Instrukcja obsługi Black & Decker 2038
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Black & Decker 2038 (9 stron) w kategorii maszyna śrubowa. Ta instrukcja była pomocna dla 14 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/9
Double Insulated
Drywall Screwdrivers
Instruction
manual
The Model and Serial No. plate is located on the main
housing of the tool. Record these numbers in the
spaces below and retain for future reference.
Model No. ______________________________________
Type ___________________________________________
Serial No. _______________________________________
IMPORTANT
Please make certain that the person who
is to use this equipment carefully reads
and understands these instructions before
starting operations.
Part No. 901014 (012)
ESPAÑOL: PÁGINA 9
FRANÇAISE : PAGE 19
To learn more about Porter-Cable
visit our website at:
http://www.porter-cable.com
Copyright © 2001 PORTER-CABLE Corporation
MODEL 2640
(10 Ft. Cord)
MODEL 2650
(50 Ft. Cord)
2
IMPORTANT SAFETY INSTRUCTIONS
WARNING: When using electric tools, basic safety precautions should
always be followed to reduce the risk of fire, electric shock and personal injury,
including the following:
WARNING: SOME DUST CREATED BY POWER SANDING, SAWING,
GRINDING, DRILLING, AND OTHER CONSTRUCTION ACTIVITIES
contains chemicals known to cause cancer, birth defects or other
reproductive harm. Some examples of these chemicals are:
· lead from lead-based paints,
· crystalline silica from bricks and cement and other masonry products, and
· arsenic and chromium from chemically-treated lumber.
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, such as those dust
masks that are specially designed to filter out microscopic particles.
READ AND FOLLOW ALL INSTRUCTIONS.
There are certain applications for which this tool was designed. Porter-Cable
strongly recommends that this tool NOT be modified and/or used for any
application other than for which it was designed. If you have any questions
relative to its application DO NOT use the tool until you have written Porter-
Cable and we have advised you.
Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
Jackson, TN 38305
POLARIZED PLUGS: To reduce the risk of electric shock, this equipment has
a polarized plug (one blade is wider than the other). This plug will fit in a
polarized outlet only one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. Do not change the plug in any way.
1. KEEP WORK AREA CLEAN. Cluttered areas and benches invite injuries.
2. AVOID DANGEROUS ENVIRONMENT. Don’t expose power tools to rain.
Don’t use power tools in damp or wet locations. Keep area well lit. Avoid
chemical or corrosive environment. Do not use tool in presence of flammable
liquids or gases.
3. GUARD AGAINST ELECTRIC SHOCK. Prevent body contact with
grounded surfaces. For example: pipes, radiators, ranges, refrigerator
enclosures.
4. KEEP CHILDREN AWAY. Do not let visitors contact tool or extension
cord. All visitors should be kept away from work area.
5. STORE IDLE TOOLS. When not in use, tools should be stored in dry, and
high or locked-up place – out of reach of children.
6. DON’T FORCE TOOL. It will do the job better and safer at the rate for
which it was intended.
7. USE RIGHT TOOL. Don’t force small tool or attachment to do the job of
a heavy duty tool. Don’t use tool for purpose not intended – for example – do
not use a circular saw for cutting tree limbs or logs.
8. DRESS PROPERLY. Do not wear loose clothing or jewelry. Loose
clothing, draw strings and jewelry can be caught in moving parts. Rubber
gloves and non-skid footwear are recommended when working outdoors.
Wear protective hair covering to contain long hair.
3
9. USE SAFETY GLASSES. Wear safety glasses or goggles while operating
power tools. Also face or dust mask if operation creates dust. All persons in
the area where power tools are being operated should also wear safety
glasses and face or dust mask.
10. DON’T ABUSE CORD. Never carry tool by cord or yank it to disconnect
from receptacle. Keep cord from heat, oil, and sharp edges. Have damaged
or worn power cord and strain reliever replaced immediately. DO NOT
ATTEMPT TO REPAIR POWER CORD.
11. SECURE WORK. Use clamps or a vise to hold work. It’s safer than using
your hand and it frees both hands to operate tool.
12. DON’T OVERREACH. Keep proper footing and balance at all times.
13. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean for better
and safer performance. Follow instructions for lubricating and changing
accessories. Inspect tool cords periodically and if damaged, have repaired by
authorized service facility. Inspect extension cords periodically and replace if
damaged. Have all worn, broken or lost parts replaced immediately. Keep
handles dry, clean and free from oil and grease.
14. DISCONNECT TOOLS when not in use, before servicing, and when
changing accessories such as blades, bits, cutters, etc.
15. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit of checking
to see that keys and adjusting wrenches are removed from the tool before
turning it on.
16. AVOID UNINTENTIONAL STARTING. Do not carry a plugged-in tool with
finger on switch. Be sure switch is off when plugging in. Keep hands, body and
clothing clear of blades, bits, cutters, etc. when plugging in the tool.
17. OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use
only extension cords marked “Suitable for use with outdoor appliances – store
indoors when not in use.”
18. STAY ALERT. Watch what you are doing. Use common sense. Do not
operate tool when you are tired or while under the influence of medication,
alcohol or drugs.
19. CHECK DAMAGED PARTS. Before further use of the tool, a guard or
other part that is damaged should be carefully checked to determine that it
will operate properly and perform its intended function. Check for alignment
of moving parts, binding of moving parts, breakage of parts, mounting, and
any other conditions that may affect its operation. A guard or other part that
is damaged should be properly repaired or replaced by an authorized service
center unless otherwise indicated elsewhere in this instruction manual. Have
defective switches replaced by authorized service center. Do not use tool if
switch does not turn it on and off.
20. WEAR EAR PROTECTION to safeguard against possible hearing loss.
SAVE THESE INSTRUCTIONS
REPLACEMENT PARTS
When servicing use only identical replacement parts.
ADDITIONAL SAFETY RULES FOR SCREWDRIVERS
1. VERIFY direction of rotation of screwdriver is correct for operation to be
performed before starting tool.
2. DO NOT attempt to change direction of rotation while switch is “ON”. To
do so may damage interlock feature built into switch. Be sure switch is “OFF”
and motor has completely stopped.
Specyfikacje produktu
| Marka: | Black & Decker |
| Kategoria: | maszyna śrubowa |
| Model: | 2038 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Black & Decker 2038, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje maszyna śrubowa Black & Decker
29 Czerwca 2024
2 Czerwca 2024
Instrukcje maszyna śrubowa
- maszyna śrubowa Worx
- maszyna śrubowa Milwaukee
- maszyna śrubowa Bosch
- maszyna śrubowa Parkside
- maszyna śrubowa Hazet
- maszyna śrubowa DeWalt
- maszyna śrubowa Einhell
- maszyna śrubowa Makita
- maszyna śrubowa RYOBI
- maszyna śrubowa DEDRA
- maszyna śrubowa Meec Tools
- maszyna śrubowa Güde
- maszyna śrubowa Airpress
- maszyna śrubowa Metabo
- maszyna śrubowa Skil
- maszyna śrubowa Pansam
- maszyna śrubowa Kress
Najnowsze instrukcje dla maszyna śrubowa
6 Października 2024
1 Października 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024
8 Lipca 2024