Instrukcja obsługi Barska AE10824
Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barska AE10824 (1 stron) w kategorii teleskop. Ta instrukcja była pomocna dla 4 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek
Strona 1/1
ANCHOR MASTER
36 Power, 90080
Telescope
5
HOW TO ASSEMBLE YOUR SCOPE:
Before, you begin to assemble your scope, you will
need
to have a Phillips-head screwdriver and a
Crescent wrench. *NOTE* Please be careful not to
scratch your scope.
1. Place the optical tube and arc mount on its side.
2. Attach the legs of the tripod at the base of the mount.
3. Carefully slide one of the leg attachments shaft through
the top of the attached leg through the holes of the
mount. Make sure that the support tray brackets
are facing up.
4. Gently stand the scope and tripod, slowly spread the
legs of the tripod.
5. With the shining side of the support tray facing up,
screw in its brackets.
Make sure to tighten all screws and nuts. Your scope is
now assembled and ready to be used.
H
OW TO MOUNT THE FINDER SCOPE
1.
A
ttach
the 2 mounting rings to the optical tube with 4
mounting screws.
2. Center the fi nder scope within the mounting rings
using 6 mounting screws
HOW TO USE YOU SCOPE:
Start by loosening the lock and levers and gently guide
the
scope to your desired position.
1. Once it’s at the position that you want, tighten the locks
and levers.
2. Point the objective lens to an object and look through
the eyepiece.
3. With slow and tiny motions, rotate the focus knob
slowly, until your view of the object is sharp and
in focus.
HOW TO TAKE CARE OF YOUR SCOPE:
1. When wiping the lenses, use a soft lens cloth.
2. To remove any remaining dirt or smudges, add
one or two drops of isopropyl alcohol to the cloth,
then wipe gently.
3. Store your scope in a moisture-free area.
Parts included in package:
p g
Optical tube with mount attached 1 unit
Mahogany wood tripod legs 3 units
Acorn nuts 3 pcs
Support tray 1 unit
Washers and bolts 3 sets
Mounting Screws
10 pcs
Mounting Rings
2 pcs
PARTS
1. Optical tube with arc mount attached
2. Mahogany wood tripod
3. Support tray
4. Lock and levers
5. Objective Lens
6. Eyepiece
7. Focus Knob
8
.
Finder Scope
9. Image diagonal
**IMPORTANT**
NEVER ATTEMPT TO CLEAN YOUR SCOPE INTERNALLY OR
TRY TO TAKE IT APART. DO NOT LOOK DIRECTLY AT THE
SUN WITH THE SCOPE AS IT WILL CAUSE DAMAGE TO
YOUR EYE.
Specyfikacje produktu
| Marka: | Barska |
| Kategoria: | teleskop |
| Model: | AE10824 |
Potrzebujesz pomocy?
Jeśli potrzebujesz pomocy z Barska AE10824, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą
Instrukcje teleskop Barska
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
26 Września 2024
Instrukcje teleskop
- teleskop Marquant
- teleskop IOptron
- teleskop National Geographic
- teleskop Carson
- teleskop Bresser
- teleskop Orion
- teleskop Levenhuk
- teleskop Sky-Watcher
- teleskop GlobalTronics
- teleskop Celestron
- teleskop Konig
- teleskop Meade
- teleskop Vixen
- teleskop Discovery
- teleskop Danubia
- teleskop ZWO
- teleskop SVBONY
- teleskop DayStar Filters
- teleskop Mizar
Najnowsze instrukcje dla teleskop
8 Października 2024
4 Października 2024
4 Października 2024
3 Października 2024
3 Października 2024
3 Października 2024
2 Października 2024
1 Października 2024
1 Października 2024
29 Września 2024