Instrukcja obsługi Behringer SD251-BT


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Behringer SD251-BT (3 stron) w kategorii Słuchawki. Ta instrukcja była pomocna dla 9 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/3
Quick Start Guide
V 1.0
! Important Safety Information
1. Read these instructions.
2. Keep these instructions.
3. Heed all warnings.
4. Follow all instructions.
5. Do not use this apparatus
near water.
6. Clean only with dry cloth.
7. Do not throw this product in the
re, to avoid explosion.
8. Do not expose this product to
bright sunshine for a long time.
9. Do not disassemble or modify
this product.
10. Please store this product in a
clean and dry environment.
11. Charge it once a month
(minimum).
12. Do not leave unattended
while charging.
13. WARNING! Choking and
Swallowing Hazard. Keep the
product safely out of reach of
children and pets. The small
size presents a choking and
swallowing hazard. Failure to
follow instructions may lead to
permanent damage or death.
14. WARNING! To prevent possible
hearing damage, do not listen
at high volume levels for long
periods.
Accessories List
SD251-BT earphones x 1 pair
Zipper case
Silicone sleeves in 3 sizes
USB charging cable
Cleaning tool
This quick start guide
Features
Professional studio-grade
monitoring earphones
Dynamic micro-driver provides
wide frequency response (20
Hz - 20 kHz) delivering full bass
and detailed highs
Bluetooth* 5.0 technology for
exceptional sound quality with
up to 33 ft (10 m) of wireless
freedom
Built-in CVC 8.0 isolates the
user's voice from surrounding
clutter for clear phone
conversation
Sound-isolating design blocks
outside noise for detailed
musical experience
Secure, over-the-ear cable
design ensures in-ear stability
and comfort
360-degree rotating
gold-plated MMCX lock-snap
connector for exibility and
versatile connectivit y options
Bluetooth communication
cable for seamless phone calls
and eortless music controls
Up to 7-hours of battery life -
USB charging cable included
Zipper case included to enjoy
your music on-the-go
Includes foam and silicone
ear-plugs in 3 sizes to ensure
a perfect t
Controls
Battery pod
USB charging port
Charging/Bluetooth LED
and microphone
Control buttons
Getting Started
Charging
Before use, please read this
quick start guide carefully and
keep it in a safe place.
Please fully charge the earbuds
before use.
Do not leave unattended
while charging.
Please regularly charge the
earbuds if you do not use them
for a long time (more than
3 months).
Please use the supplied charger
cable only.
There is built-in easy voice
prompt for low battery that
informs the user to recharge
the device.
WARNING: Avoid the following
Replacement of a battery that
can defeat a safeguard.
Disposal of a battery into re
or a hot oven, or mechanically
crushing or cutting of a battery,
that can result in an explosion.
Leaving a battery in an
extremely high temperature
surrounding environment
that can result in an explosion
or the leakage of ammable
liquid or gas.
A battery subjected to
extremely low air pressure
that may result in an explosion
or the
leakage ofammable liquid
or gas.
SD251-BT
Studio Monitoring Earphones with
Bluetooth* Connectivity
LEGAL DISCLAIMER
Music Tribe accepts no liability for any loss which may be suered by any person
who relies either wholly or in part upon any description, photograph, or statement
contained herein. Technical specications, appearances and other information
are subject to change without notice. All trademarks are the property of their
respective owners. Midas, Klark Teknik, Lab Gruppen, Lake, Tannoy, Turbosound,
TC Electronic, TC Helicon, Behringer, Bugera, Oberheim, Auratone and Coolaudio
are trademarks or registered trademarks of Music Tribe Global Brands Ltd. © Music
Tribe Global Brands Ltd. 2021 All rights reserved.
LIMITED WARRANTY
For the applicable warranty terms and conditions and additional information
regarding Music Tribe’s Limited Warranty, please see complete details online at
musictribe.com/warranty.
Wearing, inserting and removing the earphones
1. These earphones should be worn with the cables routed over the ear.
Then, the cables can be run to your monitoring system either in front or
behind , similar to this illustration:
2. Insert each earphone so makes a tight seal in the ear canal. A good seal with
the ear canal is necessary for optimum sound quality, especially for bass
frequencies.
3. If you notice a loss of bass frequencies, gently push the earphone deeper
into the ear canal to produce a better seal. If this adjustment does not
improve the bass response, you can also switch to a dierent sleeve.
WARNING: Avoid pushing the earphone in beyond the ear canal.
4. To remove the earphones, rmly hold each earphone’s outer case between
your nger and thumb and twist gently.
Choosing, installing and changing sleeves
SD Series earphones come with a selection of soft sleeves in three sizes,
from small to large
WARNING: Always make sure to protect your ears by muting or lowering your
monitoring system’s volume down all the way before inserting the earphones.
1. Choose an earphone sleeve with the best t and the best seal to isolate your
earphone mix from outside sounds.
2. Slide the sleeve onto each earphone’s sound nozzle. Apply light pressure,
and if necessary rotate the sleeve as you go until secure.
