Instrukcja obsługi Baracuda Chlor Control

Baracuda Niesklasyfikowane Chlor Control

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baracuda Chlor Control (4 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/4
Chlor Control
Semi-Automatic Liquid Chlorine Feeder
Installation & Operating Instructions
10
9
8
7
6
5
0
1
D
E
C
R
E
A
S
E
I
N
C
R
E
A
S
E
CHEMICAL
DOSING SYSTEM
MAINTENANCE:
1. Lubricate squeeze tube every 6 months with
RC tube lube.
2. Clean injection point periodically
3. Squeeze tube may need to be replaced
every 12 - 18 months
Baracuda® Chlor Control Semi-Automatic Liquid Chlorine Feeder | Installation and Operating Instructions
5
Section 2. System Overview
2.1 Contents
Before starting, check that you have the correct parts as shown in Figures 1 and 2. If any parts are
missing or incorrect, please call your local distributor or technical support at 1300 186 875 for
assistance.
10
9
8
7
6
5
0
1
D
E
C
R
E
A
S
E
I
N
C
R
E
A
S
E
CHEMICAL
DOSING SYSTEM
MAINTENANCE:
1. Lubricate squeeze tube every 6 months with
RC tube lube.
2. Clean injection point periodically
3. Squeeze tube may need to be replaced
every 12 - 18 months
1
6
2
3
4
5
Figure 1. Baracuda Chlor Control Kit Contents
Description Quantity
1 Baracuda Chlor Control 1
2 Injection Point Body 1
3 Gland Grommet 1
4 Gland Washer 1
5 Gland Nut 1
6 Vent Kit 1
NOTE: The vent kit is supplied with 4 meters of clear tube which needs to be cut to the required length to suit the
installation.
NOTE: “Installing the Vent Two lids are supplied with the kit to suit either a 25/15 ltr or a 5 ltr container. (See also
Kit” Section 4.2.)
Baracuda® Chlor Control Semi-Automatic Liquid Chlorine Feeder | Installation and Operating Instructions
8
4.3 Placement of Chemicals
To avoid potential corrosion issues, the liquid
chlorine drum shouldn’t be placed underneath
any equipment.
Correct Installation Incorrect Installation
10
9
8
7
6
5
0
1
D
E
C
R
E
A
S
E
I
N
C
R
E
A
S
E
CHEMICAL
DOSING SYSTEM
MAINTENANCE:
1. Lubricate squeeze tube every 6 months with
RC tube lube.2. Clean injection point periodically
3. Squeeze tube may need to be replaced
every 12 - 18 months
THE TRUSTED NAME IN POOL CARE
10
9
8
7
6
5
0
1
D
E
C
R
E
A
S
E
I
N
C
R
E
A
S
E
CHEMICAL
DOSING SYSTEM
MAINTENANCE:
1. Lubricate squeeze tube every 6 months with
RC tube lube.2. Clean injection point periodically
3. Squeeze tube may need to be replaced
every 12 - 18 months
THE TRUSTED NAME IN POOL CARE
Figure 5. Chemical Placement
4.4 Placement of Control Unit
If the Baracuda Chlor Control is installed
in an enclosure or shed, the liquid chlorine
drum should ideally be stored out side of the
enclosure or shed.
The Baracuda Chlor Control needs to be kept
away from the elements to protect the longevity
and function of the components.
10
9
8
7
6
5
0
1
D
E
C
R
E
A
S
E
I
N
C
R
E
A
S
E
CH EMICA L
DOSIN G SYSTEM
MAINTENANCE:
1. Lubricate squeeze tube every 6 months with
RC tube lube.
2. Clean injection point periodically
3. Squeeze tube may need to be replaced
every 12 - 18 months
THE TRUSTED NAME IN P OOL CARE
10
9
8
7
6
5
0
1
D
E
C
R
E
A
S
E
I
N
C
R
E
A
S
E
CH EMICA L
DOSIN G SYSTEM
MAINTENANCE:
1. Lubricate squeeze tube every 6 months with
RC tube lube.
2. Clean injection point periodically
3. Squeeze tube may need to be replaced
every 12 - 18 months
THE TRUSTED NAME IN P OOL CARE
Figure 6. Baracuda Shelter Requirements
The flexible tube from the liquid chlorine drum
must be connected to the left-hand barb of the
Baracuda Chlor Control and the tube to the
pool is connected to the right-hand barb. Cut a
suitable length of flexible tubing to run from the
liquid chlorine drum to the Chlor Control unit.
To connect the Baracuda Chlor Control to the
dosing tubes, slide a clamping nut onto each
tube (as shown in Figure 4) and push the tube
onto the barb. Slide the clamping nut up the
tube and hand tighten it onto the pump.
7
1
MA INT ENA NC E:
1. L ubri cate squ eeze tu be ever y 6 mon ths wi th
RC tube l ube.
2. C lean injecti on p oint perio dical ly
3. S queeze tube may need to b e repl aced
every 12 - 18 m onths
THE TRUSTED NAME IN POOL CARE
Figure 4. Baracuda Tubing Connections
From Chemical Drum
To Injection Point
To Pool
Line
To Pool
Line
Chemical
Drum

Specyfikacje produktu

Marka: Baracuda
Kategoria: Niesklasyfikowane
Model: Chlor Control

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Baracuda Chlor Control, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Baracuda

Baracuda

Baracuda Saltmaster Instrukcja

22 Września 2024
Baracuda

Baracuda Adventura Instrukcja

22 Września 2024
Baracuda

Baracuda Tracker Instrukcja

20 Września 2024
Baracuda

Baracuda Chlor Control Instrukcja

17 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024