Instrukcja obsługi Barox PC-INJ-95-B


Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Barox PC-INJ-95-B (8 stron) w kategorii Karta sieciowa/adapter. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/8
User Manual
Industrial Injector
PC-INJ-30W
PC-INJ-30W-B
PC-INJ-60W
PC-INJ-60W-B
PC-INJ- -B95
Version 11.2019
2
Introduction
This rugged designed industrial PoE injector is equipped with a 30W/60W/95W PSE port. This
PSE port can be powered by 48-56 VDC input voltage. With its multi-purpose design, it can also
be Din-Rail or wall-mounted. It is an ideal unit for Mobile Base Station (BTS), IP surveillance,
traffic monitoring and security applications in critical environments. It can tolerate -40°C to 75°C
in harsh environments to perform a reliable network. This product has been rigorously tested in
harsh environments for your security, transportation, and telco applications.
Note
Always make sure the total length of the TX cable DOES NOT exceed 100 meters. Total length
is defined as length A + length B.
Length A + Length B < 100 meters
POE signal attenuates every meter, the built-in transformer allows the attenuation to reach 100
meters to follow IEEE802.3af/at standards. The higher quality PD you connect to, the more
reliable the network will be. When connecting to a poor-quality PD, it cannot generate a strong
enough signal for the remote switch. Always make sure you have a high-quality PD to perform
your desired network.
A
B
PD
Remote Switch
3
Installation package
This unit can be din-rail mounted or wall-mounted. Din-rail brackets and -mount brackets are wall
included.
Power connection
This unit provides a 4 pin terminal block. It can be operated using 48-56VDC power source.
Always make sure your input voltage is within this supported voltage range.
To connect power: This unit supports two power inputs. Follow the printed polarity for +V1-,
+V2- and ground. Connect positive wires to V+, connect negative wires to V-, and connect a
neutral wire to the ground screw.
+V1- is for power input one connection.
+V2- is for power input two connection.
Power connecting procedure:
STEP 1 – Take out 4 pin terminal block located in
the included mounting kit package.
STEP 2 – Connect power wires to +V1- or +V2-
with corresponding polarity. Connect the
grounding wire to the ground screw.
STEP 3 – Plug into terminal block socket shown
above. Polarity needs to match V+ and V-.
WARNING Always SHUT OFF power source to connect power wire.--
WARNING Any exceeded input voltage will not make this unit function and may --
damage this unit.
+V1- +V2-


Specyfikacje produktu

Marka: Barox
Kategoria: Karta sieciowa/adapter
Model: PC-INJ-95-B

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Barox PC-INJ-95-B, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Karta sieciowa/adapter Barox

Barox

Barox PC-INJ-30W Instrukcja

27 Września 2024
Barox

Barox PC-INJ-60W-B Instrukcja

27 Września 2024
Barox

Barox PC-INJ-30W-B Instrukcja

27 Września 2024
Barox

Barox PC-INJ-95-B Instrukcja

27 Września 2024

Instrukcje Karta sieciowa/adapter

Najnowsze instrukcje dla Karta sieciowa/adapter