3. Make sure the sleeve completely covers the nozzle and the ared barb.
4. Try inserting the earphone into your ear canal to test the t.
5. If thet is too loose or tight, twist and pull to remove the sleeve from the
nozzle and replace with a sleeve in the next appropriate size.
NOTE: If the barb or nozzle is exposed beneath the sleeve, the sleeve is not
installed properly. Sleeves that do not t securely over the nozzle and barb
should be replaced.
Bluetooth pairing
You will hear voice prompt for pairing after power on. Please refer to function
map table for other functions.
Bluetooth functions for Bluetooth-enabled earphones can be accessed from the
controller pod embedded in the earphone cable:
Power ON / OFF
Power On Press center key for 3 seconds
Power O Press center key for 3 seconds
Music Controls
Play the Track Press center key once
Pause the Track Press center key once
Volume Up by 7% Press "+" key
Volume Down by 7% Press "-" key
Next Track Long Press "+" key
Previous Track Long Press "-" key
Mic Control
Mic mute / unmute Long press center key
Voice Assist Control
Activate Voice Assist Press center key three times
LED Indication
Mode LED color/activity
Charging Red
Fully charged Red light will turn o
Pairing mode Red and Blue lights ashing alternately
Bluetooth connected Blue
Cleaning
1. If you notice problems with sound quality not related to the t inside
the ear canal, remove the sleeve and check the earphone nozzle for
obstructions.
2. If the nozzle is blocked, use the included cleaning tool to clear the block.
3. Replace the sleeve onto the nozzle, and re-insert the earphones into
your ear to test the sound.
Maintenance tips
Keep the earphones and sleeves clean and dry.
To clean, remove the sleeves from the earphone nozzle, gently rinse
in warm water and allow to air dry. Sleeves should be completely
dry before
Inspect sleeves for damage and replace as necessary.
Avoid exposing the sleeves to extreme temperatures.
Replace sleeves that do not t properly.
Nozzle
Nozzle
Cleaning
Tool
FEDERAL COMMUNICATIONS COMMISSION
COMPLIANCE INFORMATION
Responsible Party Name: Music Tribe Commercial NV Inc.
Address: 5270 Procyon Street,
Las Vegas NV 89118, United States
Phone Number: +1 702 800 8290
SD251-BT
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in
a residential installation. This equipment generates, uses and can radiate
radio frequency energy and, if not installed and used in accordance with
the instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment o and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
SD251-BT
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit dierent from that to
which the receiver is connected
Consult the dealer or an experienced radio/TV technician for help.
This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.n.
Important information:
Changes or modications to the equipment not expressly approved by Music
Tribe can void the users authority to use the equipment.
Specications
Driver 6.8 mm
Impedance 22 Ω
Frequency responsew 20 Hz to 20 kHz
Sound pressure level (SPL) 93 dB @1kHz (105 dB peak)
Rated power 3 mW
Bluetooth* Version 5.0
Frequency range 2402 MHz ~ 2480 MHz
Channel number 79
Max output power 5 dBm
Bluetooth range Up to 10 m (33 ft) in line of sight
CODEC support aptX, AAC, SBC
Call support CVC 8.0
Mic sensitivity -42 dB (±3 dB) @ 1 kHz, 0 dB = 1 V/Pa
Battery type Rechargeable lithium battery
Working time Up to 7 hrs
Standby time Up to 150 hrs
Charging time 1 hr via USB 5 V / 500 mA
Cable Shielded, detachable
Connector MMCX connector, detachable
Cable length 25 cm (10")
*The Bluetooth® word mark and logos are owned by the Bluetooth SIG, Inc.,
and any use of such marks by Music Tribe is under license.
Other important information
Register online. Please register your new Music Tribe equipment right after
you purchase it by visiting behringer.com. Registering your purchase using
our simple online form helps us to process your repair claims more quickly and
eciently. Also, read the terms and conditions of our warranty, if applicable.
Malfunction. Should your Music Tribe Authorized Reseller not be located
in your vicinity, you may contact the Music Tribe Authorized Fulller for your
country listed under “Support” at behringer.com. Should your country not be
listed, please check if your problem can be dealt with by our “Online Support
which may also be found under “Support” at behringer.com. Alternatively,
please submit an online warranty claim at behringer.com BEFORE returning
the product.


Specyfikacje produktu

Marka: Behringer
Kategoria: Słuchawki
Model: SD251-BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Behringer SD251-BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Słuchawki Behringer

Instrukcje Słuchawki

Najnowsze instrukcje dla Słuchawki

Klipsch

Klipsch R6i Instrukcja

15 Października 2024
Vakoss

Vakoss MH954 Instrukcja

14 Października 2024
Skullcandy

Skullcandy Cassette Instrukcja

14 Października 2024
Jabra

Jabra Wave Corded Instrukcja

14 Października 2024
Manta

Manta MM65 Instrukcja

14 Października 2024
AKG

AKG Y600NC Instrukcja

14 Października 2024
Audio-Technica

Audio-Technica ATH-ANC29 Instrukcja

13 Października 2024
Daewoo

Daewoo AVS1421 Instrukcja

13 Października 2024
Vakoss

Vakoss MH942 Instrukcja

13 Października 2024
SuperTooth

SuperTooth Freedom Instrukcja

13 Października 2024