Instrukcja obsługi Azden 2000BT

Azden mikrofon 2000BT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Azden 2000BT (8 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 3 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
SPECIFICATIONS
2000URX
Receiving Frequency 638.125Mhz ~ 661.875 Mhz 188 Channels
Receiving Method Space diversity double super heterodyne
Sensibility 0.8 V μ
Reference Deviaon ±5kHz
Max. Deviaon ±40kHz
Inter Modulaon 65dB or more
Noise Reducon Compander
Audio Output Level 4dBm MAX
Signal noise Rao 100dB or more (100% Dev)-to-
Distoron Rao 0.8% or less (100% Dev)
Antenna Connector BNC Connector
Interface w/ Camera D sub 15pin (Si s) D sub 25 pin(Si) - - -
Audio Output Jack XLR 3 / 3.5mm stereo mini for monitoring -32-
Power DC 6V (4 AA baeries)
External Power DC 11V ~ 15V(URX) DC 7V (Si s) DC 12(10~17V) (Si) -
Power Consumpon 6V 240mA
LED 3 point RF level, diversity (A/B) (URX
3 point AF level, Tone squelch (URX)
LCD Receiving frequency, channel (URX)
Frequency, Channel, RF Level w/ indicators,
- Diversity A or B, AF Level w/ indicators (URX Si s, URX Si)
Size 98mm (W) x 109.5mm (H) x 40mm (D) (URX)
- 80mm (W) x 22mm (H) x 35mm (D) (URX/Si s, URX/Si)
Weight 620g(URX)
- 245g(URX/Si s)/240g(Si)
2000BT/XT
Transming Frequency 638.125MHz~661.875MHz (188channels)
Radio Type F3E (FM)
Oscillaon Crystal controlled PLL Synthesizer - - -
Aerial Power 50mW
Tone Frequency 32.768 kHz
Noise Reducon Compander
Mic In/Level - - Hirose 4pin/ECM: 60dBu
Impedance 3.3 Ω
Frequency Response 50~15kHz±1.5dB
LED AF- Peak, Baery Low Alarm
LCD Output frequency, channel, accumulated me
Power DC 3V (2AABaeries)
Power Consumpon Less than 130ma
Baery Life About 8 Hours (when used AA Baeries)
Due to constant improvements, specicaons are subject to change without noce.
Licensing
Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on
the user’s classicaon, applicaon and frequency. Contact the appropriate agency (FCC in the USA) for further informaon.
Azden Corporaon, 200 Valley Rd, Suite 101, Mt. Arlington, NJ 07856
tel - - 973.810.3070 • fax 973.810.3076 • email - sales@azdencorp.com • web www.azden.com-
2000URX • 2000URX/Si/Si S • 2000BT • 2000XT-
ENHANCED BROADCAST PERFORMANCE
UHF WIRELESS SYSTEM
User’s Guide
i
2000URX Receiver
2000URX/Si Receiver
2000BT Transmier
j j
l p
o k n
s r
j
j
r o p
s
k
p
q l
s
o
j m
E. Display
In addion to showing the frequency and the channel number, the display [J]
also shows other useful informaon.
The LCD segments on the le show the approximate remaining baery life
(from 1 to 3 segments) with 3 segments meaning maximum baery power.
The boom segment will blink when the baery power falls to less than
2.2VDC and indicates that it is me to replace the baeries. Azden recom-
mends the use of Alkaline baeries only.
Across the top of the display, up to 5 segments will illuminate depending on
the strength of the transmied audio signal From 2 (weak) to 5 (strong). The -
rst (le) segment will light when the AUDIO switch is turned ON. The best
audio is achieved when 4 to 5 segments are lit. If all 5 segments are lit conn-
ually, the signal is too strong and could overload the input of the receiver.
Move the microphone further away from the sound source.
The display can also show the total number of hours of use (change to this
display using the mode [n] buon. To start, aer choosing the TIME mode,
press the UP [o] Buon unl the display shows 00:00. Then, each me the
transmier is turned ON the clock will keep track of the total hours and
minutes used. This is a handy way of keeping track of baery life.
11
USING THE 2000XT TRANSMITTER’S CONTROLS AND DISPLAY
A. Power
The POWER ON/OFF switch [r] turns the 2000XT ON or OFF.
B. Audio
Prior to turning the 2000XT ON it is best to set the AUDIO switch [ q] To OFF.
When ready to begin transming, switch to ON. The OFF posion acts as a
“mute” maintaining the RF signal but turning o the audio.
C. MIC Connector/Locking Ring
This 3 pin XLR connector [l] is the microphone input. Any low impedance mi--
crophone with a corresponding connector can be aached here. If the micro-
phone requires external power (Phantom Power) the 2000XT can supply
48VDC. The XLR connector is wired with pin #1 as ground, pin # 2 as audio +
(and +48VDC when Phantom Power is ON) and pin #3 as audio.
Once the microphone is plugged into the 2000XT the locking ring [m] should
be rotated clockwise unl snug. To remove the microphone, rst rotate the
locking ring counterclockwise and then, while pressing the XLR release, pull
the microphone straight away from the 2000XT.
D. Input Level Adjustment
This screwdriver adjustment [p] controls the input level of the microphone.
Counterclockwise rotaon reduces the input gain while clockwise rotaon in -
creases the input gain.
10
l
p
j
n o
q r
INTRODUCTION
Thank you for selecng the Azden 2000 Series for your portable/
ENG on camera UHF wireless needs. We are condent that these -
components will perform beyond your expectaons. For over 50
years, Azden Corporaon has been creang technologically ad-
vanced products. By taking advantage of the latest in CAD design
and SMT producon techniques, Azden’s engineers are able to pro-
duce products that exceed the published specicaons and per-
form well beyond the warranty period.
The 2000 Series represents a breakthrough in on camera, digital -
frequency selectable UHF receivers and transmiers. Its enhanced -
performance assures you of the highest image rejecon combined
with the nest in audio clarity. The PLL synthesized mixer/local os--
cillator provides for extremely accurate frequency selecon while
the twin antenna true diversity front end reduces mul path dis-- - -
toron caused dropouts to near zero.
In the real world of ENG, the ability to be able to select a “clear”
frequency on the spot is vitally important. Going out into the eld
with a single frequency unit invites disaster since there is no way of -
knowing what frequencies will be used by the other crews that are
covering the same story or event. Think of the 2000 Series units as
your insurance policy Your assurance of geng the story.-
Designed by professionals For professionals, the 2000 Series will -
provide you with years of worry-free, high quality performance.-
ii

