Instrukcja obsługi BASSBOSS AT212-MK3

BASSBOSS głośnik AT212-MK3

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla BASSBOSS AT212-MK3 (14 stron) w kategorii głośnik. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/14
User ManUal
Dual 12” 2-Way
Powered Loudspeaker
AT212-MK3
AT212-MK3 User Manual
2
Table of Contents
Overview 2
QuickStartGuide 4
OutboardProcessorWarning 5
SetupProcedure 5
OperationandControls 6
IndicatorLEDs 6
HowtoUsethePresets 7
Pre-InstalledOnboardPresets 8
PowerDistribution 9
Troubleshooting 9
Specifications 10
Warranty 11
SafetyInformation 12
ImportantNotes 13
FCCComplianceNotice 13
Overview
The AT212-MK3 is a very high-output, self-powered, internally processed, bi-amplified, 2-way, broad-
range loudspeaker. The cabinet is lightweight, the setup is easy and the output is smooth with a natural,
musical character. The remarkable power and eiciency of the AT212-MK3 make it ideal for providers
who want to deliver high sound pressure levels but prefer not to move heavy cabinets.
Intended for use with a subwoofer system to complete a 3-way active full-range system, the AT212-MK3
has a tall, slim design that allows the HF horn to stand above crowds when the cabinet is stacked on
subwoofers. The light weight of the cabinet makes stacking by one person possible. The AT212-MK3
cabinets weigh only 99 lbs.
The AT212-MK3 is a vented cabinet that features two high-eiciency 12” woofers. The woofers feature
3.5” voice coils, Neodymium magnets, cast aluminum baskets and ultra-light cones. The compression
driver also features a Neodymium motor structure with a 3” voice coil. It is mated to a 1.4” throat, cast
aluminum horn. The horn is rotatable, providing 80 x 60 degree coverage for multiple applications
including ground stack and horizontal or vertical flying.
Estemanualestádisponibleenespañolennuestrositiowebenbassboss.com/support
Dual 12” 2-Way
Powered Loudspeaker
AT212-MK3
bassboss.com
3
The AT212-MK3 is the ultimate in plug and play, with universal voltage compatibility and no need for any
outboard gear, other than a sound source. The built-in processing features presets that allow it to run in
multiple configurations. Each preset oers advantages that suit specific applications and preferences.
Power is supplied by an amplifier that can deliver output peaks of 163V, to provide amazing dynamic
resolution and impact. The fully integrated and comprehensive digital processing ensures smooth
response and reliable operation thanks to meticulous filter alignments and five-stage limiters that
protect the drivers from excessive excursion, thermal overload and clipping. The amplifier features a
large heat sink and 2 temperature-controlled fans to ensure consistent operation, even under the most
extreme conditions.
The cones are waterproofed to protect them from accidental exposure to moisture such as rain or spilled
beverages. Weather resistant, IP65 rated power connectors, an internally sealed input section and
waterproof-treated cones are provided to allow operation where rain might be encountered.
The cabinet is built from 18mm and 15mm Birch plywood. It features an 18mm bale and 18mm top and
bottom, with 15mm sides, port walls and braces, all assembled with dado joinery. The cabinet includes
4 steel bar-handles, 4 internally braced steel M10 fly points and a 35mm (1-3/8”) cast metal pole socket.
Although the AT212 cabinet is equipped with a 35mm steel pole socket, DO NOT use this speaker on a
tripod or extension pole. This socket is to be used with a special, short section of pole to prevent it from
moving once stacked on a subwoofer.
The MK3 features an all-new DSP. The comprehensive suite of processing includes multiple presets,
each including multiple protection systems and limiters to prevent driver overload in as many ways
as possible, including thermal, excursion and clipping. There are five levels of protection that actively
prevent overheating of the voice coil, minimize long-term thermal compression and limit excursion.
Because they operate in 5 dierent modes, the limiters are sophisticated enough to have a largely
unnoticable eect on the transient response and allow the subwoofer to deliver peak output safely.
Each preset has a specific high-pass filter frequency and alignment filters that ensure it’s output is
always phase coherent with any BASSBOSS sub. No matter which preset you choose, your BASSBOSS
subs and tops will always play in harmony.
The full-range mode, Preset 1, provides response down to 50Hz (-3dB). Each successive preset filters
the lows out at higher frequencies. As low-frequency demand is reduced, higher sound levels can be
achieved, allowing the AT212-MK3 to be used above multiple subwoofers.
Not including Cardioid, there are up to 56 possible combinations when MK3 tops are used with MK3
subs, but don’t worry, all are compatible. You can’t choose a “wrong” preset, you simply choose the
combination you like best.
The new DSP features an Ethernet interface. This can be used to control the cabinets from a computer
or to load software or firmware updates. The ethernet connectivity, in conjunction with the new DSP
board, will allow signal to be sent via Milan AVB. (Firmware updates will provide access to this feature.)
Within the software, multiple cabinets can be grouped together, allowing them to respond to commands
simultaneously. This permits the levels of groups of loudspeakers to be adjusted together, and yet
independently from the levels of other groups of loudspeakers. In addition to individual and grouped
level controls, presets can be loaded and signal levels and temperatures can be monitored. Each cabinet
includes a two-port switch, so multiple cabinets can be chained on the same data cable.
The MK3 DSP features storage capacity of up to 100 presets, eight of which can be accessed at the touch
of a button with no need for a connected computer. The eight directly accessible presets are compatible
with all the presets in the MK3 Top Boxes and are also compatible with previous generation tops and
subs.

Specyfikacje produktu

Marka: BASSBOSS
Kategoria: głośnik
Model: AT212-MK3

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z BASSBOSS AT212-MK3, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje głośnik BASSBOSS

BASSBOSS

BASSBOSS DJ18-MK3 Instrukcja

5 Października 2024
BASSBOSS

BASSBOSS SSP118-MK3 Instrukcja

5 Października 2024
BASSBOSS

BASSBOSS CCM12-MK3 Instrukcja

5 Października 2024
BASSBOSS

BASSBOSS AT212-MK3 Instrukcja

5 Października 2024
BASSBOSS

BASSBOSS BB15-MK3 Instrukcja

5 Października 2024
BASSBOSS

BASSBOSS KRAKEN-MK3 Instrukcja

4 Października 2024
BASSBOSS

BASSBOSS DiaMon-MK3 Instrukcja

4 Października 2024
BASSBOSS

BASSBOSS SSP218-MK3 Instrukcja

16 Września 2024

Instrukcje głośnik

Najnowsze instrukcje dla głośnik

Teufel

Teufel Rockster Air Instrukcja

15 Października 2024
Alpine

Alpine PSS-22WRA Instrukcja

15 Października 2024
Bauhn

Bauhn APPS-0724 Instrukcja

15 Października 2024
Aiwa

Aiwa SP-A100 Instrukcja

15 Października 2024
Harman Kardon

Harman Kardon Citation One Instrukcja

14 Października 2024
Alpine

Alpine 30MC Instrukcja

14 Października 2024
Magnat

Magnat Needle 9000 ALU Instrukcja

14 Października 2024
Pioneer

Pioneer SP-T22A-LR Instrukcja

14 Października 2024
Sharp

Sharp PS-932 Instrukcja

14 Października 2024
Pyle

Pyle PDWR64BTW Instrukcja

13 Października 2024