Holding
the work by hand or against your body leaves it unstable
and may lead to loss of control. Before drilling into walls,
floors or ceilings check for the location of wiring and
pipes. Avoid touching the tip of a drill bit just after drilling,
as it may be hot.
4. Power tool use and care
a. Do not force the power tool. Use the correct power
tool for your application. The correct power tool will do
the job better and safer at the rate for which it was
designed
b. Do not use the power tool if the switch does not turn
it on and off. Any power tool that cannot be controlled
with the switch is dangerous and must be repaired.
3
ENGLISH


Specyfikacje produktu

Marka: Black & Decker
Kategoria: Opalarka
Model: BPXH2000
Kolor produktu: Czarny
Położenie urządzenia: Wolnostojący
Częstotliwość wejściowa AC: 50 - 60 Hz
Napięcie wejściowe AC: 220 - 240 V
Wysokość produktu: 552 mm
Szerokość produktu: 384 mm
Głębokość produktu: 395 mm
Waga produktu: 10000 g
Szerokość opakowania: 456 mm
Wysokość opakowania: 556 mm
Głębokość opakowania: 489 mm
Poziom hałasu: 0 dB
Klasa emisji hałasu: A
Obciążenie: 55 W
Klasa wydajności energetycznej: F
Skala efektywności energetycznej: Od A do G
Certyfikaty: ETL, GS, CB, EMC
Zawias drzwiczek: Prawy
Waga wraz z opakowaniem: 12500 g
Typ lamp: LED
Roczne zużycie energii: 83 kWh
Zużycie energii: 0.285 kWh/24h
Pojemność lodówki netto: 24 l
Światło wewnątrz lodówki: Tak
Liczba półek w lodówce: 1
Pojemność lodówki brutto: 30 l
Tryb klimatu: N-T
Termostat: Tak

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Black & Decker BPXH2000, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Opalarka Black & Decker

Instrukcje Opalarka

Najnowsze instrukcje dla Opalarka

Rapid

Rapid R2000 Instrukcja

4 Października 2024
Wagner

Wagner Furno 550 18V Instrukcja

4 Października 2024
Parkside

Parkside PHLG 2000 B1 Instrukcja

3 Października 2024
Ferm

Ferm FHG-2000 Instrukcja

2 Października 2024
Holzmann

Holzmann HLP 2000 Instrukcja

29 Września 2024
Metabo

Metabo RH18DA Instrukcja

29 Września 2024
PowerPlus

PowerPlus POWE80042 Instrukcja

29 Września 2024
PowerPlus

PowerPlus POWE80040 Instrukcja

29 Września 2024
Meec Tools

Meec Tools 051-010 Instrukcja

29 Września 2024