Instrukcja obsługi AWS MDI-20

AWS Weegschaal MDI-20

Przeczytaj poniżej 📖 instrukcję obsługi w języku polskim dla AWS MDI-20 (6 stron) w kategorii Weegschaal. Ta instrukcja była pomocna dla 2 osób i została oceniona przez 2 użytkowników na średnio 4.5 gwiazdek

Strona 1/6
MDI-20 (44lb x 0.1oz)
User Manual
Baby Scale
MDI-20
Copyright © 2011 American Weigh Scales, Inc.
All rights reserved. Rev. 1.0
MDI-20
Thank you for purchasing the American Weigh MDI-20
baby scale. Please read all operating instructions carefully before
use. Scales are precision measuring devices and should always
be handled with proper care. To ensure years of reliable service,
keep these simple tips in mind:
• Do not exceed the scale’s maximum capacity. Overloading
your scale can permanently damage it!
• Avoid exposure to extreme heat or cold. Scales perform
best at normal room temperature. If temperatures have
changed dramatically, calibration and adjustment may be
necessary.
• Allow your scale to warm up for 30-60 seconds before
performing calibration and adjustment(if available).
• Store your scale in a clean, dry location. Dust, dirt, and
moisture can accumulate on the weighing sensors and
electronics causing inaccuracy or malfunction.
• Avoid using your scale in close proximity to strong radio
wave emitting devices such as computers, cash registers,
and cordless phones.
• Alwaysweighonaatandlevelsurface,freefrom
vibrations and drafts. The corner of a room is usually the
most stable.
• Gently apply all items to be weighed. Do not drop items
onto the weighing platform.
• Avoid dropping your scale. The warranty does not cover
damage due to rough treatment or overload.
• Checkthebatteriesrstifyouarehavinganytrouble
with your scale. This simple step can remedy most scale
issues.
• Do not disassemble your scale. This product contains no
user serviceable parts.
UNIT SET
Max: 44lb
d: 0.1oz
MDI-20
TARE
I. Part List
1. Scale
2. AA Batteries (x4)
II. Key Description
III. Battery Installation
1. Beforeusingthescaleforthersttime,checkthebattery
compartment and remove any plastic insulation strips or
packaging that may be in place to prevent battery drainage
during shipping/storage.
2. If you are replacing the batteries, make sure the positive
and negative contacts are properly aligned.
SET Key
UNIT Key
ON/OFF
TARE Key

Specyfikacje produktu

Marka: AWS
Kategoria: Weegschaal
Model: MDI-20

Potrzebujesz pomocy?

Jeśli potrzebujesz pomocy z AWS MDI-20, zadaj pytanie poniżej, a inni użytkownicy Ci odpowiedzą




Instrukcje Weegschaal AWS

AWS

AWS OM-200 Instrukcja

1 Października 2024
AWS

AWS MDI-20 Instrukcja

1 Października 2024
AWS

AWS ZETA ZT-150 Instrukcja

1 Października 2024

Instrukcje Weegschaal

Najnowsze instrukcje dla Weegschaal

Robi

Robi S9 Instrukcja

2 Października 2024
Robi

Robi S11 Instrukcja

2 Października 2024
Sana

Sana Digital Scale Instrukcja

2 Października 2024
A&D

A&D UC-324NFC Instrukcja

2 Października 2024
A&D

A&D UC-502 Instrukcja

2 Października 2024
A&D

A&D UC-351PBT-CI Instrukcja

2 Października 2024
Seca

Seca 877 Instrukcja

1 Października 2024
Seca

Seca 700 Instrukcja

1 Października 2024
Seca

Seca 770 Instrukcja

1 Października 2024
Seca

Seca 755 Instrukcja

1 Października 2024