Instrukcja obsługi Azden 1201XT

Azden mikrofon 1201XT

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla Azden 1201XT (8 stron) w kategorii mikrofon. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Pobierz PDF
Strona 1/8
User’s Guide
1201URX/AB • 1201URX/VM • 1201URX/Si/Si-S
1201BT • 1201XT
ENHANCED BROADCAST PERFORMANCE
UHF WIRELESS SYSTEM
1201URX/AB - 1201URX/Si - 1201URX/VM/Si-S
RF Carrier Frequency Range 188 steps ~ 638.125 - 661.875 MHz
MicroComputer Controlled PLL Synth.
Noise Reduction Expander (THAT)
Effective Operating Range 200 - 300 ft ~ 60 - 100m
Frequency Response 50 - 15kHz (± 1.5dB)
RF Sensitivity (12dB SINAD) 1.2μV
Adjacent Channel Selectivity > 70dB (± 250kHz)
Image Rejection > 93dB
IF Rejection > 93dB
Audio THD < 0.8%
Audio Output 40dBm ± 40kHz Deviation (-20dBm ± 40kHz Deviation for 1201URX\Si)
Output Impedance 600Ω (300Ω for 1201URX\Si)
Signal/Noise Ratio > 62dB (± 5kHz Deviation) “A” Weighted
Power Requirements 11 - 15V DC @ 220mA (10 - 17V DC @ 200mA for 1201URX\Si)
Dimensions 68W x 84H x 18D mm- 1201URX/Si insertion
93W x 119H x 49D mm - 1201URX/AB
82W x 150H x 60D mm - 1201URX/VM
Operating Temperature Range -500 - +1220 F ~ -100 - +500 C
Weight 8.8 ounces ~ 250g for 1201URX/Si
15.87ounces ~ 450g for 1201URX/AB
26.45ounces ~ 750g for 1201URX/VM
1201BT
Output Power 30mW
Max Modulation Sensitivity -4dBm
MIC Level / Imped. -56dBm (± 5kHz Deviation)
Power Requirements 3V DC (2 “AA” Alkaline) @ < 150mA
Dimensions 2.48 (W) x 3.86 (H) x 1.12 (D) inches
63 (W) x 98 (H) x 28.5 (D) mm
Weight w/Battery 6.35 ounces ~ 180g
1201XT
Output Power 30mW
Max Modulation Sensitivity +20dBM ~ 0dBm
MIC Level / Imped. (Dynamic) -60dBm / 2.2kΩ (± 5kHz Dev.)
Phantom Power 48V ±2V @ 2mA
Power Requirements 3V DC (2 “AA” Alkaline) @ < 180mA - 290 mA w/Phantom Power ON
Dimensions 1.57 (W) x 4.49 (H) x 1.57 (D) inches
40 (W) x 114 (H) x 40 (D) mm
Weight w/Battery 6.35 ounces ~ 180g
Due to constant improvements, specications are subject to change without notice.
Licensing
Licensing of this, or any Azden wireless equipment is the user’s responsibility. The ability to receive a license depends largely on the user’s classication, applica-
tion and frequency. Contact the appropriate agency (FCC in the USA) for further information.
SPECIFICATIONS
Azden Corporation, 147 New Hyde Park Road, P.O. Box 10, Franklin Square, NY 11010
tel - 516.328.7500 • fax - 516.328.7506 • email - sales@azdencorp.com
© 2010 Azden Corporation Printed in USA P1030-02
1201URX/VM
1201URX/AB
E. Display
The LCD segments on the left show the approximate remaining battery
life (from 1 to 3 segments) with 3 segments meaning maximum battery power.
The bottom segment will blink when the battery power falls to less than
2.2VDC and indicates that it is time to replace the batteries. Azden recom-
mends the use of Alkaline batteries only.
Across the top of the display up to 5 segments will illuminate depending
on the strength of the transmitted audio signal - From 2 (weak) to 5 (strong).
The rst (left) segment will light when the AUDIO switch is turned ON. The
best audio is achieved when 4 to 5 segments are lit. If all 5 segments are
lit continually, the signal is too strong and could overload the input of the
receiver. Move the microphone further away from the sound source.
The display can also show the total number of hours of use (change
to this display using the mode [ ] button. To start, after choosing the TIME
mode, press the UP [ ] Button until the display shows 00:00. Then, each
time the transmitter is turned ON the clock will keep track of the total hours
and minutes used. This is a handy way of keeping track of battery life.
i 11
1201URX/VM
1201URX/AB 1201URX/Si
In addition to showing the frequency and the channel number, the dis-
play [ ] also shows other useful information.
INTRODUCTION
Thank you for selecting the Azden 1201 Series for your portable/ENG
on-camera UHF wireless needs. We are condent that these compo-
nents will perform beyond your expectations. For over 50 years, Azden
Corporation has been creating technologically advanced products. By
taking advantage of the latest in CAD design and SMT production tech-
niques, Azden’s engineers are able to produce products that exceed the
published specications and perform well beyond the warranty period.
The 1201 Series represents a breakthrough in on-camera, digital
frequency-selectable UHF receivers and transmitters. Its enhanced per-
formance assures you of the highest image rejection combined with the
nest in audio clarity. The PLL-synthesized mixer/local oscillator provides
for extremely accurate frequency selection while the twin-antenna true
diversity front-end reduces multi path distortion caused dropouts to near
zero.
In the real world of ENG, the ability to be able to select a “clear” fre-
quency on the spot is vitally important. Going out into the eld with a
single-frequency unit invites disaster since there is no way of knowing
what frequencies will be used by the other crews that are covering the
same story or event. Think of the 1201 Series units as your insurance
policy - Your assurance of getting the story.
Designed by professionals - For professionals, the 1201 Series will pro-
vide you with years of worry-free, high-quality performance.
ii
USING THE 1201XT TRANSMITTER’S CONTROLS AND DISPLAY
A. Power
The POWER ON/OFF switch [ ] Turns the 1201XT ON or OFF.
B. Audio
Prior to turning the 1201XT ON it is best to set the AUDIO switch [ ] To
OFF. When ready to begin transmitting, switch to ON. The OFF position acts as a
“mute” maintaining the RF signal but turning off the audio.
C. MIC Connector/Locking Ring
This 3-pin XLR connector [ ] Is the microphone input. Any low impedance
microphone with a corresponding connector can be attached here. If the microp
hone requires external power (Phantom Power) the 1201XT can supply 48VDC.
The XLR connector is wired with pin #1 as ground, pin # 2 as audio + (and
+48VDC when Phantom Power is ON) and pin #3 as audio -.
Once the microphone is plugged into the 1201XT the locking ring [ ]
should be rotated clockwise until snug. To remove the microphone, rst rotate the
locking ring counterclockwise and then, while pressing the XLR release, pull the
microphone straight away from the 1201XT.
D. Input Level Adjustment
This screwdriver adjustment [ ] controls the input level of the microphone.
Counterclockwise rotation reduces the input gain while clockwise rotation in-
creases the input gain.
10

