Instrukcja obsługi Baracuda Adventura

Baracuda Niesklasyfikowane Adventura

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Baracuda Adventura (16 stron) w kategorii Niesklasyfikowane. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/16
H0738500_REVB
TYPE EM14 --
TYPE EM15 --
Baracuda® Adventura™ Robotic Pool Cleaner | Owner's Manual
The BARACUDA Adventura is suitable for most domestic in-ground pools up to 12m x 6m.
Pool surfaces include: Concrete, pebblecrete, quartzon, fibreglass, tile and vinyl. Not suitable for above
ground pools. Suitable for all types of debris.
YOUR CLEANER HAS BEEN DESIGNED AND MANUFACTURED TO BE EASILY INSTALLED AND TO PROVIDE
LOW MAINTENANCE OPERATION. A WARRANTY CARD IS SUPPLIED IN THE BOX. PLEASE GO TO
BARACUDA.COM. AUTO REGISTER FOR WARRANTY.
Taking these steps will help ensure prompt warranty service, should it be required. If service is required,
please contact your original dealer. If the original dealer does not perform warranty service, please visit
www.baracuda.com.au to locate an independent service company near you. If you are unable to locate a
service company,please call our Baracuda Customer Service at 1300 784 423.
Section 1. Important Safety Instructions......3
Section 2. Getting Started...............................4
2.1 General Specifications.....................................4
Section 3. Assembly.........................................4
3.1 Unpacking..........................................................4
3.2 Assemble the Transport Caddy......................4
3.3 Connecting the Control Unit to
the Caddy...........................................................5
Section 4. Operation.........................................7
4.1 Submerging the Cleaner..................................7
4.2 Using the Control Unit.....................................8
4.3 Start / Stop Cleaning.......................................8
4.4 Lift System / Removal From Pool..................8
4.5 Rinsing the Cleaner..........................................9
4.6 Cleaning the Filter Canister............................9
4.7 Storing the Cleaner........................................10
Table of Contents
Section 5. Maintenance...................................11
5.1 Cord Tangling...................................................11
5.2 Replacing the Brushes....................................11
5.3 Replacing the Track........................................12
Section 6. Troubleshooting............................13
6.1 Using the Information LED............................13
6.2 General Troubleshooting................................14
Section 7. Conformity.....................................15
Introduction
Congratulations on the purchase of your new BARACUDA Adventura robotic pool cleaner. Your Adventura is
designed and manufactured for easy installation, and years of carefree operation. Before installing the cleaner, please
take a few moments to become familiar with its components and to review the items listed under Important
Information.
2
Suitable Pools
Baracuda® Adventura™ Robotic Pool Cleaner | Owner's Manual
Section 1. Important Safety Instructions
CAUTION
USE OF THE BARACUDA ROBOTIC CLEANER IN A VINYL LINER POOL
Certain vinyl liner patterns are particularly susceptible to rapid surface wear of pattern removal caused by objects coming
into contact with the vinyl surface, including pool brushes, pool toys, floats, fountains, chlorine dispensers, and automatic
pool cleaners. Some vinyl liner patterns can be seriously scratched or abraded simply by rubbing the surface with a pool
brush. Ink from the pattern can also rub off during the installation process or when it comes into contact with objects in
the pool. Fluidra Group Australia Pty Ltd is not responsible for, and the Limited Warranty does not cover, pattern removal,
abrasion or markings on vinyl liners.
SAVE THESE INSTRUCTIONS
WARNING
Failure to comply with the following warnings can result in permanent injury, electrocution or death.
PREVENT ELECTRICAL SHOCK
To reduce risk of electrical shock:
• The cleaner is to be installed in accordance with the relevant requirements of the Australian wiring rules AS/NZS 3000.
Also refer to the installation instructions relating to the swimming pool equipment for which the cleaner will be an integral
part. The cleaner is to be supplied through a Residual Current Device (RCD) with a rated residual operating current of
30mA.
• Do not enter pool while the robotic cleaner is in water.
• Do not bury cord. Locate cord so as to prevent it from being damaged by lawn mowers, hedge trimmers and other
equipment.
• To reduce the risk of electrical shock, do not use the robotic cleaner or control box if the cord is worn or damaged. Contact
Baracuda Customer care Service 1300 784 423 immediately for proper servicing and replacement of the damaged cord.
• Double insulation—For continued protection against possible electric shock, use only identical replacement parts when
servicing. Do not attempt repair of the robotic cleaner, control box, power cord, or floating cable.
• Use only the power supply provided with the product.
• NEVER OPEN Control box.
• Do not use an extension cord to connect the unit to electric supply; provide a properly located RCD PROTECTED Power
outlet. The control box should be placed near the RCD PROTECTED GFCI Power outlet point.
PREVENT CHILD INJURY AND DROWNING
• To reduce the risk of injury, do not permit children or persons with reduced physical, sensory or mental capabilities, or lack
of experience and knowledge to operate this product.
• Do not let anyone, especially small children, sit, step, ean, or climb on any equipment installed as part of our pool’s l y
operational system.
CAUTION
Failure to comply with the following warnings could cause damage to pool equipment or personal injury.
• The robotic cleaner must be installed and operated as specified.
• This product is intended for use with permanently-installed pools. Do not use with storable pools. A permanently-installed pool
is constructed in or on the ground or in a building such that it cannot be readily disassembled for storage. A storable pool is
constructed so that it is capable of being readily disassembled for storage and reassembled to its original integrity.
• Clean the filter canister after each use.
• Do not use the product in your pool if the water temperature is above 35˚ C 95˚ F or below 13˚ C 55˚ F ( ) ( ).
3

Specyfikacje produktu

Marka: Baracuda
Kategoria: Niesklasyfikowane
Model: Adventura

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Baracuda Adventura, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje Niesklasyfikowane Baracuda

Baracuda

Baracuda Saltmaster Instrukcja

22 Września 2024
Baracuda

Baracuda Adventura Instrukcja

22 Września 2024
Baracuda

Baracuda Tracker Instrukcja

20 Września 2024
Baracuda

Baracuda Chlor Control Instrukcja

17 Września 2024

Instrukcje Niesklasyfikowane

Najnowsze instrukcje dla Niesklasyfikowane

Black Diamond

Black Diamond BD1121530000ALL1 Instrukcja

15 Października 2024
Husqvarna

Husqvarna K 970 SmartGuard Instrukcja

15 Października 2024
Stihl

Stihl HT 70 Instrukcja

15 Października 2024
Ernesto

Ernesto H14270 Instrukcja

15 Października 2024
Uniden

Uniden BT MIC KIT Instrukcja

15 Października 2024
Vaude

Vaude Omnis Bike 26 Instrukcja

15 Października 2024
ART

ART ProChannel II Instrukcja

15 Października 2024
Aukey

Aukey DR02J Instrukcja

15 Października 2024
Master Lock

Master Lock 653EURD Instrukcja

15 Października 2024
Roland

Roland FR-18 Diatonic Instrukcja

15 Października 2024