Specyfikacje produktu

Marka: Azden
Kategoria: mikrofon
Model: 2000BT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Azden 2000BT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Azden

Azden

Azden SGM-250CX Instrukcja

6 Października 2024
Azden

Azden WMS-PRO Instrukcja

15 Września 2024
Azden

Azden PRO-XD Instrukcja

10 Września 2024
Azden

Azden 1201URX/SI Instrukcja

9 Września 2024
Azden

Azden WDL-PRO Instrukcja

5 Września 2024
Azden

Azden SMX-10 Instrukcja

3 Września 2024
Azden

Azden SGM-3500L Instrukcja

3 Września 2024
Azden

Azden SGM-3416L Instrukcja

1 Września 2024
Azden

Azden SGM-PII Instrukcja

31 Sierpnia 2024
Azden

Azden 1201XT Instrukcja

31 Sierpnia 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Countryman

Countryman B6 Instrukcja

15 Stycznia 2025
Pyle

Pyle PMKSHUSB04 Instrukcja

15 Stycznia 2025
DJI

DJI Mic Mini Instrukcja

15 Stycznia 2025
Vonyx

Vonyx CMS320B Instrukcja

15 Stycznia 2025
BOYA

BOYA BY-PM700 Instrukcja

14 Stycznia 2025
Audio-Technica

Audio-Technica BP892xCW Instrukcja

13 Stycznia 2025
Sound Devices

Sound Devices Astral A20-HH Instrukcja

13 Stycznia 2025
HyperX

HyperX QuadCast S Instrukcja

12 Stycznia 2025
Schertler

Schertler STAT-C Instrukcja

11 Stycznia 2025
Shure

Shure SBC210LM Instrukcja

10 Stycznia 2025