Specyfikacje produktu

Marka: Azden
Kategoria: mikrofon
Model: 1201XT

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z Azden 1201XT, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą


Instrukcje mikrofon Azden

Azden

Azden SGM-250CX Instrukcja

6 Października 2024
Azden

Azden WMS-PRO Instrukcja

15 Września 2024
Azden

Azden PRO-XD Instrukcja

10 Września 2024
Azden

Azden 1201URX/SI Instrukcja

9 Września 2024
Azden

Azden WDL-PRO Instrukcja

5 Września 2024
Azden

Azden SMX-10 Instrukcja

3 Września 2024
Azden

Azden SGM-3500L Instrukcja

3 Września 2024
Azden

Azden SGM-3416L Instrukcja

1 Września 2024
Azden

Azden SGM-PII Instrukcja

31 Sierpnia 2024
Azden

Azden 1201XT Instrukcja

31 Sierpnia 2024

Instrukcje mikrofon

Najnowsze instrukcje dla mikrofon

Voice Technologies

Voice Technologies VT860 mkII Instrukcja

11 Grudnia 2024
Voice Technologies

Voice Technologies VT106HOF Instrukcja

11 Grudnia 2024
Voice Technologies

Voice Technologies VT403 Instrukcja

11 Grudnia 2024
Voice Technologies

Voice Technologies VT800 Instrukcja

11 Grudnia 2024
Vocopro

Vocopro AIR-NET Instrukcja

11 Grudnia 2024
ClearOne

ClearOne Ceiling Microphone Array Instrukcja

11 Grudnia 2024
Point Source Audio

Point Source Audio Series9 GO-9WL Instrukcja

11 Grudnia 2024
Neumann

Neumann KM 56 Instrukcja

10 Grudnia 2024
Alfatron

Alfatron ALF-BM10 Instrukcja

10 Grudnia 2024
Phonic

Phonic SPM-1 Instrukcja

10 Grudnia 2024